mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
92 lines
3.3 KiB
Diff
92 lines
3.3 KiB
Diff
From 2bf6a79fb6555b5ebf21d03b1295e017804474c4 Mon Sep 17 00:00:00 2001
|
|
From: Mariusz Bialonczyk <manio@skyboo.net>
|
|
Date: Mon, 4 Mar 2019 12:23:36 +0100
|
|
Subject: [PATCH] w1: ds2482: cosmetic fixes after 54865314f5a1
|
|
|
|
commit 5cb27d30fc3a281e830a2099d520b469e2b82008 upstream.
|
|
|
|
We have a helper function ds2482_calculate_config() which is calculating
|
|
the config value, so just use it instead of passing the same variable
|
|
in all calls to this function.
|
|
|
|
Also fixes the placement of module parameters to match with:
|
|
50fa2951bd74 (w1: Organize driver source to natural/common order)
|
|
by Andrew F. Davis
|
|
|
|
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
|
|
Cc: Andrew Worsley <amworsley@gmail.com>
|
|
Cc: Andrew F. Davis <afd@ti.com>
|
|
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
---
|
|
drivers/w1/masters/ds2482.c | 18 +++++++++++-------
|
|
1 file changed, 11 insertions(+), 7 deletions(-)
|
|
|
|
--- a/drivers/w1/masters/ds2482.c
|
|
+++ b/drivers/w1/masters/ds2482.c
|
|
@@ -37,6 +37,11 @@ module_param_named(active_pullup, ds2482
|
|
MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \
|
|
"0-disable, 1-enable (default)");
|
|
|
|
+/* extra configurations - e.g. 1WS */
|
|
+static int extra_config;
|
|
+module_param(extra_config, int, S_IRUGO | S_IWUSR);
|
|
+MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
|
|
+
|
|
/**
|
|
* The DS2482 registers - there are 3 registers that are addressed by a read
|
|
* pointer. The read pointer is set by the last command executed.
|
|
@@ -70,8 +75,6 @@ MODULE_PARM_DESC(active_pullup, "Active
|
|
#define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */
|
|
#define DS2482_REG_CFG_APU 0x01 /* active pull-up */
|
|
|
|
-/* extra configurations - e.g. 1WS */
|
|
-static int extra_config;
|
|
|
|
/**
|
|
* Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only).
|
|
@@ -130,6 +133,8 @@ struct ds2482_data {
|
|
*/
|
|
static inline u8 ds2482_calculate_config(u8 conf)
|
|
{
|
|
+ conf |= extra_config;
|
|
+
|
|
if (ds2482_active_pullup)
|
|
conf |= DS2482_REG_CFG_APU;
|
|
|
|
@@ -405,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data
|
|
/* If the chip did reset since detect, re-config it */
|
|
if (err & DS2482_REG_STS_RST)
|
|
ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
|
|
- ds2482_calculate_config(extra_config));
|
|
+ ds2482_calculate_config(0x00));
|
|
}
|
|
|
|
mutex_unlock(&pdev->access_lock);
|
|
@@ -431,7 +436,8 @@ static u8 ds2482_w1_set_pullup(void *dat
|
|
ds2482_wait_1wire_idle(pdev);
|
|
/* note: it seems like both SPU and APU have to be set! */
|
|
retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
|
|
- ds2482_calculate_config(extra_config|DS2482_REG_CFG_SPU|DS2482_REG_CFG_APU));
|
|
+ ds2482_calculate_config(DS2482_REG_CFG_SPU |
|
|
+ DS2482_REG_CFG_APU));
|
|
ds2482_wait_1wire_idle(pdev);
|
|
}
|
|
|
|
@@ -484,7 +490,7 @@ static int ds2482_probe(struct i2c_clien
|
|
|
|
/* Set all config items to 0 (off) */
|
|
ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG,
|
|
- ds2482_calculate_config(extra_config));
|
|
+ ds2482_calculate_config(0x00));
|
|
|
|
mutex_init(&data->access_lock);
|
|
|
|
@@ -559,7 +565,5 @@ module_i2c_driver(ds2482_driver);
|
|
|
|
MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
|
|
MODULE_DESCRIPTION("DS2482 driver");
|
|
-module_param(extra_config, int, S_IRUGO | S_IWUSR);
|
|
-MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
|
|
|
|
MODULE_LICENSE("GPL");
|