openwrt/target/linux/bcm27xx/patches-4.19/950-0428-usb-dwc_otg-Clean-up-interrupt-claiming-code.patch
Adrian Schmutzler 7d7aa2fd92 brcm2708: rename target to bcm27xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-02-14 14:10:51 +01:00

158 lines
5.1 KiB
Diff

From efb54d0f0445f3d279a7eae7395b566c96d080de Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 7 May 2019 17:23:41 +0100
Subject: [PATCH] usb: dwc_otg: Clean up interrupt claiming code
The FIQ/IRQ interrupt number identification code is scattered through
the dwc_otg driver. Rationalise it, simplifying the code and solving
an existing issue.
See: https://github.com/raspberrypi/linux/issues/2612
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
drivers/usb/host/dwc_otg/dwc_otg_driver.c | 18 +++++++++-----
drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 10 +++-----
drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 6 +++++
drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c | 26 +++-----------------
4 files changed, 25 insertions(+), 35 deletions(-)
--- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
@@ -624,11 +624,7 @@ static int dwc_otg_driver_remove(
* Free the IRQ
*/
if (otg_dev->common_irq_installed) {
-#ifdef PLATFORM_INTERFACE
- free_irq(platform_get_irq(_dev, 0), otg_dev);
-#else
- free_irq(_dev->irq, otg_dev);
-#endif
+ free_irq(otg_dev->os_dep.irq_num, otg_dev);
} else {
DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__);
return REM_RETVAL(-ENXIO);
@@ -905,7 +901,9 @@ static int dwc_otg_driver_probe(
*/
#if defined(PLATFORM_INTERFACE)
- devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1);
+ devirq = platform_get_irq_byname(_dev, fiq_enable ? "soft" : "usb");
+ if (devirq < 0)
+ devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1);
#else
devirq = _dev->irq;
#endif
@@ -922,6 +920,14 @@ static int dwc_otg_driver_probe(
} else {
dwc_otg_device->common_irq_installed = 1;
}
+ dwc_otg_device->os_dep.irq_num = devirq;
+ dwc_otg_device->os_dep.fiq_num = -EINVAL;
+ if (fiq_enable) {
+ int devfiq = platform_get_irq_byname(_dev, "usb");
+ if (devfiq < 0)
+ devfiq = platform_get_irq(_dev, 1);
+ dwc_otg_device->os_dep.fiq_num = devfiq;
+ }
#ifndef IRQF_TRIGGER_LOW
#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
@@ -492,7 +492,7 @@ static void hcd_init_fiq(void *cookie)
#endif
// Enable FIQ interrupt from USB peripheral
#ifdef CONFIG_ARM64
- irq = platform_get_irq(otg_dev->os_dep.platformdev, 1);
+ irq = otg_dev->os_dep.fiq_num;
if (irq < 0) {
DWC_ERROR("Can't get SIM-FIQ irq");
@@ -509,7 +509,7 @@ static void hcd_init_fiq(void *cookie)
simfiq_irq = irq;
#else
#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
- irq = platform_get_irq(otg_dev->os_dep.platformdev, 1);
+ irq = otg_dev->os_dep.fiq_num;
#else
irq = INTERRUPT_VC_USB;
#endif
@@ -626,11 +626,7 @@ int hcd_init(dwc_bus_dev_t *_dev)
* allocates the DMA buffer pool, registers the USB bus, requests the
* IRQ line, and calls hcd_start method.
*/
-#ifdef PLATFORM_INTERFACE
- retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED);
-#else
- retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED);
-#endif
+ retval = usb_add_hcd(hcd, otg_dev->os_dep.irq_num, IRQF_SHARED);
if (retval < 0) {
goto error2;
}
--- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
@@ -102,6 +102,12 @@ typedef struct os_dependent {
/** Base address for MPHI peripheral */
void *mphi_base;
+ /** IRQ number (<0 if not valid) */
+ int irq_num;
+
+ /** FIQ number (<0 if not valid) */
+ int fiq_num;
+
#ifdef LM_INTERFACE
struct lm_device *lmdev;
#elif defined(PCI_INTERFACE)
--- a/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
@@ -1224,30 +1224,16 @@ int pcd_init(dwc_bus_dev_t *_dev)
/*
* Setup interupt handler
*/
-#ifdef PLATFORM_INTERFACE
DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
- platform_get_irq(_dev, fiq_enable ? 0 : 1));
- retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq,
+ otg_dev->os_dep.irq_num);
+ retval = request_irq(otg_dev->os_dep.irq_num, dwc_otg_pcd_irq,
IRQF_SHARED, gadget_wrapper->gadget.name,
otg_dev->pcd);
if (retval != 0) {
- DWC_ERROR("request of irq%d failed\n",
- platform_get_irq(_dev, fiq_enable ? 0 : 1));
+ DWC_ERROR("request of irq%d failed\n", otg_dev->os_dep.irq_num);
free_wrapper(gadget_wrapper);
return -EBUSY;
}
-#else
- DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
- _dev->irq);
- retval = request_irq(_dev->irq, dwc_otg_pcd_irq,
- IRQF_SHARED | IRQF_DISABLED,
- gadget_wrapper->gadget.name, otg_dev->pcd);
- if (retval != 0) {
- DWC_ERROR("request of irq%d failed\n", _dev->irq);
- free_wrapper(gadget_wrapper);
- return -EBUSY;
- }
-#endif
dwc_otg_pcd_start(gadget_wrapper->pcd, &fops);
@@ -1267,11 +1253,7 @@ void pcd_remove(dwc_bus_dev_t *_dev)
/*
* Free the IRQ
*/
-#ifdef PLATFORM_INTERFACE
- free_irq(platform_get_irq(_dev, 0), pcd);
-#else
- free_irq(_dev->irq, pcd);
-#endif
+ free_irq(otg_dev->os_dep.irq_num, pcd);
dwc_otg_pcd_remove(otg_dev->pcd);
free_wrapper(gadget_wrapper);
otg_dev->pcd = 0;