mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
4e0c54bc5b
The following patches were removed because they are integrated in the upstream kernel 5.4: * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch * pending-5.4/220-optimize_inlining.patch * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch Some bigger changes were done to this feature and we did not port this patch yet: * hack-5.4/207-disable-modorder.patch This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes: * hack-5.4/930-crashlog.patch A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations. * pending-5.4/304-mips_disable_fpu.patch - no crashlog support yet as a required file got deleted upstream - Removed patch below, which is now seen as a recursive dependency [1] - Removed patch below due to build error [2] - fix still required to avoid identical function def [3] - Fixes included from Blocktrron - Fixes included from Chunkeey - Fix included from nbd regarding "dst leak in Flow Offload" [1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch [2] target/linux/generic/hack-5.4/207-disable-modorder.patch [3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
75 lines
1.9 KiB
Diff
75 lines
1.9 KiB
Diff
From c9de73988a35c6c85810a992954ac568cca503e5 Mon Sep 17 00:00:00 2001
|
|
From: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Date: Wed, 2 Oct 2019 10:31:10 +0100
|
|
Subject: [PATCH 648/660] net: mdio-i2c: add support for Clause 45 accesses
|
|
|
|
Some SFP+ modules have PHYs on them just like SFP modules do, except
|
|
they are Clause 45 PHYs. The I2C protocol used to access them is
|
|
modified slightly in order to send the device address and 16-bit
|
|
register index.
|
|
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
---
|
|
drivers/net/phy/mdio-i2c.c | 28 ++++++++++++++++++++--------
|
|
1 file changed, 20 insertions(+), 8 deletions(-)
|
|
|
|
--- a/drivers/net/phy/mdio-i2c.c
|
|
+++ b/drivers/net/phy/mdio-i2c.c
|
|
@@ -33,17 +33,24 @@ static int i2c_mii_read(struct mii_bus *
|
|
{
|
|
struct i2c_adapter *i2c = bus->priv;
|
|
struct i2c_msg msgs[2];
|
|
- u8 data[2], dev_addr = reg;
|
|
+ u8 addr[3], data[2], *p;
|
|
int bus_addr, ret;
|
|
|
|
if (!i2c_mii_valid_phy_id(phy_id))
|
|
return 0xffff;
|
|
|
|
+ p = addr;
|
|
+ if (reg & MII_ADDR_C45) {
|
|
+ *p++ = 0x20 | ((reg >> 16) & 31);
|
|
+ *p++ = reg >> 8;
|
|
+ }
|
|
+ *p++ = reg;
|
|
+
|
|
bus_addr = i2c_mii_phy_addr(phy_id);
|
|
msgs[0].addr = bus_addr;
|
|
msgs[0].flags = 0;
|
|
- msgs[0].len = 1;
|
|
- msgs[0].buf = &dev_addr;
|
|
+ msgs[0].len = p - addr;
|
|
+ msgs[0].buf = addr;
|
|
msgs[1].addr = bus_addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = sizeof(data);
|
|
@@ -61,18 +68,23 @@ static int i2c_mii_write(struct mii_bus
|
|
struct i2c_adapter *i2c = bus->priv;
|
|
struct i2c_msg msg;
|
|
int ret;
|
|
- u8 data[3];
|
|
+ u8 data[5], *p;
|
|
|
|
if (!i2c_mii_valid_phy_id(phy_id))
|
|
return 0;
|
|
|
|
- data[0] = reg;
|
|
- data[1] = val >> 8;
|
|
- data[2] = val;
|
|
+ p = data;
|
|
+ if (reg & MII_ADDR_C45) {
|
|
+ *p++ = (reg >> 16) & 31;
|
|
+ *p++ = reg >> 8;
|
|
+ }
|
|
+ *p++ = reg;
|
|
+ *p++ = val >> 8;
|
|
+ *p++ = val;
|
|
|
|
msg.addr = i2c_mii_phy_addr(phy_id);
|
|
msg.flags = 0;
|
|
- msg.len = 3;
|
|
+ msg.len = p - data;
|
|
msg.buf = data;
|
|
|
|
ret = i2c_transfer(i2c, &msg, 1);
|