mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
d883eaacd4
The QCA9550 family of SoCs have a slightly different reset sequence compared to older chips. Normally the bootloader performs this sequence, however some bootloader implementation expect the operating system to clear the reset. Also get the PCIe resets from OF to support the second RC of the QCA9558. This is required for the AVM FRITZ!WLAN Repeater 1750E to work, as EVA leaves the PCIe bus in reset. Tested: AVM FRITZ!WLAN Repeater 1750E - OCEDO Koala Signed-off-by: David Bauer <mail@david-bauer.net>
166 lines
3.4 KiB
Plaintext
166 lines
3.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
#include <dt-bindings/clock/ath79-clk.h>
|
|
#include "ath79.dtsi"
|
|
|
|
/ {
|
|
compatible = "qca,ar7240";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "mips,mips24Kc";
|
|
clocks = <&pll ATH79_CLK_CPU>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
ahb: ahb {
|
|
apb {
|
|
ddr_ctrl: memory-controller@18000000 {
|
|
compatible = "qca,ar9132-ddr-controller",
|
|
"qca,ar7240-ddr-controller";
|
|
reg = <0x18000000 0x100>;
|
|
|
|
#qca,ddr-wb-channel-cells = <1>;
|
|
};
|
|
|
|
uart: uart@18020000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x18020000 0x20>;
|
|
interrupts = <3>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "uart";
|
|
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
no-loopback-test;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio: gpio@18040000 {
|
|
compatible = "qca,ar7240-gpio",
|
|
"qca,ar7100-gpio";
|
|
reg = <0x18040000 0x30>;
|
|
interrupts = <2>;
|
|
|
|
ngpios = <18>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pinmux: pinmux@18040028 {
|
|
compatible = "pinctrl-single";
|
|
|
|
reg = <0x18040028 0x8>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
jtag_disable_pins: pinmux_jtag_disable_pins {
|
|
pinctrl-single,bits = <0x0 0x1 0x1>;
|
|
};
|
|
|
|
switch_led_disable_pins: pinmux_switch_led_disable_pins {
|
|
pinctrl-single,bits = <0x0 0x0 0xf8>;
|
|
};
|
|
|
|
clks_disable_pins: pinmux_clks_disable_pins {
|
|
pinctrl-single,bits = <0x0 0x0 0x81f00>;
|
|
};
|
|
};
|
|
|
|
pll: pll-controller@18050000 {
|
|
compatible = "qca,ar7240-pll", "syscon";
|
|
reg = <0x18050000 0x3c>;
|
|
|
|
clock-names = "ref";
|
|
/* The board must provides the ref clock */
|
|
|
|
#clock-cells = <1>;
|
|
clock-output-names = "cpu", "ddr", "ahb";
|
|
};
|
|
|
|
wdt: wdt@18060008 {
|
|
compatible = "qca,ar7130-wdt";
|
|
reg = <0x18060008 0x8>;
|
|
|
|
interrupts = <4>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "wdt";
|
|
};
|
|
|
|
rst: reset-controller@1806001c {
|
|
compatible = "qca,ar7240-reset",
|
|
"qca,ar7100-reset";
|
|
reg = <0x1806001c 0x4>;
|
|
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pcie: pcie-controller@180c0000 {
|
|
compatible = "qcom,ar7240-pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
bus-range = <0x0 0x0>;
|
|
reg = <0x180c0000 0x1000>, /* CRP */
|
|
<0x180f0000 0x100>, /* CTRL */
|
|
<0x14000000 0x1000>; /* CFG */
|
|
reg-names = "crp_base", "ctrl_base", "cfg_base";
|
|
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
|
|
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>;
|
|
|
|
resets = <&rst 6>, <&rst 7>;
|
|
reset-names = "hc", "phy";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-map-mask = <0 0 0 1>;
|
|
interrupt-map = <0 0 0 0 &pcie 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi: spi@1f000000 {
|
|
compatible = "qca,ar7240-spi",
|
|
"qca,ar7100-spi";
|
|
reg = <0x1f000000 0x10>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "ahb";
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpuintc {
|
|
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
|
|
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
|
|
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
|
|
};
|