openwrt/target/linux/mediatek/filogic/base-files/etc
Allen Zhao e2f3aefea5 mediatek: filogic: add Unielec U7981-01 support
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 8GB eMMC or 128 MB SPI-NAND
  RAM: 256MB
  Ethernet: 5x 10/100/1000 Mbps
  Switch: MediaTek MT7531AE
  WiFi: MediaTek MT7976C
  Button: Reset
  USB: M.2(B-key) for 4G/5G Module
  Power: DC 12V 1A
  UART: 3.3v, 115200n8
  --------------------------
  |         Layout         |
  |   -----------------    |
  | 4 | VCC RX TX GND | <= |
  |   -----------------    |
  --------------------------

The U-boot menu will automatically appear at startup, and then select
the required options through UP/DOWN Key.

NAND Flash and eMMC Flash instructions:
1. Set your computers IP adress to 192.168.1.2.
2. Run a TFTP server providing the sysupgrade.bin image.
3. Power on the router, into the U-Boot menu.
4. Select "2. Upgrade firmware"
5. Update sysupgrade.bin file name, input server IP and input device
   IP (if they deviate from the defaults)
6. Wait for automatic startup after burning

Signed-off-by: Allen Zhao <allenzhao@unielecinc.com>
(cherry picked from commit 640b0b79ff)
2024-03-31 20:45:20 +02:00
..
board.d mediatek: filogic: add Unielec U7981-01 support 2024-03-31 20:45:20 +02:00
hotplug.d filogic: fix wifi eeprom filename for tuf-ax6000 The router use mt7986_eeprom_mt7976_dual.bin 2024-03-15 23:28:14 +01:00
init.d filogic: support Telenor branded ZyXEL EX5700 2023-12-07 08:00:33 +01:00
uci-defaults mediatek: set new compat version if booted on R64 and R3 2023-06-09 19:23:03 +01:00