ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 17:18:59 +00:00
Code Issues Actions 9 Packages Projects Releases Wiki Activity
e55af8a4b0
openwrt/target/linux/layerscape/patches-4.14/812-flexspi-support-layerscape.patch
Koen Vandeputte f4bea1b6a3 kernel: bump 4.14 to 4.14.171 
Refreshed all patches.

Fixes:
- CVE-2013-1798

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2020-02-24 14:18:59 +01:00

1577 lines
46 KiB
Diff
Raw Blame History

From 9875df1e872eb2b0f9d2d72c9a761a5f03400d9f Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Fri, 19 Apr 2019 13:23:01 +0800
Subject: [PATCH] flexspi: support layerscape
This is an integrated patch of flexspi for layerscape
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
---
.../devicetree/bindings/mtd/nxp-flexspi.txt | 41 +
drivers/mtd/spi-nor/Kconfig | 10 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/nxp-flexspi.c | 1404 +++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 13 +-
include/linux/mtd/cfi.h | 1 +
include/linux/mtd/spi-nor.h | 3 +-
7 files changed, 1470 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/nxp-flexspi.txt
create mode 100644 drivers/mtd/spi-nor/nxp-flexspi.c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nxp-flexspi.txt
@@ -0,0 +1,41 @@
+* NXP Flex Serial Peripheral Interface(FlexSPI)
+
+Required properties:
+ - compatible : Should be "nxp,lx2160a-fspi"
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - reg-names: Should contain the reg names "FSPI" and "FSPI-memory"
+ - interrupts : Should contain the interrupt for the device
+ - clocks : The clocks needed by the FlexSPI controller
+ - clock-names : Should contain the name of the clocks: "fspi_en" and "fspi"
+
+Optional properties:
+ - nxp,fspi-has-second-chip: The controller has two buses, bus A and bus B.
+ Each bus can be connected with two NOR flashes.
+ Most of the time, each bus only has one NOR flash
+ connected, this is the default case.
+ But if there are two NOR flashes connected to the
+ bus, you should enable this property.
+ (Please check the board's schematic.)
+Example:
+fspi0: flexspi@20c0000 {
+ compatible = "nxp,lx2160a-fspi";
+ reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "FSPI", "FSPI-memory";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "fspi_en", "fspi";
+
+ status = "okay";
+ nxp,fspi-has-second-chip;
+ flash0: mt35xu512aba@0 {
+ reg = <0>;
+ ....
+ };
+
+ flash1: mt35xu512aba@1 {
+ reg = <1>;
+ ....
+ };
+
+};
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -97,6 +97,16 @@ config SPI_NXP_SPIFI
Flash. Enable this option if you have a device with a SPIFI
controller and want to access the Flash as a mtd device.
+config SPI_NXP_FLEXSPI
+ tristate "NXP Flex SPI controller"
+ help
+ This enables support for the Flex SPI controller in master mode.
+ Up to four slave devices can be connected on two buses with two
+ chipselects each.
+ This controller does not support generic SPI messages and only
+ supports the high-level SPI memory interface using SPI-NOR
+ framework.
+
config SPI_INTEL_SPI
tristate
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-qua
obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o
obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o
obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
+obj-$(CONFIG_SPI_NXP_FLEXSPI) += nxp-flexspi.o
obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o
obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o
obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o
--- /dev/null
+++ b/drivers/mtd/spi-nor/nxp-flexspi.c
@@ -0,0 +1,1404 @@
+/*
+ * NXP FSPI(FlexSPI controller) driver.
+ *
+ * Copyright 2018 NXP
+ * Author: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/completion.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+#include <linux/pci.h>
+
+/* The registers */
+#define FSPI_MCR0 0x00
+#define FSPI_MCR0_AHB_TIMEOUT_SHIFT 24
+#define FSPI_MCR0_AHB_TIMEOUT_MASK (0xFF << FSPI_MCR0_AHB_TIMEOUT_SHIFT)
+#define FSPI_MCR0_IP_TIMEOUT_SHIFT 16
+#define FSPI_MCR0_IP_TIMEOUT_MASK (0xFF << FSPI_MCR0_IP_TIMEOUT_SHIFT)
+#define FSPI_MCR0_LEARN_EN_SHIFT 15
+#define FSPI_MCR0_LEARN_EN_MASK (1 << FSPI_MCR0_LEARN_EN_SHIFT)
+#define FSPI_MCR0_SCRFRUN_EN_SHIFT 14
+#define FSPI_MCR0_SCRFRUN_EN_MASK (1 << FSPI_MCR0_SCRFRUN_EN_SHIFT)
+#define FSPI_MCR0_OCTCOMB_EN_SHIFT 13
+#define FSPI_MCR0_OCTCOMB_EN_MASK (1 << FSPI_MCR0_OCTCOMB_EN_SHIFT)
+#define FSPI_MCR0_DOZE_EN_SHIFT 12
+#define FSPI_MCR0_DOZE_EN_MASK (1 << FSPI_MCR0_DOZE_EN_SHIFT)
+#define FSPI_MCR0_HSEN_SHIFT 11
+#define FSPI_MCR0_HSEN_MASK (1 << FSPI_MCR0_HSEN_SHIFT)
+#define FSPI_MCR0_SERCLKDIV_SHIFT 8
+#define FSPI_MCR0_SERCLKDIV_MASK (7 << FSPI_MCR0_SERCLKDIV_SHIFT)
+#define FSPI_MCR0_ATDF_EN_SHIFT 7
+#define FSPI_MCR0_ATDF_EN_MASK (1 << FSPI_MCR0_ATDF_EN_SHIFT)
+#define FSPI_MCR0_ARDF_EN_SHIFT 6
+#define FSPI_MCR0_ARDF_EN_MASK (1 << FSPI_MCR0_ARDF_EN_SHIFT)
+#define FSPI_MCR0_RXCLKSRC_SHIFT 4
+#define FSPI_MCR0_RXCLKSRC_MASK (3 << FSPI_MCR0_RXCLKSRC_SHIFT)
+#define FSPI_MCR0_END_CFG_SHIFT 2
+#define FSPI_MCR0_END_CFG_MASK (3 << FSPI_MCR0_END_CFG_SHIFT)
+#define FSPI_MCR0_MDIS_SHIFT 1
+#define FSPI_MCR0_MDIS_MASK (1 << FSPI_MCR0_MDIS_SHIFT)
+#define FSPI_MCR0_SWRST_SHIFT 0
+#define FSPI_MCR0_SWRST_MASK (1 << FSPI_MCR0_SWRST_SHIFT)
+
+#define FSPI_MCR1 0x04
+#define FSPI_MCR1_SEQ_TIMEOUT_SHIFT 16
+#define FSPI_MCR1_SEQ_TIMEOUT_MASK \
+ (0xFFFF << FSPI_MCR1_SEQ_TIMEOUT_SHIFT)
+#define FSPI_MCR1_AHB_TIMEOUT_SHIFT 0
+#define FSPI_MCR1_AHB_TIMEOUT_MASK \
+ (0xFFFF << FSPI_MCR1_AHB_TIMEOUT_SHIFT)
+
+#define FSPI_MCR2 0x08
+#define FSPI_MCR2_IDLE_WAIT_SHIFT 24
+#define FSPI_MCR2_IDLE_WAIT_MASK (0xFF << FSPI_MCR2_IDLE_WAIT_SHIFT)
+#define FSPI_MCR2_SAMEFLASH_SHIFT 15
+#define FSPI_MCR2_SAMEFLASH_MASK (1 << FSPI_MCR2_SAMEFLASH_SHIFT)
+#define FSPI_MCR2_CLRLRPHS_SHIFT 14
+#define FSPI_MCR2_CLRLRPHS_MASK (1 << FSPI_MCR2_CLRLRPHS_SHIFT)
+#define FSPI_MCR2_ABRDATSZ_SHIFT 8
+#define FSPI_MCR2_ABRDATSZ_MASK (1 << FSPI_MCR2_ABRDATSZ_SHIFT)
+#define FSPI_MCR2_ABRLEARN_SHIFT 7
+#define FSPI_MCR2_ABRLEARN_MASK (1 << FSPI_MCR2_ABRLEARN_SHIFT)
+#define FSPI_MCR2_ABR_READ_SHIFT 6
+#define FSPI_MCR2_ABR_READ_MASK (1 << FSPI_MCR2_ABR_READ_SHIFT)
+#define FSPI_MCR2_ABRWRITE_SHIFT 5
+#define FSPI_MCR2_ABRWRITE_MASK (1 << FSPI_MCR2_ABRWRITE_SHIFT)
+#define FSPI_MCR2_ABRDUMMY_SHIFT 4
+#define FSPI_MCR2_ABRDUMMY_MASK (1 << FSPI_MCR2_ABRDUMMY_SHIFT)
+#define FSPI_MCR2_ABR_MODE_SHIFT 3
+#define FSPI_MCR2_ABR_MODE_MASK (1 << FSPI_MCR2_ABR_MODE_SHIFT)
+#define FSPI_MCR2_ABRCADDR_SHIFT 2
+#define FSPI_MCR2_ABRCADDR_MASK (1 << FSPI_MCR2_ABRCADDR_SHIFT)
+#define FSPI_MCR2_ABRRADDR_SHIFT 1
+#define FSPI_MCR2_ABRRADDR_MASK (1 << FSPI_MCR2_ABRRADDR_SHIFT)
+#define FSPI_MCR2_ABR_CMD_SHIFT 0
+#define FSPI_MCR2_ABR_CMD_MASK (1 << FSPI_MCR2_ABR_CMD_SHIFT)
+
+#define FSPI_AHBCR 0x0c
+#define FSPI_AHBCR_RDADDROPT_SHIFT 6
+#define FSPI_AHBCR_RDADDROPT_MASK (1 << FSPI_AHBCR_RDADDROPT_SHIFT)
+#define FSPI_AHBCR_PREF_EN_SHIFT 5
+#define FSPI_AHBCR_PREF_EN_MASK (1 << FSPI_AHBCR_PREF_EN_SHIFT)
+#define FSPI_AHBCR_BUFF_EN_SHIFT 4
+#define FSPI_AHBCR_BUFF_EN_MASK (1 << FSPI_AHBCR_BUFF_EN_SHIFT)
+#define FSPI_AHBCR_CACH_EN_SHIFT 3
+#define FSPI_AHBCR_CACH_EN_MASK (1 << FSPI_AHBCR_CACH_EN_SHIFT)
+#define FSPI_AHBCR_CLRTXBUF_SHIFT 2
+#define FSPI_AHBCR_CLRTXBUF_MASK (1 << FSPI_AHBCR_CLRTXBUF_SHIFT)
+#define FSPI_AHBCR_CLRRXBUF_SHIFT 1
+#define FSPI_AHBCR_CLRRXBUF_MASK (1 << FSPI_AHBCR_CLRRXBUF_SHIFT)
+#define FSPI_AHBCR_PAR_EN_SHIFT 0
+#define FSPI_AHBCR_PAR_EN_MASK (1 << FSPI_AHBCR_PAR_EN_SHIFT)
+
+#define FSPI_INTEN 0x10
+#define FSPI_INTEN_SCLKSBWR_SHIFT 9
+#define FSPI_INTEN_SCLKSBWR_MASK (1 << FSPI_INTEN_SCLKSBWR_SHIFT)
+#define FSPI_INTEN_SCLKSBRD_SHIFT 8
+#define FSPI_INTEN_SCLKSBRD_MASK (1 << FSPI_INTEN_SCLKSBRD_SHIFT)
+#define FSPI_INTEN_DATALRNFL_SHIFT 7
+#define FSPI_INTEN_DATALRNFL_MASK (1 << FSPI_INTEN_DATALRNFL_SHIFT)
+#define FSPI_INTEN_IPTXWE_SHIFT 6
+#define FSPI_INTEN_IPTXWE_MASK (1 << FSPI_INTEN_IPTXWE_SHIFT)
+#define FSPI_INTEN_IPRXWA_SHIFT 5
+#define FSPI_INTEN_IPRXWA_MASK (1 << FSPI_INTEN_IPRXWA_SHIFT)
+#define FSPI_INTEN_AHBCMDERR_SHIFT 4
+#define FSPI_INTEN_AHBCMDERR_MASK (1 << FSPI_INTEN_AHBCMDERR_SHIFT)
+#define FSPI_INTEN_IPCMDERR_SHIFT 3
+#define FSPI_INTEN_IPCMDERR_MASK (1 << FSPI_INTEN_IPCMDERR_SHIFT)
+#define FSPI_INTEN_AHBCMDGE_SHIFT 2
+#define FSPI_INTEN_AHBCMDGE_MASK (1 << FSPI_INTEN_AHBCMDGE_SHIFT)
+#define FSPI_INTEN_IPCMDGE_SHIFT 1
+#define FSPI_INTEN_IPCMDGE_MASK (1 << FSPI_INTEN_IPCMDGE_SHIFT)
+#define FSPI_INTEN_IPCMDDONE_SHIFT 0
+#define FSPI_INTEN_IPCMDDONE_MASK (1 << FSPI_INTEN_IPCMDDONE_SHIFT)
+
+#define FSPI_INTR 0x14
+#define FSPI_INTR_SCLKSBWR_SHIFT 9
+#define FSPI_INTR_SCLKSBWR_MASK (1 << FSPI_INTR_SCLKSBWR_SHIFT)
+#define FSPI_INTR_SCLKSBRD_SHIFT 8
+#define FSPI_INTR_SCLKSBRD_MASK (1 << FSPI_INTR_SCLKSBRD_SHIFT)
+#define FSPI_INTR_DATALRNFL_SHIFT 7
+#define FSPI_INTR_DATALRNFL_MASK (1 << FSPI_INTR_DATALRNFL_SHIFT)
+#define FSPI_INTR_IPTXWE_SHIFT 6
+#define FSPI_INTR_IPTXWE_MASK (1 << FSPI_INTR_IPTXWE_SHIFT)
+#define FSPI_INTR_IPRXWA_SHIFT 5
+#define FSPI_INTR_IPRXWA_MASK (1 << FSPI_INTR_IPRXWA_SHIFT)
+#define FSPI_INTR_AHBCMDERR_SHIFT 4
+#define FSPI_INTR_AHBCMDERR_MASK (1 << FSPI_INTR_AHBCMDERR_SHIFT)
+#define FSPI_INTR_IPCMDERR_SHIFT 3
+#define FSPI_INTR_IPCMDERR_MASK (1 << FSPI_INTR_IPCMDERR_SHIFT)
+#define FSPI_INTR_AHBCMDGE_SHIFT 2
+#define FSPI_INTR_AHBCMDGE_MASK (1 << FSPI_INTR_AHBCMDGE_SHIFT)
+#define FSPI_INTR_IPCMDGE_SHIFT 1
+#define FSPI_INTR_IPCMDGE_MASK (1 << FSPI_INTR_IPCMDGE_SHIFT)
+#define FSPI_INTR_IPCMDDONE_SHIFT 0
+#define FSPI_INTR_IPCMDDONE_MASK (1 << FSPI_INTR_IPCMDDONE_SHIFT)
+
+#define FSPI_LUTKEY 0x18
+#define FSPI_LUTKEY_VALUE 0x5AF05AF0
+
+#define FSPI_LCKCR 0x1C
+#define FSPI_LCKER_LOCK 0x1
+#define FSPI_LCKER_UNLOCK 0x2
+
+#define FSPI_BUFXCR_INVALID_MSTRID 0xe
+#define FSPI_AHBRX_BUF0CR0 0x20
+#define FSPI_AHBRX_BUF1CR0 0x24
+#define FSPI_AHBRX_BUF2CR0 0x28
+#define FSPI_AHBRX_BUF3CR0 0x2C
+#define FSPI_AHBRX_BUF4CR0 0x30
+#define FSPI_AHBRX_BUF5CR0 0x34
+#define FSPI_AHBRX_BUF6CR0 0x38
+#define FSPI_AHBRX_BUF7CR0 0x3C
+#define FSPI_AHBRXBUF0CR7_PREF_SHIFT 31
+#define FSPI_AHBRXBUF0CR7_PREF_MASK (1 << FSPI_AHBRXBUF0CR7_PREF_SHIFT)
+
+#define FSPI_AHBRX_BUF0CR1 0x40
+#define FSPI_AHBRX_BUF1CR1 0x44
+#define FSPI_AHBRX_BUF2CR1 0x48
+#define FSPI_AHBRX_BUF3CR1 0x4C
+#define FSPI_AHBRX_BUF4CR1 0x50
+#define FSPI_AHBRX_BUF5CR1 0x54
+#define FSPI_AHBRX_BUF6CR1 0x58
+#define FSPI_AHBRX_BUF7CR1 0x5C
+#define FSPI_BUFXCR1_MSID_SHIFT 0
+#define FSPI_BUFXCR1_MSID_MASK (0xF << FSPI_BUFXCR1_MSID_SHIFT)
+#define FSPI_BUFXCR1_PRIO_SHIFT 8
+#define FSPI_BUFXCR1_PRIO_MASK (0x7 << FSPI_BUFXCR1_PRIO_SHIFT)
+
+#define FSPI_FLSHA1CR0 0x60
+#define FSPI_FLSHA2CR0 0x64
+#define FSPI_FLSHB1CR0 0x68
+#define FSPI_FLSHB2CR0 0x6C
+#define FSPI_FLSHXCR0_SZ_SHIFT 10
+#define FSPI_FLSHXCR0_SZ_MASK (0x3FFFFF << FSPI_FLSHXCR0_SZ_SHIFT)
+
+#define FSPI_FLSHA1CR1 0x70
+#define FSPI_FLSHA2CR1 0x74
+#define FSPI_FLSHB1CR1 0x78
+#define FSPI_FLSHB2CR1 0x7C
+#define FSPI_FLSHXCR1_CSINTR_SHIFT 16
+#define FSPI_FLSHXCR1_CSINTR_MASK \
+ (0xFFFF << FSPI_FLSHXCR1_CSINTR_SHIFT)
+#define FSPI_FLSHXCR1_CAS_SHIFT 11
+#define FSPI_FLSHXCR1_CAS_MASK (0xF << FSPI_FLSHXCR1_CAS_SHIFT)
+#define FSPI_FLSHXCR1_WA_SHIFT 10
+#define FSPI_FLSHXCR1_WA_MASK (1 << FSPI_FLSHXCR1_WA_SHIFT)
+#define FSPI_FLSHXCR1_TCSH_SHIFT 5
+#define FSPI_FLSHXCR1_TCSH_MASK (0x1F << FSPI_FLSHXCR1_TCSH_SHIFT)
+#define FSPI_FLSHXCR1_TCSS_SHIFT 0
+#define FSPI_FLSHXCR1_TCSS_MASK (0x1F << FSPI_FLSHXCR1_TCSS_SHIFT)
+
+#define FSPI_FLSHA1CR2 0x80
+#define FSPI_FLSHA2CR2 0x84
+#define FSPI_FLSHB1CR2 0x88
+#define FSPI_FLSHB2CR2 0x8C
+#define FSPI_FLSHXCR2_CLRINSP_SHIFT 24
+#define FSPI_FLSHXCR2_CLRINSP_MASK (1 << FSPI_FLSHXCR2_CLRINSP_SHIFT)
+#define FSPI_FLSHXCR2_AWRWAIT_SHIFT 16
+#define FSPI_FLSHXCR2_AWRWAIT_MASK (0xFF << FSPI_FLSHXCR2_AWRWAIT_SHIFT)
+#define FSPI_FLSHXCR2_AWRSEQN_SHIFT 13
+#define FSPI_FLSHXCR2_AWRSEQN_MASK (0x7 << FSPI_FLSHXCR2_AWRSEQN_SHIFT)
+#define FSPI_FLSHXCR2_AWRSEQI_SHIFT 8
+#define FSPI_FLSHXCR2_AWRSEQI_MASK (0xF << FSPI_FLSHXCR2_AWRSEQI_SHIFT)
+#define FSPI_FLSHXCR2_ARDSEQN_SHIFT 5
+#define FSPI_FLSHXCR2_ARDSEQN_MASK (0x7 << FSPI_FLSHXCR2_ARDSEQN_SHIFT)
+#define FSPI_FLSHXCR2_ARDSEQI_SHIFT 0
+#define FSPI_FLSHXCR2_ARDSEQI_MASK (0xF << FSPI_FLSHXCR2_ARDSEQI_SHIFT)
+
+#define FSPI_IPCR0 0xA0
+
+#define FSPI_IPCR1 0xA4
+#define FSPI_IPCR1_IPAREN_SHIFT 31
+#define FSPI_IPCR1_IPAREN_MASK (1 << FSPI_IPCR1_IPAREN_SHIFT)
+#define FSPI_IPCR1_SEQNUM_SHIFT 24
+#define FSPI_IPCR1_SEQNUM_MASK (0xF << FSPI_IPCR1_SEQNUM_SHIFT)
+#define FSPI_IPCR1_SEQID_SHIFT 16
+#define FSPI_IPCR1_SEQID_MASK (0xF << FSPI_IPCR1_SEQID_SHIFT)
+#define FSPI_IPCR1_IDATSZ_SHIFT 0
+#define FSPI_IPCR1_IDATSZ_MASK (0xFFFF << FSPI_IPCR1_IDATSZ_SHIFT)
+
+#define FSPI_IPCMD 0xB0
+#define FSPI_IPCMD_TRG_SHIFT 0
+#define FSPI_IPCMD_TRG_MASK (1 << FSPI_IPCMD_TRG_SHIFT)
+
+#define FSPI_DLPR 0xB4
+
+#define FSPI_IPRXFCR 0xB8
+#define FSPI_IPRXFCR_CLR_SHIFT 0
+#define FSPI_IPRXFCR_CLR_MASK (1 << FSPI_IPRXFCR_CLR_SHIFT)
+#define FSPI_IPRXFCR_DMA_EN_SHIFT 1
+#define FSPI_IPRXFCR_DMA_EN_MASK (1 << FSPI_IPRXFCR_DMA_EN_SHIFT)
+#define FSPI_IPRXFCR_WMRK_SHIFT 2
+#define FSPI_IPRXFCR_WMRK_MASK (0x1F << FSPI_IPRXFCR_WMRK_SHIFT)
+
+#define FSPI_IPTXFCR 0xBC
+#define FSPI_IPTXFCR_CLR_SHIFT 0
+#define FSPI_IPTXFCR_CLR_MASK (1 << FSPI_IPTXFCR_CLR_SHIFT)
+#define FSPI_IPTXFCR_DMA_EN_SHIFT 1
+#define FSPI_IPTXFCR_DMA_EN_MASK (1 << FSPI_IPTXFCR_DMA_EN_SHIFT)
+#define FSPI_IPTXFCR_WMRK_SHIFT 2
+#define FSPI_IPTXFCR_WMRK_MASK (0x1F << FSPI_IPTXFCR_WMRK_SHIFT)
+
+#define FSPI_DLLACR 0xC0
+#define FSPI_DLLACR_OVRDEN_SHIFT 8
+#define FSPI_DLLACR_OVRDEN_MASK (1 << FSPI_DLLACR_OVRDEN_SHIFT)
+
+#define FSPI_DLLBCR 0xC4
+#define FSPI_DLLBCR_OVRDEN_SHIFT 8
+#define FSPI_DLLBCR_OVRDEN_MASK (1 << FSPI_DLLBCR_OVRDEN_SHIFT)
+
+#define FSPI_STS0 0xE0
+#define FSPI_STS0_DLPHA_SHIFT 9
+#define FSPI_STS0_DLPHA_MASK (0x1F << FSPI_STS0_DLPHA_SHIFT)
+#define FSPI_STS0_DLPHB_SHIFT 4
+#define FSPI_STS0_DLPHB_MASK (0x1F << FSPI_STS0_DLPHB_SHIFT)
+#define FSPI_STS0_CMD_SRC_SHIFT 2
+#define FSPI_STS0_CMD_SRC_MASK (3 << FSPI_STS0_CMD_SRC_SHIFT)
+#define FSPI_STS0_ARB_IDLE_SHIFT 1
+#define FSPI_STS0_ARB_IDLE_MASK (1 << FSPI_STS0_ARB_IDLE_SHIFT)
+#define FSPI_STS0_SEQ_IDLE_SHIFT 0
+#define FSPI_STS0_SEQ_IDLE_MASK (1 << FSPI_STS0_SEQ_IDLE_SHIFT)
+
+#define FSPI_STS1 0xE4
+#define FSPI_STS1_IP_ERRCD_SHIFT 24
+#define FSPI_STS1_IP_ERRCD_MASK (0xF << FSPI_STS1_IP_ERRCD_SHIFT)
+#define FSPI_STS1_IP_ERRID_SHIFT 16
+#define FSPI_STS1_IP_ERRID_MASK (0xF << FSPI_STS1_IP_ERRID_SHIFT)
+#define FSPI_STS1_AHB_ERRCD_SHIFT 8
+#define FSPI_STS1_AHB_ERRCD_MASK (0xF << FSPI_STS1_AHB_ERRCD_SHIFT)
+#define FSPI_STS1_AHB_ERRID_SHIFT 0
+#define FSPI_STS1_AHB_ERRID_MASK (0xF << FSPI_STS1_AHB_ERRID_SHIFT)
+
+#define FSPI_AHBSPNST 0xEC
+#define FSPI_AHBSPNST_DATLFT_SHIFT 16
+#define FSPI_AHBSPNST_DATLFT_MASK \
+ (0xFFFF << FSPI_AHBSPNST_DATLFT_SHIFT)
+#define FSPI_AHBSPNST_BUFID_SHIFT 1
+#define FSPI_AHBSPNST_BUFID_MASK (7 << FSPI_AHBSPNST_BUFID_SHIFT)
+#define FSPI_AHBSPNST_ACTIVE_SHIFT 0
+#define FSPI_AHBSPNST_ACTIVE_MASK (1 << FSPI_AHBSPNST_ACTIVE_SHIFT)
+
+#define FSPI_IPRXFSTS 0xF0
+#define FSPI_IPRXFSTS_RDCNTR_SHIFT 16
+#define FSPI_IPRXFSTS_RDCNTR_MASK \
+ (0xFFFF << FSPI_IPRXFSTS_RDCNTR_SHIFT)
+#define FSPI_IPRXFSTS_FILL_SHIFT 0
+#define FSPI_IPRXFSTS_FILL_MASK (0xFF << FSPI_IPRXFSTS_FILL_SHIFT)
+
+#define FSPI_IPTXFSTS 0xF4
+#define FSPI_IPTXFSTS_WRCNTR_SHIFT 16
+#define FSPI_IPTXFSTS_WRCNTR_MASK \
+ (0xFFFF << FSPI_IPTXFSTS_WRCNTR_SHIFT)
+#define FSPI_IPTXFSTS_FILL_SHIFT 0
+#define FSPI_IPTXFSTS_FILL_MASK (0xFF << FSPI_IPTXFSTS_FILL_SHIFT)
+
+#define FSPI_RFDR 0x100
+#define FSPI_TFDR 0x180
+
+#define FSPI_LUT_BASE 0x200
+
+/* register map end */
+
+/*
+ * The definition of the LUT register shows below:
+ *
+ * ---------------------------------------------------
+ * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 |
+ * ---------------------------------------------------
+ */
+#define OPRND0_SHIFT 0
+#define PAD0_SHIFT 8
+#define INSTR0_SHIFT 10
+#define OPRND1_SHIFT 16
+
+/* Instruction set for the LUT register. */
+
+#define LUT_STOP 0x00
+#define LUT_CMD 0x01
+#define LUT_ADDR 0x02
+#define LUT_CADDR_SDR 0x03
+#define LUT_MODE 0x04
+#define LUT_MODE2 0x05
+#define LUT_MODE4 0x06
+#define LUT_MODE8 0x07
+#define LUT_NXP_WRITE 0x08
+#define LUT_NXP_READ 0x09
+#define LUT_LEARN_SDR 0x0A
+#define LUT_DATSZ_SDR 0x0B
+#define LUT_DUMMY 0x0C
+#define LUT_DUMMY_RWDS_SDR 0x0D
+#define LUT_JMP_ON_CS 0x1F
+#define LUT_CMD_DDR 0x21
+#define LUT_ADDR_DDR 0x22
+#define LUT_CADDR_DDR 0x23
+#define LUT_MODE_DDR 0x24
+#define LUT_MODE2_DDR 0x25
+#define LUT_MODE4_DDR 0x26
+#define LUT_MODE8_DDR 0x27
+#define LUT_WRITE_DDR 0x28
+#define LUT_READ_DDR 0x29
+#define LUT_LEARN_DDR 0x2A
+#define LUT_DATSZ_DDR 0x2B
+#define LUT_DUMMY_DDR 0x2C
+#define LUT_DUMMY_RWDS_DDR 0x2D
+
+
+/*
+ * The PAD definitions for LUT register.
+ *
+ * The pad stands for the lines number of IO[0:3].
+ * For example, the Quad read need four IO lines, so you should
+ * set LUT_PAD4 which means we use four IO lines.
+ */
+#define LUT_PAD1 0
+#define LUT_PAD2 1
+#define LUT_PAD4 2
+#define LUT_PAD8 3
+
+/* Oprands for the LUT register. */
+#define ADDR24BIT 0x18
+#define ADDR32BIT 0x20
+
+/* Macros for constructing the LUT register. */
+#define LUT0(ins, pad, opr) \
+ (((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \
+ ((LUT_##ins) << INSTR0_SHIFT))
+
+#define LUT1(ins, pad, opr) (LUT0(ins, pad, opr) << OPRND1_SHIFT)
+
+/* other macros for LUT register. */
+#define FSPI_LUT(x) (FSPI_LUT_BASE + (x) * 4)
+#define FSPI_LUT_NUM 128
+
+/* SEQID -- we can have 32 seqids at most. */
+#define SEQID_READ 0
+#define SEQID_WREN 1
+#define SEQID_WRDI 2
+#define SEQID_RDSR 3
+#define SEQID_SE 4
+#define SEQID_CHIP_ERASE 5
+#define SEQID_PP 6
+#define SEQID_RDID 7
+#define SEQID_WRSR 8
+#define SEQID_RDCR 9
+#define SEQID_EN4B 10
+#define SEQID_BRWR 11
+#define SEQID_RD_EVCR 12
+#define SEQID_WD_EVCR 13
+#define SEQID_RDFSR 14
+
+#define FSPI_MIN_IOMAP SZ_4M
+
+#define FSPI_RX_MAX_IPBUF_SIZE 0x200 /* 64 * 64bits */
+#define FSPI_TX_MAX_IPBUF_SIZE 0x400 /* 128 * 64bits */
+#define FSPI_RX_MAX_AHBBUF_SIZE 0x800 /* 256 * 64bits */
+#define FSPI_TX_MAX_AHBBUF_SIZE 0x40 /* 8 * 64bits */
+
+#define TX_IPBUF_SIZE FSPI_TX_MAX_IPBUF_SIZE
+#define RX_IPBUF_SIZE FSPI_RX_MAX_IPBUF_SIZE
+#define RX_AHBBUF_SIZE FSPI_RX_MAX_AHBBUF_SIZE
+#define TX_AHBBUF_SIZE FSPI_TX_MAX_AHBBUF_SIZE
+
+#define FSPI_SINGLE_MODE 1
+#define FSPI_OCTAL_MODE 8
+
+#define FSPINOR_OP_READ_1_1_8_4B 0x7c
+
+enum nxp_fspi_devtype {
+ NXP_FSPI_LX2160A,
+};
+
+struct nxp_fspi_devtype_data {
+ enum nxp_fspi_devtype devtype;
+ int rxfifo;
+ int txfifo;
+ int ahb_buf_size;
+ int driver_data;
+};
+
+static struct nxp_fspi_devtype_data lx2160a_data = {
+ .devtype = NXP_FSPI_LX2160A,
+ .rxfifo = RX_IPBUF_SIZE,
+ .txfifo = TX_IPBUF_SIZE,
+ .ahb_buf_size = RX_AHBBUF_SIZE,
+ .driver_data = 0,
+};
+
+#define NXP_FSPI_MAX_CHIP 4
+struct nxp_fspi {
+ struct mtd_info mtd[NXP_FSPI_MAX_CHIP];
+ struct spi_nor nor[NXP_FSPI_MAX_CHIP];
+ void __iomem *iobase;
+ void __iomem *ahb_addr;
+ u32 memmap_phy;
+ u32 memmap_offs;
+ u32 memmap_len;
+ struct clk *clk, *clk_en;
+ struct device *dev;
+ struct completion c;
+ struct nxp_fspi_devtype_data *devtype_data;
+ u32 nor_size;
+ u32 nor_num;
+ u32 clk_rate;
+ u32 spi_rx_bus_width;
+ u32 spi_tx_bus_width;
+ unsigned int chip_base_addr; /* We may support two chips. */
+ bool has_second_chip;
+ struct mutex lock;
+ struct pm_qos_request pm_qos_req;
+};
+
+static inline void nxp_fspi_unlock_lut(struct nxp_fspi *fspi)
+{
+ writel(FSPI_LUTKEY_VALUE, fspi->iobase + FSPI_LUTKEY);
+ writel(FSPI_LCKER_UNLOCK, fspi->iobase + FSPI_LCKCR);
+}
+
+static inline void nxp_fspi_lock_lut(struct nxp_fspi *fspi)
+{
+ writel(FSPI_LUTKEY_VALUE, fspi->iobase + FSPI_LUTKEY);
+ writel(FSPI_LCKER_LOCK, fspi->iobase + FSPI_LCKCR);
+}
+
+static irqreturn_t nxp_fspi_irq_handler(int irq, void *dev_id)
+{
+ struct nxp_fspi *fspi = dev_id;
+ u32 reg;
+
+ reg = readl(fspi->iobase + FSPI_INTR);
+ writel(FSPI_INTR_IPCMDDONE_MASK, fspi->iobase + FSPI_INTR);
+ if (reg & FSPI_INTR_IPCMDDONE_MASK)
+ complete(&fspi->c);
+
+ return IRQ_HANDLED;
+}
+
+static void nxp_fspi_init_lut(struct nxp_fspi *fspi)
+{
+ void __iomem *base = fspi->iobase;
+ struct spi_nor *nor = &fspi->nor[0];
+ u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
+ u32 lut_base;
+ u8 op, dm;
+ int i;
+
+ nxp_fspi_unlock_lut(fspi);
+
+ /* Clear all the LUT table */
+ for (i = 0; i < FSPI_LUT_NUM; i++)
+ writel(0, base + FSPI_LUT_BASE + i * 4);
+
+ /* Read */
+ lut_base = SEQID_READ * 4;
+ op = nor->read_opcode;
+ dm = nor->read_dummy;
+
+ if (fspi->spi_rx_bus_width == FSPI_OCTAL_MODE) {
+ dm = 8;
+ op = FSPINOR_OP_READ_1_1_8_4B;
+ writel(LUT0(CMD, PAD1, op) | LUT1(ADDR, PAD1, addrlen),
+ base + FSPI_LUT(lut_base));
+ writel(LUT0(DUMMY, PAD8, dm) | LUT1(NXP_READ, PAD8, 0),
+ base + FSPI_LUT(lut_base + 1));
+ } else {
+ if ((op == SPINOR_OP_READ_FAST_4B) ||
+ (op == SPINOR_OP_READ_FAST) ||
+ (op == SPINOR_OP_READ) ||
+ (op == SPINOR_OP_READ_4B)) {
+ dm = 8;
+ writel(LUT0(CMD, PAD1, op) | LUT1(ADDR, PAD1, addrlen),
+ base + FSPI_LUT(lut_base));
+ writel(LUT0(DUMMY, PAD1, dm) | LUT1(NXP_READ, PAD1, 0),
+ base + FSPI_LUT(lut_base + 1));
+ } else if (nor->read_proto == SNOR_PROTO_1_4_4) {
+ dev_dbg(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
+ /* TODO Add support for other Read ops. */
+ } else {
+ dev_dbg(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
+ }
+ }
+
+ /* Write enable */
+ lut_base = SEQID_WREN * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + FSPI_LUT(lut_base));
+
+ /* Page Program */
+ lut_base = SEQID_PP * 4;
+ writel(LUT0(CMD, PAD1, nor->program_opcode) | LUT1(ADDR, PAD1, addrlen),
+ base + FSPI_LUT(lut_base));
+ writel(LUT0(NXP_WRITE, PAD1, 0), base + FSPI_LUT(lut_base + 1));
+
+ /* Read Status */
+ lut_base = SEQID_RDSR * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(NXP_READ, PAD1, 0x1),
+ base + FSPI_LUT(lut_base));
+
+ /* Erase a sector */
+ lut_base = SEQID_SE * 4;
+ writel(LUT0(CMD, PAD1, nor->erase_opcode) | LUT1(ADDR, PAD1, addrlen),
+ base + FSPI_LUT(lut_base));
+
+ /* Erase the whole chip */
+ lut_base = SEQID_CHIP_ERASE * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
+ base + FSPI_LUT(lut_base));
+
+ /* READ ID */
+ lut_base = SEQID_RDID * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(NXP_READ, PAD1, 0x8),
+ base + FSPI_LUT(lut_base));
+
+ /* Write Register */
+ lut_base = SEQID_WRSR * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(NXP_WRITE, PAD1, 0x2),
+ base + FSPI_LUT(lut_base));
+
+ /* Read Configuration Register */
+ lut_base = SEQID_RDCR * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(NXP_READ, PAD1, 0x1),
+ base + FSPI_LUT(lut_base));
+
+ /* Write disable */
+ lut_base = SEQID_WRDI * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + FSPI_LUT(lut_base));
+
+ /* Enter 4 Byte Mode (Micron) */
+ lut_base = SEQID_EN4B * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + FSPI_LUT(lut_base));
+
+ /* Enter 4 Byte Mode (Spansion) */
+ lut_base = SEQID_BRWR * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + FSPI_LUT(lut_base));
+
+ /* Read EVCR register */
+ lut_base = SEQID_RD_EVCR * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_RD_EVCR),
+ base + FSPI_LUT(lut_base));
+
+ /* Write EVCR register */
+ lut_base = SEQID_WD_EVCR * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_WD_EVCR),
+ base + FSPI_LUT(lut_base));
+
+ /* Read Flag Status */
+ lut_base = SEQID_RDFSR * 4;
+ writel(LUT0(CMD, PAD1, SPINOR_OP_RDFSR) | LUT1(NXP_READ, PAD1, 0x1),
+ base + FSPI_LUT(lut_base));
+
+ nxp_fspi_lock_lut(fspi);
+}
+
+/* Get the SEQID for the command */
+static int nxp_fspi_get_seqid(struct nxp_fspi *fspi, u8 cmd)
+{
+
+ switch (cmd) {
+ case SPINOR_OP_READ_1_1_4_4B:
+ case SPINOR_OP_READ_1_1_4:
+ case SPINOR_OP_READ:
+ case SPINOR_OP_READ_4B:
+ case SPINOR_OP_READ_FAST:
+ case SPINOR_OP_READ_FAST_4B:
+ return SEQID_READ;
+ case SPINOR_OP_WREN:
+ return SEQID_WREN;
+ case SPINOR_OP_WRDI:
+ return SEQID_WRDI;
+ case SPINOR_OP_RDSR:
+ return SEQID_RDSR;
+ case SPINOR_OP_RDFSR:
+ return SEQID_RDFSR;
+ case SPINOR_OP_BE_4K:
+ case SPINOR_OP_SE:
+ case SPINOR_OP_SE_4B:
+ case SPINOR_OP_BE_4K_4B:
+ return SEQID_SE;
+ case SPINOR_OP_CHIP_ERASE:
+ return SEQID_CHIP_ERASE;
+ case SPINOR_OP_PP:
+ case SPINOR_OP_PP_4B:
+ return SEQID_PP;
+ case SPINOR_OP_RDID:
+ return SEQID_RDID;
+ case SPINOR_OP_WRSR:
+ return SEQID_WRSR;
+ case SPINOR_OP_RDCR:
+ return SEQID_RDCR;
+ case SPINOR_OP_EN4B:
+ return SEQID_EN4B;
+ case SPINOR_OP_BRWR:
+ return SEQID_BRWR;
+ case SPINOR_OP_RD_EVCR:
+ return SEQID_RD_EVCR;
+ case SPINOR_OP_WD_EVCR:
+ return SEQID_WD_EVCR;
+ default:
+ dev_err(fspi->dev, "Unsupported cmd 0x%.2x\n", cmd);
+ break;
+ }
+ return -EINVAL;
+}
+
+static int
+nxp_fspi_runcmd(struct nxp_fspi *fspi, u8 cmd, unsigned int addr, int len)
+{
+ void __iomem *base = fspi->iobase;
+ int seqid;
+ int seqnum = 0;
+ u32 reg;
+ int err;
+ int iprxfcr = 0;
+
+ iprxfcr = readl(fspi->iobase + FSPI_IPRXFCR);
+ /* invalid RXFIFO first */
+ iprxfcr &= ~FSPI_IPRXFCR_DMA_EN_MASK;
+ iprxfcr = iprxfcr | FSPI_IPRXFCR_CLR_MASK;
+ writel(iprxfcr, fspi->iobase + FSPI_IPRXFCR);
+
+ init_completion(&fspi->c);
+ dev_dbg(fspi->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n",
+ fspi->chip_base_addr, addr, len, cmd);
+
+ /* write address */
+ writel(fspi->chip_base_addr + addr, base + FSPI_IPCR0);
+
+ seqid = nxp_fspi_get_seqid(fspi, cmd);
+
+ writel((seqnum << FSPI_IPCR1_SEQNUM_SHIFT) |
+ (seqid << FSPI_IPCR1_SEQID_SHIFT) | len,
+ base + FSPI_IPCR1);
+
+ /* wait till controller is idle */
+ do {
+ reg = readl(base + FSPI_STS0);
+ if ((reg & FSPI_STS0_ARB_IDLE_MASK) &&
+ (reg & FSPI_STS0_SEQ_IDLE_MASK))
+ break;
+ udelay(1);
+ dev_dbg(fspi->dev, "The controller is busy, 0x%x\n", reg);
+ } while (1);
+
+ /* trigger the LUT now */
+ writel(1, base + FSPI_IPCMD);
+
+ /* Wait for the interrupt. */
+ if (!wait_for_completion_timeout(&fspi->c, msecs_to_jiffies(1000))) {
+ dev_err(fspi->dev,
+ "cmd 0x%.2x timeout, addr@%.8x, Status0:0x%.8x, Status1:0x%.8x\n",
+ cmd, addr, readl(base + FSPI_STS0),
+ readl(base + FSPI_STS1));
+ err = -ETIMEDOUT;
+ } else {
+ err = 0;
+ dev_dbg(fspi->dev, "FSPI Intr done,INTR:<0x%.8x>\n",
+ readl(base + FSPI_INTR));
+ }
+
+ return err;
+}
+
+/* Read out the data from the FSPI_RBDR buffer registers. */
+static void nxp_fspi_read_data(struct nxp_fspi *fspi, int len, u8 *rxbuf)
+{
+ int i = 0, j = 0, tmp_size = 0;
+ int size;
+ u32 tmp = 0;
+
+ while (len > 0) {
+
+ size = len / 8;
+
+ for (i = 0; i < size; ++i) {
+ /* Wait for RXFIFO available*/
+ while (!(readl(fspi->iobase + FSPI_INTR)
+ & FSPI_INTR_IPRXWA_MASK))
+ ;
+
+ j = 0;
+ tmp_size = 8;
+ while (tmp_size > 0) {
+ tmp = 0;
+ tmp = readl(fspi->iobase + FSPI_RFDR + j * 4);
+ memcpy(rxbuf, &tmp, 4);
+ tmp_size -= 4;
+ j++;
+ rxbuf += 4;
+ }
+
+ /* move the FIFO pointer */
+ writel(FSPI_INTR_IPRXWA_MASK,
+ fspi->iobase + FSPI_INTR);
+ len -= 8;
+ }
+
+ size = len % 8;
+
+ j = 0;
+ if (size) {
+ /* Wait for RXFIFO available*/
+ while (!(readl(fspi->iobase + FSPI_INTR)
+ & FSPI_INTR_IPRXWA_MASK))
+ ;
+
+ while (len > 0) {
+ tmp = 0;
+ size = (len < 4) ? len : 4;
+ tmp = readl(fspi->iobase + FSPI_RFDR + j * 4);
+ memcpy(rxbuf, &tmp, size);
+ len -= size;
+ j++;
+ rxbuf += size;
+ }
+ }
+
+ /* invalid the RXFIFO */
+ writel(FSPI_IPRXFCR_CLR_MASK,
+ fspi->iobase + FSPI_IPRXFCR);
+
+ writel(FSPI_INTR_IPRXWA_MASK,
+ fspi->iobase + FSPI_INTR);
+ }
+}
+
+static inline void nxp_fspi_invalid(struct nxp_fspi *fspi)
+{
+ u32 reg;
+
+ reg = readl(fspi->iobase + FSPI_MCR0);
+ writel(reg | FSPI_MCR0_SWRST_MASK, fspi->iobase + FSPI_MCR0);
+
+ /*
+ * The minimum delay : 1 AHB + 2 SFCK clocks.
+ * Delay 1 us is enough.
+ */
+ while (readl(fspi->iobase + FSPI_MCR0) & FSPI_MCR0_SWRST_MASK)
+ ;
+}
+
+static ssize_t nxp_fspi_nor_write(struct nxp_fspi *fspi,
+ struct spi_nor *nor, u8 opcode,
+ unsigned int to, u32 *txbuf,
+ unsigned int count)
+{
+ int ret, i, j;
+ int size, tmp_size;
+ u32 data = 0;
+
+ dev_dbg(fspi->dev, "nor write to 0x%.8x:0x%.8x, len : %d\n",
+ fspi->chip_base_addr, to, count);
+
+ /* clear the TX FIFO. */
+ writel(FSPI_IPTXFCR_CLR_MASK, fspi->iobase + FSPI_IPTXFCR);
+
+ size = count / 8;
+ for (i = 0; i < size; i++) {
+ /* Wait for TXFIFO empty*/
+ while (!(readl(fspi->iobase + FSPI_INTR)
+ & FSPI_INTR_IPTXWE_MASK))
+ ;
+ j = 0;
+ tmp_size = 8;
+ while (tmp_size > 0) {
+ data = 0;
+ memcpy(&data, txbuf, 4);
+ writel(data, fspi->iobase + FSPI_TFDR + j * 4);
+ tmp_size -= 4;
+ j++;
+ txbuf += 1;
+ }
+
+ writel(FSPI_INTR_IPTXWE_MASK, fspi->iobase + FSPI_INTR);
+ }
+
+ size = count % 8;
+ if (size) {
+ /* Wait for TXFIFO empty*/
+ while (!(readl(fspi->iobase + FSPI_INTR)
+ & FSPI_INTR_IPTXWE_MASK))
+ ;
+
+ j = 0;
+ tmp_size = 0;
+ while (size > 0) {
+ data = 0;
+ tmp_size = (size < 4) ? size : 4;
+ memcpy(&data, txbuf, tmp_size);
+ writel(data, fspi->iobase + FSPI_TFDR + j * 4);
+ size -= tmp_size;
+ j++;
+ txbuf += 1;
+ }
+
+ writel(FSPI_INTR_IPTXWE_MASK, fspi->iobase + FSPI_INTR);
+ }
+
+ /* Trigger it */
+ ret = nxp_fspi_runcmd(fspi, opcode, to, count);
+
+ if (ret == 0)
+ return count;
+
+ return ret;
+}
+
+static void nxp_fspi_set_map_addr(struct nxp_fspi *fspi)
+{
+ int nor_size = fspi->nor_size >> 10;
+ void __iomem *base = fspi->iobase;
+
+ /*
+ * Supporting same flash device as slaves on different chip-select.
+ * As SAMEDEVICEEN bit set, by default, in mcr2 reg then need not to
+ * configure FLSHA2CRx/FLSHB1CRx/FLSHB2CRx register as setting for
+ * these would be ignored.
+ * Need to Reset SAMEDEVICEEN bit in mcr2 reg, when require to add
+ * support for different flashes.
+ */
+ writel(nor_size, base + FSPI_FLSHA1CR0);
+ writel(0, base + FSPI_FLSHA2CR0);
+ writel(0, base + FSPI_FLSHB1CR0);
+ writel(0, base + FSPI_FLSHB2CR0);
+}
+
+static void nxp_fspi_init_ahb_read(struct nxp_fspi *fspi)
+{
+ void __iomem *base = fspi->iobase;
+ struct spi_nor *nor = &fspi->nor[0];
+ int i = 0;
+ int seqid;
+
+ /* AHB configuration for access buffer 0~7. */
+ for (i = 0; i < 7; i++)
+ writel(0, base + FSPI_AHBRX_BUF0CR0 + 4 * i);
+
+ /*
+ * Set ADATSZ with the maximum AHB buffer size to improve the read
+ * performance.
+ */
+ writel((fspi->devtype_data->ahb_buf_size / 8 |
+ FSPI_AHBRXBUF0CR7_PREF_MASK), base + FSPI_AHBRX_BUF7CR0);
+
+ /* prefetch and no start address alignment limitation */
+ writel(FSPI_AHBCR_PREF_EN_MASK | FSPI_AHBCR_RDADDROPT_MASK,
+ base + FSPI_AHBCR);
+
+
+ /* Set the default lut sequence for AHB Read. */
+ seqid = nxp_fspi_get_seqid(fspi, nor->read_opcode);
+ writel(seqid, base + FSPI_FLSHA1CR2);
+}
+
+/* This function was used to prepare and enable FSPI clock */
+static int nxp_fspi_clk_prep_enable(struct nxp_fspi *fspi)
+{
+ int ret;
+
+ ret = clk_prepare_enable(fspi->clk_en);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(fspi->clk);
+ if (ret) {
+ clk_disable_unprepare(fspi->clk_en);
+ return ret;
+ }
+
+ return 0;
+}
+
+/* This function was used to disable and unprepare FSPI clock */
+static void nxp_fspi_clk_disable_unprep(struct nxp_fspi *fspi)
+{
+ clk_disable_unprepare(fspi->clk);
+ clk_disable_unprepare(fspi->clk_en);
+}
+
+/* We use this function to do some basic init for spi_nor_scan(). */
+static int nxp_fspi_nor_setup(struct nxp_fspi *fspi)
+{
+ void __iomem *base = fspi->iobase;
+ u32 reg;
+
+ /* Reset the module */
+ writel(FSPI_MCR0_SWRST_MASK, base + FSPI_MCR0);
+ do {
+ udelay(1);
+ } while (0x1 & readl(base + FSPI_MCR0));
+
+ /* Disable the module */
+ writel(FSPI_MCR0_MDIS_MASK, base + FSPI_MCR0);
+
+ /* Reset the DLL register to default value */
+ writel(FSPI_DLLACR_OVRDEN_MASK, base + FSPI_DLLACR);
+ writel(FSPI_DLLBCR_OVRDEN_MASK, base + FSPI_DLLBCR);
+
+ /* enable module */
+ writel(FSPI_MCR0_AHB_TIMEOUT_MASK | FSPI_MCR0_IP_TIMEOUT_MASK,
+ base + FSPI_MCR0);
+
+ /* Read the register value */
+ reg = readl(base + FSPI_MCR0);
+
+ /* Init the LUT table. */
+ nxp_fspi_init_lut(fspi);
+
+ /* enable the interrupt */
+ writel(FSPI_INTEN_IPCMDDONE_MASK, fspi->iobase + FSPI_INTEN);
+ return 0;
+}
+
+static int nxp_fspi_nor_setup_last(struct nxp_fspi *fspi)
+{
+ unsigned long rate = fspi->clk_rate;
+ int ret;
+
+ /* disable and unprepare clock to avoid glitch pass to controller */
+ nxp_fspi_clk_disable_unprep(fspi);
+
+ ret = clk_set_rate(fspi->clk, rate);
+ if (ret)
+ return ret;
+
+ ret = nxp_fspi_clk_prep_enable(fspi);
+ if (ret)
+ return ret;
+
+ /* Init the LUT table again. */
+ nxp_fspi_init_lut(fspi);
+
+ /* Init for AHB read */
+ nxp_fspi_init_ahb_read(fspi);
+
+ return 0;
+}
+
+static void nxp_fspi_set_base_addr(struct nxp_fspi *fspi,
+ struct spi_nor *nor)
+{
+ fspi->chip_base_addr = fspi->nor_size * (nor - fspi->nor);
+}
+
+static int nxp_fspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+ int len)
+{
+ int ret;
+ struct nxp_fspi *fspi = nor->priv;
+
+ ret = nxp_fspi_runcmd(fspi, opcode, 0, len);
+ if (ret)
+ return ret;
+
+ nxp_fspi_read_data(fspi, len, buf);
+ return 0;
+}
+
+static int nxp_fspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+ int len)
+{
+ struct nxp_fspi *fspi = nor->priv;
+ int ret;
+
+ if (!buf) {
+ ret = nxp_fspi_runcmd(fspi, opcode, 0, 1);
+ if (ret)
+ return ret;
+
+ if (opcode == SPINOR_OP_CHIP_ERASE)
+ nxp_fspi_invalid(fspi);
+
+ } else if (len > 0) {
+ ret = nxp_fspi_nor_write(fspi, nor, opcode, 0,
+ (u32 *)buf, len);
+ } else {
+ dev_err(fspi->dev, "invalid cmd %d\n", opcode);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static ssize_t nxp_fspi_write(struct spi_nor *nor, loff_t to,
+ size_t len, const u_char *buf)
+{
+ struct nxp_fspi *fspi = nor->priv;
+ ssize_t tx_size = 0, act_wrt = 0, ret = 0;
+
+ while (len > 0) {
+ tx_size = (len > TX_IPBUF_SIZE) ? TX_IPBUF_SIZE : len;
+
+ act_wrt = nxp_fspi_nor_write(fspi, nor, nor->program_opcode, to,
+ (u32 *)buf, tx_size);
+ len -= tx_size;
+ to += tx_size;
+ ret += act_wrt;
+ }
+
+ /* invalid the data in the AHB buffer. */
+ nxp_fspi_invalid(fspi);
+ return ret;
+}
+
+static ssize_t nxp_fspi_read(struct spi_nor *nor, loff_t from,
+ size_t len, u_char *buf)
+{
+ struct nxp_fspi *fspi = nor->priv;
+
+ /* if necessary, ioremap buffer before AHB read, */
+ if (!fspi->ahb_addr) {
+ fspi->memmap_offs = fspi->chip_base_addr + from;
+ fspi->memmap_len = len > FSPI_MIN_IOMAP ?
+ len : FSPI_MIN_IOMAP;
+
+ fspi->ahb_addr = ioremap_nocache(
+ fspi->memmap_phy + fspi->memmap_offs,
+ fspi->memmap_len);
+ if (!fspi->ahb_addr) {
+ dev_err(fspi->dev, "ioremap failed\n");
+ return -ENOMEM;
+ }
+ /* ioremap if the data requested is out of range */
+ } else if (fspi->chip_base_addr + from < fspi->memmap_offs
+ || fspi->chip_base_addr + from + len >
+ fspi->memmap_offs + fspi->memmap_len) {
+ iounmap(fspi->ahb_addr);
+
+ fspi->memmap_offs = fspi->chip_base_addr + from;
+ fspi->memmap_len = len > FSPI_MIN_IOMAP ?
+ len : FSPI_MIN_IOMAP;
+ fspi->ahb_addr = ioremap_nocache(
+ fspi->memmap_phy + fspi->memmap_offs,
+ fspi->memmap_len);
+ if (!fspi->ahb_addr) {
+ dev_err(fspi->dev, "ioremap failed\n");
+ return -ENOMEM;
+ }
+ }
+
+ dev_dbg(fspi->dev, "cmd [%x],read from %p, len:%zd\n",
+ nor->read_opcode, fspi->ahb_addr + fspi->chip_base_addr
+ + from - fspi->memmap_offs, len);
+
+ /* Read out the data directly from the AHB buffer.*/
+ memcpy_toio(buf, fspi->ahb_addr + fspi->chip_base_addr
+ + from - fspi->memmap_offs, len);
+
+ return len;
+}
+
+static int nxp_fspi_erase(struct spi_nor *nor, loff_t offs)
+{
+ struct nxp_fspi *fspi = nor->priv;
+ int ret;
+
+ dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
+ nor->mtd.erasesize / 1024, fspi->chip_base_addr, (u32)offs);
+
+ ret = nxp_fspi_runcmd(fspi, nor->erase_opcode, offs, 0);
+ if (ret)
+ return ret;
+
+ nxp_fspi_invalid(fspi);
+ return 0;
+}
+
+static int nxp_fspi_prep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+ struct nxp_fspi *fspi = nor->priv;
+ int ret;
+
+ mutex_lock(&fspi->lock);
+
+ ret = nxp_fspi_clk_prep_enable(fspi);
+ if (ret)
+ goto err_mutex;
+
+ nxp_fspi_set_base_addr(fspi, nor);
+ return 0;
+
+err_mutex:
+ mutex_unlock(&fspi->lock);
+ return ret;
+}
+
+static void nxp_fspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+ struct nxp_fspi *fspi = nor->priv;
+
+ nxp_fspi_clk_disable_unprep(fspi);
+ mutex_unlock(&fspi->lock);
+}
+
+static const struct of_device_id nxp_fspi_dt_ids[] = {
+ { .compatible = "nxp,lx2160a-fspi", .data = (void *)&lx2160a_data, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids);
+
+static int nxp_fspi_probe(struct platform_device *pdev)
+{
+ struct spi_nor_hwcaps hwcaps = {
+ .mask = SPINOR_OP_READ_FAST_4B |
+ SPINOR_OP_READ_4B |
+ SNOR_HWCAPS_PP
+ };
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct nxp_fspi *fspi;
+ struct resource *res;
+ struct spi_nor *nor;
+ struct mtd_info *mtd;
+ int ret, i = 0;
+ int find_node = 0;
+
+ const struct of_device_id *of_id =
+ of_match_device(nxp_fspi_dt_ids, &pdev->dev);
+
+ fspi = devm_kzalloc(dev, sizeof(*fspi), GFP_KERNEL);
+ if (!fspi)
+ return -ENOMEM;
+
+ fspi->nor_num = of_get_child_count(dev->of_node);
+ if (!fspi->nor_num || fspi->nor_num > 4)
+ return -ENODEV;
+
+ fspi->dev = dev;
+ fspi->devtype_data = (struct nxp_fspi_devtype_data *)of_id->data;
+ platform_set_drvdata(pdev, fspi);
+
+ /* find the resources */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "FSPI");
+ if (!res) {
+ dev_err(dev, "FSPI get resource IORESOURCE_MEM failed\n");
+ return -ENODEV;
+ }
+
+ fspi->iobase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(fspi->iobase))
+ return PTR_ERR(fspi->iobase);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "FSPI-memory");
+ if (!res) {
+ dev_err(dev,
+ "FSPI-memory get resource IORESOURCE_MEM failed\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(dev, res->start, resource_size(res),
+ res->name)) {
+ dev_err(dev, "can't request region for resource %pR\n", res);
+ return -EBUSY;
+ }
+
+ fspi->memmap_phy = res->start;
+
+ /* find the clocks */
+ fspi->clk_en = devm_clk_get(dev, "fspi_en");
+ if (IS_ERR(fspi->clk_en))
+ return PTR_ERR(fspi->clk_en);
+
+ fspi->clk = devm_clk_get(dev, "fspi");
+ if (IS_ERR(fspi->clk))
+ return PTR_ERR(fspi->clk);
+
+ ret = nxp_fspi_clk_prep_enable(fspi);
+ if (ret) {
+ dev_err(dev, "can not enable the clock\n");
+ goto clk_failed;
+ }
+
+ /* find the irq */
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(dev, "failed to get the irq: %d\n", ret);
+ goto irq_failed;
+ }
+
+ ret = devm_request_irq(dev, ret,
+ nxp_fspi_irq_handler, 0, pdev->name, fspi);
+ if (ret) {
+ dev_err(dev, "failed to request irq: %d\n", ret);
+ goto irq_failed;
+ }
+
+ ret = nxp_fspi_nor_setup(fspi);
+ if (ret)
+ goto irq_failed;
+
+ if (of_get_property(np, "nxp,fspi-has-second-chip", NULL))
+ fspi->has_second_chip = true;
+
+ mutex_init(&fspi->lock);
+
+ find_node = 0;
+ /* iterate the subnodes. */
+ for_each_available_child_of_node(dev->of_node, np) {
+ /* skip the holes */
+ if (!fspi->has_second_chip)
+ i *= 2;
+
+ nor = &fspi->nor[i];
+ mtd = &nor->mtd;
+
+ nor->dev = dev;
+ spi_nor_set_flash_node(nor, np);
+ nor->priv = fspi;
+
+ /* fill the hooks */
+ nor->read_reg = nxp_fspi_read_reg;
+ nor->write_reg = nxp_fspi_write_reg;
+ nor->read = nxp_fspi_read;
+ nor->write = nxp_fspi_write;
+ nor->erase = nxp_fspi_erase;
+
+ nor->prepare = nxp_fspi_prep;
+ nor->unprepare = nxp_fspi_unprep;
+
+ ret = of_property_read_u32(np, "spi-max-frequency",
+ &fspi->clk_rate);
+ if (ret < 0)
+ goto next_node;
+
+ /* set the chip address for READID */
+ nxp_fspi_set_base_addr(fspi, nor);
+
+ ret = of_property_read_u32(np, "spi-rx-bus-width",
+ &fspi->spi_rx_bus_width);
+ if (ret < 0)
+ fspi->spi_rx_bus_width = FSPI_SINGLE_MODE;
+
+ ret = of_property_read_u32(np, "spi-tx-bus-width",
+ &fspi->spi_tx_bus_width);
+ if (ret < 0)
+ fspi->spi_tx_bus_width = FSPI_SINGLE_MODE;
+
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
+ if (ret)
+ goto next_node;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret)
+ goto next_node;
+
+ /* Set the correct NOR size now. */
+ if (fspi->nor_size == 0) {
+ fspi->nor_size = mtd->size;
+
+ /* Map the SPI NOR to accessiable address */
+ nxp_fspi_set_map_addr(fspi);
+ }
+
+ /*
+ * The write is working in the unit of the TX FIFO,
+ * not in the unit of the SPI NOR's page size.
+ *
+ * So shrink the spi_nor->page_size if it is larger then the
+ * TX FIFO.
+ */
+ if (nor->page_size > fspi->devtype_data->txfifo)
+ nor->page_size = fspi->devtype_data->txfifo;
+
+ find_node++;
+next_node:
+ i++;
+ }
+
+ if (find_node == 0)
+ goto mutex_failed;
+
+ /* finish the rest init. */
+ ret = nxp_fspi_nor_setup_last(fspi);
+ if (ret)
+ goto last_init_failed;
+
+ nxp_fspi_clk_disable_unprep(fspi);
+ return 0;
+
+last_init_failed:
+ for (i = 0; i < fspi->nor_num; i++) {
+ /* skip the holes */
+ if (!fspi->has_second_chip)
+ i *= 2;
+ mtd_device_unregister(&fspi->mtd[i]);
+ }
+mutex_failed:
+ mutex_destroy(&fspi->lock);
+irq_failed:
+ nxp_fspi_clk_disable_unprep(fspi);
+clk_failed:
+ dev_err(dev, "NXP FSPI probe failed\n");
+ return ret;
+}
+
+static int nxp_fspi_remove(struct platform_device *pdev)
+{
+ struct nxp_fspi *fspi = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < fspi->nor_num; i++) {
+ /* skip the holes */
+ if (!fspi->has_second_chip)
+ i *= 2;
+ mtd_device_unregister(&fspi->nor[i].mtd);
+ }
+
+ /* disable the hardware */
+ writel(FSPI_MCR0_MDIS_MASK, fspi->iobase + FSPI_MCR0);
+
+ mutex_destroy(&fspi->lock);
+
+ if (fspi->ahb_addr)
+ iounmap(fspi->ahb_addr);
+
+ return 0;
+}
+
+static int nxp_fspi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ return 0;
+}
+
+static int nxp_fspi_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver nxp_fspi_driver = {
+ .driver = {
+ .name = "nxp-fspi",
+ .bus = &platform_bus_type,
+ .of_match_table = nxp_fspi_dt_ids,
+ },
+ .probe = nxp_fspi_probe,
+ .remove = nxp_fspi_remove,
+ .suspend = nxp_fspi_suspend,
+ .resume = nxp_fspi_resume,
+};
+module_platform_driver(nxp_fspi_driver);
+
+MODULE_DESCRIPTION("NXP FSPI Controller Driver");
+MODULE_AUTHOR("NXP Semiconductor");
+MODULE_LICENSE("GPL v2");
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -269,6 +269,7 @@ static inline int set_4byte(struct spi_n
u8 cmd;
switch (JEDEC_MFR(info)) {
+ case SNOR_MFR_ST:
case SNOR_MFR_MICRON:
/* Some Micron need WREN command; all will accept it */
need_wren = true;
@@ -1044,7 +1045,7 @@ static const struct flash_info spi_nor_i
{ "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
- /* Micron */
+ /* Micron <--> ST Micro */
{ "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
{ "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
@@ -1059,6 +1060,12 @@ static const struct flash_info spi_nor_i
{ "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
+ /* Micron */
+ {
+ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
+ SECT_4K | USE_FSR | SPI_NOR_4B_OPCODES)
+ },
+
/* PMC */
{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
@@ -2439,6 +2446,7 @@ static int spi_nor_init_params(struct sp
params->quad_enable = macronix_quad_enable;
break;
+ case SNOR_MFR_ST:
case SNOR_MFR_MICRON:
break;
@@ -2757,7 +2765,8 @@ int spi_nor_scan(struct spi_nor *nor, co
mtd->_read = spi_nor_read;
/* NOR protection support for STmicro/Micron chips and similar */
- if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
+ if (JEDEC_MFR(info) == SNOR_MFR_ST ||
+ JEDEC_MFR(info) == SNOR_MFR_MICRON ||
JEDEC_MFR(info) == SNOR_MFR_WINBOND ||
info->flags & SPI_NOR_HAS_LOCK) {
nor->flash_lock = stm_lock;
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -377,6 +377,7 @@ struct cfi_fixup {
#define CFI_MFR_SHARP 0x00B0
#define CFI_MFR_SST 0x00BF
#define CFI_MFR_ST 0x0020 /* STMicroelectronics */
+#define CFI_MFR_MICRON 0x002C /* Micron */
#define CFI_MFR_TOSHIBA 0x0098
#define CFI_MFR_WINBOND 0x00DA
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -23,7 +23,8 @@
#define SNOR_MFR_ATMEL CFI_MFR_ATMEL
#define SNOR_MFR_GIGADEVICE 0xc8
#define SNOR_MFR_INTEL CFI_MFR_INTEL
-#define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */
+#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro */
+#define SNOR_MFR_MICRON CFI_MFR_MICRON /* Micron */
#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
#define SNOR_MFR_SPANSION CFI_MFR_AMD
#define SNOR_MFR_SST CFI_MFR_SST
Reference in New Issue View Git Blame Copy Permalink