Roger Pueyo Centelles 44c7029708 ipq40xx: add support for MikroTik SXTsq 5 ac ... This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD), an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet port. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 256 MB - Storage: 16 MB NOR - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in - 1x Ethernet LED (green) - 7x user-controllable LEDs · 1x power (blue) · 1x user (green) · 5x rssi (green) Note: Serial UART is probably available on the board, but it has not been tested. Flashing: Boot via TFTP the initramfs image. Then, upload a sysupgrade image via SSH and flash it normally. More info at the "Common procedures for MikroTik products" page https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: maurerr <mariusd84@gmail.com>		2021-09-01 08:08:02 +00:00
..
base-files	base-files: fix status display command	2021-09-01 08:07:54 +00:00
boot	uboot-mediatek: unifi6lr: mtd erase before write to flash	2021-09-01 08:08:02 +00:00
devel	valgrind: Fix compile problem with MIPS soft float	2021-09-01 08:07:58 +00:00
firmware	ipq40xx: add support for MikroTik SXTsq 5 ac	2021-09-01 08:08:02 +00:00
kernel	mac80211: minstrel_ht: fix issue in calculating success probability	2021-09-01 08:08:02 +00:00
libs	libsemanage: fix pkgconfig paths	2021-09-01 08:07:59 +00:00
network	iwinfo: update to latest Git HEAD	2021-09-01 08:08:02 +00:00
system	uci: update to the latest master	2021-09-01 08:07:59 +00:00
utils	firmware-utils: bcm4908img: convert into a package	2021-09-01 08:07:55 +00:00
Makefile	build: always build package/kernel/linux	2021-09-01 08:07:05 +00:00