mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
1db4135e32
Adds preliminary kernel 4.9 support for this target. - Refreshed/Updated all patches Added 3 new patches: - 093 --> Add virtual PCI MMIO mapping - 230 --> Remove deprecated code - 240 --> Rework AT24 eeprom code to use the new NVMEM API Compiled & tested on cns3xxx (gw2388) Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
48 lines
1.4 KiB
Diff
48 lines
1.4 KiB
Diff
--- a/drivers/usb/dwc2/platform.c
|
|
+++ b/drivers/usb/dwc2/platform.c
|
|
@@ -308,6 +308,34 @@ static int __dwc2_lowlevel_hw_enable(str
|
|
return ret;
|
|
}
|
|
|
|
+static const struct dwc2_core_params params_cns3xxx = {
|
|
+ .otg_cap = 2, /* non-HNP/non-SRP capable */
|
|
+ .otg_ver = 0, /* 1.3 */
|
|
+ .dma_enable = 1,
|
|
+ .dma_desc_enable = 0,
|
|
+ .speed = 0, /* High Speed */
|
|
+ .enable_dynamic_fifo = 1,
|
|
+ .en_multiple_tx_fifo = 1,
|
|
+ .host_rx_fifo_size = 658, /* 774 DWORDs */
|
|
+ .host_nperio_tx_fifo_size = 128, /* 256 DWORDs */
|
|
+ .host_perio_tx_fifo_size = 658, /* 512 DWORDs */
|
|
+ .max_transfer_size = 65535,
|
|
+ .max_packet_count = 511,
|
|
+ .host_channels = 16,
|
|
+ .phy_type = 1, /* UTMI */
|
|
+ .phy_utmi_width = 16, /* 8 bits */
|
|
+ .phy_ulpi_ddr = 0, /* Single */
|
|
+ .phy_ulpi_ext_vbus = 0,
|
|
+ .i2c_enable = 0,
|
|
+ .ulpi_fs_ls = 0,
|
|
+ .host_support_fs_ls_low_power = 0,
|
|
+ .host_ls_low_power_phy_clk = 0, /* 48 MHz */
|
|
+ .ts_dline = 0,
|
|
+ .reload_ctl = 0,
|
|
+ .ahbcfg = 0x10,
|
|
+ .uframe_sched = 0,
|
|
+};
|
|
+
|
|
/**
|
|
* dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
|
|
* @hsotg: The driver state
|
|
@@ -552,6 +580,9 @@ static int dwc2_driver_probe(struct plat
|
|
/* Default all params to autodetect */
|
|
dwc2_set_all_params(&defparams, -1);
|
|
params = &defparams;
|
|
+#ifdef CONFIG_ARCH_CNS3XXX
|
|
+ params = ¶ms_cns3xxx;
|
|
+#endif
|
|
|
|
/*
|
|
* Disable descriptor dma mode by default as the HW can support
|