mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
3c3825436e
Refreshed all patches. Remove upstreamed: - 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch - 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch Fixes: - CVE-2020-8647 - CVE-2020-8648 (potentially) - CVE-2020-8649 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
436 lines
9.5 KiB
Diff
436 lines
9.5 KiB
Diff
From 169e12f99cf9d5fce752564f32fd8df96461de43 Mon Sep 17 00:00:00 2001
|
|
From: Robert Jones <rjones@gateworks.com>
|
|
Date: Wed, 8 Jan 2020 07:44:23 -0800
|
|
Subject: [PATCH 3/4] ARM: dts: imx: Add GW5913 board support
|
|
|
|
The Gateworks GW5913 is an IMX6 SoC based single board computer with:
|
|
- IMX6Q or IMX6DL
|
|
- 32bit DDR3 DRAM
|
|
- FEC GbE RJ45 front-panel
|
|
- 1x miniPCIe socket with PCI Gen2, USB2
|
|
- 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
|
|
- 6V to 60V DC input connector
|
|
- GPS (ublox ZOE-M8Q)
|
|
- bi-color front-panel LED
|
|
- 256MB NAND boot device
|
|
- nanoSIM socket
|
|
- user pushbutton
|
|
- Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
|
|
|
|
Signed-off-by: Robert Jones <rjones@gateworks.com>
|
|
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
|
|
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 2 +
|
|
arch/arm/boot/dts/imx6dl-gw5913.dts | 14 ++
|
|
arch/arm/boot/dts/imx6q-gw5913.dts | 14 ++
|
|
arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 348 ++++++++++++++++++++++++++++++++++
|
|
4 files changed, 378 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/imx6dl-gw5913.dts
|
|
create mode 100644 arch/arm/boot/dts/imx6q-gw5913.dts
|
|
create mode 100644 arch/arm/boot/dts/imx6qdl-gw5913.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -406,6 +406,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|
imx6dl-gw5904.dtb \
|
|
imx6dl-gw5907.dtb \
|
|
imx6dl-gw5910.dtb \
|
|
+ imx6dl-gw5913.dtb \
|
|
imx6dl-hummingboard.dtb \
|
|
imx6dl-hummingboard-emmc-som-v15.dtb \
|
|
imx6dl-hummingboard-som-v15.dtb \
|
|
@@ -475,6 +476,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|
imx6q-gw5904.dtb \
|
|
imx6q-gw5907.dtb \
|
|
imx6q-gw5910.dtb \
|
|
+ imx6q-gw5913.dtb \
|
|
imx6q-h100.dtb \
|
|
imx6q-hummingboard.dtb \
|
|
imx6q-hummingboard-emmc-som-v15.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
|
|
@@ -0,0 +1,14 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * Copyright 2019 Gateworks Corporation
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "imx6dl.dtsi"
|
|
+#include "imx6qdl-gw5913.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
|
|
+ compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/imx6q-gw5913.dts
|
|
@@ -0,0 +1,14 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * Copyright 2019 Gateworks Corporation
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "imx6q.dtsi"
|
|
+#include "imx6qdl-gw5913.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
|
|
+ compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
|
|
@@ -0,0 +1,348 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * Copyright 2019 Gateworks Corporation
|
|
+ */
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/ {
|
|
+ /* these are used by bootloader for disabling nodes */
|
|
+ aliases {
|
|
+ led0 = &led0;
|
|
+ led1 = &led1;
|
|
+ nand = &gpmi;
|
|
+ usb0 = &usbh1;
|
|
+ usb1 = &usbotg;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = &uart2;
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_gpio_leds>;
|
|
+
|
|
+ led0: user1 {
|
|
+ label = "user1";
|
|
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
|
|
+ default-state = "on";
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ };
|
|
+
|
|
+ led1: user2 {
|
|
+ label = "user2";
|
|
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
|
|
+ default-state = "off";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ memory@10000000 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x10000000 0x20000000>;
|
|
+ };
|
|
+
|
|
+ pps {
|
|
+ compatible = "pps-gpio";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_pps>;
|
|
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ reg_3p3v: regulator-3p3v {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "3P3V";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ reg_5p0v: regulator-5p0v {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "5P0V";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+};
|
|
+
|
|
+&fec {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_enet>;
|
|
+ phy-mode = "rgmii-id";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&gpmi {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2c1 {
|
|
+ clock-frequency = <100000>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_i2c1>;
|
|
+ status = "okay";
|
|
+
|
|
+ gpio@23 {
|
|
+ compatible = "nxp,pca9555";
|
|
+ reg = <0x23>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ };
|
|
+
|
|
+ eeprom@50 {
|
|
+ compatible = "atmel,24c02";
|
|
+ reg = <0x50>;
|
|
+ pagesize = <16>;
|
|
+ };
|
|
+
|
|
+ eeprom@51 {
|
|
+ compatible = "atmel,24c02";
|
|
+ reg = <0x51>;
|
|
+ pagesize = <16>;
|
|
+ };
|
|
+
|
|
+ eeprom@52 {
|
|
+ compatible = "atmel,24c02";
|
|
+ reg = <0x52>;
|
|
+ pagesize = <16>;
|
|
+ };
|
|
+
|
|
+ eeprom@53 {
|
|
+ compatible = "atmel,24c02";
|
|
+ reg = <0x53>;
|
|
+ pagesize = <16>;
|
|
+ };
|
|
+
|
|
+ rtc@68 {
|
|
+ compatible = "dallas,ds1672";
|
|
+ reg = <0x68>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c2 {
|
|
+ clock-frequency = <100000>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_i2c2>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2c3 {
|
|
+ clock-frequency = <100000>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_i2c3>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pcie {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_pcie>;
|
|
+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pwm2 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pwm3 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&pwm4 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
|
|
+ status = "disabled";
|
|
+};
|
|
+
|
|
+&uart1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_uart1>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart2 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_uart2>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart3 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_uart3>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart5 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_uart5>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbotg {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_usbotg>;
|
|
+ disable-over-current;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbh1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&wdog1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinctrl_wdog>;
|
|
+ fsl,ext-reset-output;
|
|
+};
|
|
+
|
|
+&iomuxc {
|
|
+ pinctrl_enet: enetgrp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
|
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
|
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
|
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
|
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
|
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
|
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
|
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
|
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
|
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
|
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
|
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
|
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
|
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_gpio_leds: gpioledsgrp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
|
|
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_gpmi_nand: gpminandgrp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
|
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
|
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
|
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
|
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_i2c1: i2c1grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_i2c2: i2c2grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_i2c3: i2c3grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
|
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_pcie: pciegrp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_pps: ppsgrp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_pwm2: pwm2grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_pwm3: pwm3grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_pwm4: pwm4grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_uart1: uart1grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_uart2: uart2grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
|
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_uart3: uart3grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
|
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_uart5: uart5grp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
|
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_usbotg: usbotggrp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ pinctrl_wdog: wdoggrp {
|
|
+ fsl,pins = <
|
|
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
|
|
+ >;
|
|
+ };
|
|
+};
|