mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
86 lines
2.7 KiB
Diff
86 lines
2.7 KiB
Diff
From 5c0dfdba54fdaeb813d8535283aa8f75080e1055 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
Date: Tue, 18 Sep 2018 10:47:38 +0100
|
|
Subject: [PATCH] dtoverlays: Correct DT handling camera GPIOs
|
|
|
|
The firmware has support for updating overrides with the correct
|
|
GPIO settings for the camera GPIOs, but the wrong device tree
|
|
setup ended up being merged.
|
|
Correct the DT configuration so that the firmware does set it
|
|
up correctly.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++
|
|
arch/arm/boot/dts/overlays/README | 10 +---------
|
|
arch/arm/boot/dts/overlays/ov5647-overlay.dts | 14 +++++++++++---
|
|
3 files changed, 19 insertions(+), 12 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/bcm270x.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm270x.dtsi
|
|
@@ -152,6 +152,13 @@
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
+
|
|
+ __overrides__ {
|
|
+ cam0-pwdn-ctrl;
|
|
+ cam0-pwdn;
|
|
+ cam0-led-ctrl;
|
|
+ cam0-led;
|
|
+ };
|
|
};
|
|
|
|
&vc4 {
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1366,15 +1366,7 @@ Info: Omnivision OV5647 camera module.
|
|
Uses Unicam 1, which is the standard camera connector on most Pi
|
|
variants.
|
|
Load: dtoverlay=ov5647,<param>=<val>
|
|
-Params: cam0-pwdn GPIO used to control the sensor powerdown line.
|
|
-
|
|
- cam0-led GPIO used to control the sensor led
|
|
- Both these fields should be automatically filled
|
|
- in by the firmware to reflect the default GPIO
|
|
- configuration of the particular Pi variant in
|
|
- use.
|
|
-
|
|
- i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45.
|
|
+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45.
|
|
Useful on Compute Modules.
|
|
|
|
i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
|
|
--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts
|
|
@@ -14,7 +14,7 @@
|
|
status = "okay";
|
|
|
|
ov5647: ov5647@36 {
|
|
- compatible = "ov5647";
|
|
+ compatible = "ovti,ov5647";
|
|
reg = <0x36>;
|
|
status = "okay";
|
|
|
|
@@ -82,10 +82,18 @@
|
|
};
|
|
};
|
|
|
|
+ fragment@6 {
|
|
+ target-path="/__overrides__";
|
|
+ __overlay__ {
|
|
+ cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0";
|
|
+ cam0-pwdn = <&ov5647>,"pwdn-gpios:4";
|
|
+ cam0-led-ctrl = <&ov5647>,"pwdn-gpios:12";
|
|
+ cam0-led = <&ov5647>,"pwdn-gpios:16";
|
|
+ };
|
|
+ };
|
|
+
|
|
__overrides__ {
|
|
i2c_pins_0_1 = <0>,"-2-3+4";
|
|
i2c_pins_28_29 = <0>,"+2-3-4";
|
|
- cam0-pwdn = <&ov5647>,"pwdn-gpios:4";
|
|
- cam0-led = <&ov5647>,"pwdn-gpios:16";
|
|
};
|
|
};
|