mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
0fed36dd48
Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
89 lines
3.4 KiB
Diff
89 lines
3.4 KiB
Diff
From c5324b25fe98c7a4784248b53a75720b226436c2 Mon Sep 17 00:00:00 2001
|
|
From: Li Jun <jun.li@nxp.com>
|
|
Date: Tue, 29 Oct 2019 17:40:25 +0800
|
|
Subject: [PATCH] MLK-22675 usb: dwc3: host: disable park mode
|
|
|
|
- Advantage of park mode
|
|
When only a single Async endpoint is active.
|
|
|
|
- Behavior of park mode
|
|
1. The controller prefetches data/TRBs to do 3 * burst_size worth
|
|
of packets.
|
|
2. When park mode is disabled there will be some delay between
|
|
bursts on the USB. This can be avoided if park mode is enabled
|
|
in cases of only one endpoint is active.
|
|
3. But this delay is significant only with systems of large
|
|
latencies.
|
|
4. We have noticed that in cases where a device NAKs often, it
|
|
tends to bring down the performance for a single endpoint case.
|
|
|
|
- Issue on "park mode"
|
|
1. LSP (List Processor) goes in and out of park mode irrespective
|
|
of the fact that there are more endpoints active. #LSP consider
|
|
that there is only one endpoint active.
|
|
2. This causes master scheduler and transaction handlers to think
|
|
that they are in park mode even though they are not. This is
|
|
because request to transaction handlers, generated by HSCH is
|
|
in park mode when the request is made
|
|
3. This causes a case where the master scheduler calculates wrongly
|
|
the number of TRB cache space available.
|
|
4. Because of the wrongly calculated number of TRB spaces, the core
|
|
fetches more TRBS than there is space for.
|
|
5. This causes overwriting the TRB cache area into the TRQ cache
|
|
area which is next to the TRB cache area.
|
|
6. This causes invalidating an entry in the TRQ
|
|
7. This causes transaction handlers to ignore a request in the TRQ
|
|
which it should have processed.
|
|
8. This causes the main scheduler to hang because it is waiting for
|
|
status from transaction handler.
|
|
9. This causes host controller to hang.
|
|
|
|
- Work Around
|
|
Disabling park mode for super speed by setting GUCTL1[17] to be 1.
|
|
|
|
The STAR number is 9001415732, which is target to be released around
|
|
May,2020.
|
|
|
|
Reviewed-by: Peter Chen <peter.chen@nxp.com>
|
|
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
|
|
Signed-off-by: Li Jun <jun.li@nxp.com>
|
|
---
|
|
drivers/usb/dwc3/core.c | 15 +++++++++++++++
|
|
drivers/usb/dwc3/core.h | 1 +
|
|
2 files changed, 16 insertions(+)
|
|
|
|
--- a/drivers/usb/dwc3/core.c
|
|
+++ b/drivers/usb/dwc3/core.c
|
|
@@ -1033,6 +1033,21 @@ static int dwc3_core_init(struct dwc3 *d
|
|
reg |= DWC3_GUCTL_HSTINAUTORETRY;
|
|
|
|
dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
|
|
+
|
|
+ /*
|
|
+ * Disable Park Mode for super speed:
|
|
+ * Park mode is used in host mode when only a single async
|
|
+ * endpoint is active, but which has a known issue cause
|
|
+ * USB3.0 HC may die when read and write at the same time,
|
|
+ * considering the advantages of this mode are minimal,
|
|
+ * this issue only impacts super speed and exist on all IP
|
|
+ * versions, disable it for SS, Synopsys will release a formal
|
|
+ * STAR 9001415732, and disable it by default in next IP
|
|
+ * release.
|
|
+ */
|
|
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
|
|
+ reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
|
|
+ dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
|
|
}
|
|
|
|
/*
|
|
--- a/drivers/usb/dwc3/core.h
|
|
+++ b/drivers/usb/dwc3/core.h
|
|
@@ -254,6 +254,7 @@
|
|
#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)
|
|
#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)
|
|
#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
|
|
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)
|
|
|
|
/* Global Status Register */
|
|
#define DWC3_GSTS_OTG_IP BIT(10)
|