mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
e289f18347
Add support for per-BSS airtime weight configuration. This allows to set a airtime weight per BSS as well as a ratio limit based on the weight. Support for this feature is only enabled in the full flavors of hostapd. Consult the hostapd.conf documentation (Airtime policy configuration) for more information on the inner workings of the exposed settings. Signed-off-by: David Bauer <mail@david-bauer.net>
1247 lines
36 KiB
Bash
1247 lines
36 KiB
Bash
. /lib/functions/network.sh
|
|
. /lib/functions.sh
|
|
|
|
wpa_supplicant_add_rate() {
|
|
local var="$1"
|
|
local val="$(($2 / 1000))"
|
|
local sub="$((($2 / 100) % 10))"
|
|
append $var "$val" ","
|
|
[ $sub -gt 0 ] && append $var "."
|
|
}
|
|
|
|
hostapd_add_rate() {
|
|
local var="$1"
|
|
local val="$(($2 / 100))"
|
|
append $var "$val" " "
|
|
}
|
|
|
|
hostapd_append_wep_key() {
|
|
local var="$1"
|
|
|
|
wep_keyidx=0
|
|
set_default key 1
|
|
case "$key" in
|
|
[1234])
|
|
for idx in 1 2 3 4; do
|
|
local zidx
|
|
zidx=$(($idx - 1))
|
|
json_get_var ckey "key${idx}"
|
|
[ -n "$ckey" ] && \
|
|
append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
|
|
done
|
|
wep_keyidx=$((key - 1))
|
|
;;
|
|
*)
|
|
append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
|
|
;;
|
|
esac
|
|
}
|
|
|
|
hostapd_append_wpa_key_mgmt() {
|
|
local auth_type_l="$(echo $auth_type | tr 'a-z' 'A-Z')"
|
|
|
|
case "$auth_type" in
|
|
psk|eap)
|
|
append wpa_key_mgmt "WPA-$auth_type_l"
|
|
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type_l}"
|
|
[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
|
|
;;
|
|
eap192)
|
|
append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
|
|
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
|
|
;;
|
|
eap-eap192)
|
|
append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
|
|
append wpa_key_mgmt "WPA-EAP"
|
|
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
|
|
[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256"
|
|
;;
|
|
sae)
|
|
append wpa_key_mgmt "SAE"
|
|
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
|
|
;;
|
|
psk-sae)
|
|
append wpa_key_mgmt "WPA-PSK"
|
|
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
|
|
[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-PSK-SHA256"
|
|
append wpa_key_mgmt "SAE"
|
|
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
|
|
;;
|
|
owe)
|
|
append wpa_key_mgmt "OWE"
|
|
;;
|
|
esac
|
|
|
|
[ "$auth_osen" = "1" ] && append wpa_key_mgmt "OSEN"
|
|
}
|
|
|
|
hostapd_add_log_config() {
|
|
config_add_boolean \
|
|
log_80211 \
|
|
log_8021x \
|
|
log_radius \
|
|
log_wpa \
|
|
log_driver \
|
|
log_iapp \
|
|
log_mlme
|
|
|
|
config_add_int log_level
|
|
}
|
|
|
|
hostapd_common_add_device_config() {
|
|
config_add_array basic_rate
|
|
config_add_array supported_rates
|
|
|
|
config_add_string country
|
|
config_add_boolean country_ie doth
|
|
config_add_boolean spectrum_mgmt_required
|
|
config_add_int local_pwr_constraint
|
|
config_add_string require_mode
|
|
config_add_boolean legacy_rates
|
|
|
|
config_add_string acs_chan_bias
|
|
config_add_array hostapd_options
|
|
|
|
hostapd_add_log_config
|
|
}
|
|
|
|
hostapd_prepare_device_config() {
|
|
local config="$1"
|
|
local driver="$2"
|
|
|
|
local base="${config%%.conf}"
|
|
local base_cfg=
|
|
|
|
json_get_vars country country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
|
|
acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode
|
|
|
|
hostapd_set_log_options base_cfg
|
|
|
|
set_default country_ie 1
|
|
set_default spectrum_mgmt_required 0
|
|
set_default doth 1
|
|
set_default legacy_rates 1
|
|
set_default airtime_mode 0
|
|
|
|
[ "$hwmode" = "b" ] && legacy_rates=1
|
|
|
|
[ -n "$country" ] && {
|
|
append base_cfg "country_code=$country" "$N"
|
|
|
|
[ "$country_ie" -gt 0 ] && {
|
|
append base_cfg "ieee80211d=1" "$N"
|
|
[ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N"
|
|
[ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N"
|
|
}
|
|
[ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
|
|
}
|
|
|
|
[ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N"
|
|
|
|
local brlist= br
|
|
json_get_values basic_rate_list basic_rate
|
|
local rlist= r
|
|
json_get_values rate_list supported_rates
|
|
|
|
[ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
|
|
[ "$legacy_rates" -eq 0 ] && set_default require_mode g
|
|
|
|
[ "$hwmode" = "g" ] && {
|
|
[ "$legacy_rates" -eq 0 ] && set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000"
|
|
[ -n "$require_mode" ] && set_default basic_rate_list "6000 12000 24000"
|
|
}
|
|
|
|
case "$require_mode" in
|
|
n) append base_cfg "require_ht=1" "$N";;
|
|
ac) append base_cfg "require_vht=1" "$N";;
|
|
esac
|
|
|
|
for r in $rate_list; do
|
|
hostapd_add_rate rlist "$r"
|
|
done
|
|
|
|
for br in $basic_rate_list; do
|
|
hostapd_add_rate brlist "$br"
|
|
done
|
|
|
|
[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
|
|
[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
|
|
append base_cfg "beacon_int=$beacon_int" "$N"
|
|
append base_cfg "dtim_period=$dtim_period" "$N"
|
|
[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
|
|
|
|
json_get_values opts hostapd_options
|
|
for val in $opts; do
|
|
append base_cfg "$val" "$N"
|
|
done
|
|
|
|
cat > "$config" <<EOF
|
|
driver=$driver
|
|
$base_cfg
|
|
EOF
|
|
}
|
|
|
|
hostapd_common_add_bss_config() {
|
|
config_add_string 'bssid:macaddr' 'ssid:string'
|
|
config_add_boolean wds wmm uapsd hidden utf8_ssid
|
|
|
|
config_add_int maxassoc max_inactivity
|
|
config_add_boolean disassoc_low_ack isolate short_preamble
|
|
|
|
config_add_int \
|
|
wep_rekey eap_reauth_period \
|
|
wpa_group_rekey wpa_pair_rekey wpa_master_rekey
|
|
config_add_boolean wpa_strict_rekey
|
|
config_add_boolean wpa_disable_eapol_key_retries
|
|
|
|
config_add_boolean tdls_prohibit
|
|
|
|
config_add_boolean rsn_preauth auth_cache
|
|
config_add_int ieee80211w
|
|
config_add_int eapol_version
|
|
|
|
config_add_string 'auth_server:host' 'server:host'
|
|
config_add_string auth_secret key
|
|
config_add_int 'auth_port:port' 'port:port'
|
|
|
|
config_add_string acct_server
|
|
config_add_string acct_secret
|
|
config_add_int acct_port
|
|
config_add_int acct_interval
|
|
|
|
config_add_string dae_client
|
|
config_add_string dae_secret
|
|
config_add_int dae_port
|
|
|
|
config_add_string nasid
|
|
config_add_string ownip
|
|
config_add_string radius_client_addr
|
|
config_add_string iapp_interface
|
|
config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
|
|
config_add_boolean ca_cert_usesystem ca_cert2_usesystem
|
|
config_add_string subject_match subject_match2
|
|
config_add_array altsubject_match altsubject_match2
|
|
config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2
|
|
config_add_string ieee80211w_mgmt_cipher
|
|
|
|
config_add_int dynamic_vlan vlan_naming
|
|
config_add_string vlan_tagged_interface vlan_bridge
|
|
config_add_string vlan_file
|
|
|
|
config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
|
|
|
|
config_add_string wpa_psk_file
|
|
|
|
config_add_int multi_ap
|
|
|
|
config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
|
|
config_add_int wps_ap_setup_locked wps_independent
|
|
config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
|
|
config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
|
|
|
|
config_add_boolean ieee80211v wnm_sleep_mode bss_transition
|
|
config_add_int time_advertisement
|
|
config_add_string time_zone
|
|
|
|
config_add_boolean ieee80211k rrm_neighbor_report rrm_beacon_report
|
|
|
|
config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
|
|
config_add_int r0_key_lifetime reassociation_deadline
|
|
config_add_string mobility_domain r1_key_holder
|
|
config_add_array r0kh r1kh
|
|
|
|
config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
|
|
|
|
config_add_string macfilter 'macfile:file'
|
|
config_add_array 'maclist:list(macaddr)'
|
|
|
|
config_add_array bssid_blacklist
|
|
config_add_array bssid_whitelist
|
|
|
|
config_add_int mcast_rate
|
|
config_add_array basic_rate
|
|
config_add_array supported_rates
|
|
|
|
config_add_boolean sae_require_mfp
|
|
|
|
config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string'
|
|
|
|
config_add_boolean hs20 disable_dgaf osen
|
|
config_add_int anqp_domain_id
|
|
config_add_int hs20_deauth_req_timeout
|
|
config_add_array hs20_oper_friendly_name
|
|
config_add_array osu_provider
|
|
config_add_array operator_icon
|
|
config_add_array hs20_conn_capab
|
|
config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
|
|
|
|
config_add_int airtime_bss_weight airtime_bss_limit
|
|
}
|
|
|
|
hostapd_set_vlan_file() {
|
|
local ifname="$1"
|
|
local vlan="$2"
|
|
json_get_vars name vid
|
|
echo "${vid} ${ifname}-${name}" >> /var/run/hostapd-${ifname}.vlan
|
|
wireless_add_vlan "${vlan}" "${ifname}-${name}"
|
|
}
|
|
|
|
hostapd_set_vlan() {
|
|
local ifname="$1"
|
|
|
|
rm -f /var/run/hostapd-${ifname}.vlan
|
|
for_each_vlan hostapd_set_vlan_file ${ifname}
|
|
}
|
|
|
|
hostapd_set_psk_file() {
|
|
local ifname="$1"
|
|
local vlan="$2"
|
|
local vlan_id=""
|
|
|
|
json_get_vars mac vid key
|
|
set_default mac "00:00:00:00:00:00"
|
|
[ -n "$vid" ] && vlan_id="vlanid=$vid "
|
|
echo "${vlan_id} ${mac} ${key}" >> /var/run/hostapd-${ifname}.psk
|
|
}
|
|
|
|
hostapd_set_psk() {
|
|
local ifname="$1"
|
|
|
|
rm -f /var/run/hostapd-${ifname}.psk
|
|
for_each_station hostapd_set_psk_file ${ifname}
|
|
}
|
|
|
|
append_hs20_oper_friendly_name() {
|
|
append bss_conf "hs20_oper_friendly_name=$1" "$N"
|
|
}
|
|
|
|
append_osu_provider_service_desc() {
|
|
append bss_conf "osu_service_desc=$1" "$N"
|
|
}
|
|
|
|
append_hs20_icon() {
|
|
local width height lang type path
|
|
config_get width "$1" width
|
|
config_get height "$1" height
|
|
config_get lang "$1" lang
|
|
config_get type "$1" type
|
|
config_get path "$1" path
|
|
|
|
append bss_conf "hs20_icon=$width:$height:$lang:$type:$1:$path" "$N"
|
|
}
|
|
|
|
append_hs20_icons() {
|
|
config_load wireless
|
|
config_foreach append_hs20_icon hs20-icon
|
|
}
|
|
|
|
append_operator_icon() {
|
|
append bss_conf "operator_icon=$1" "$N"
|
|
}
|
|
|
|
append_osu_icon() {
|
|
append bss_conf "osu_icon=$1" "$N"
|
|
}
|
|
|
|
append_osu_provider() {
|
|
local cfgtype osu_server_uri osu_friendly_name osu_nai osu_nai2 osu_method_list
|
|
|
|
config_load wireless
|
|
config_get cfgtype "$1" TYPE
|
|
[ "$cfgtype" != "osu-provider" ] && return
|
|
|
|
append bss_conf "# provider $1" "$N"
|
|
config_get osu_server_uri "$1" osu_server_uri
|
|
config_get osu_nai "$1" osu_nai
|
|
config_get osu_nai2 "$1" osu_nai2
|
|
config_get osu_method_list "$1" osu_method
|
|
|
|
append bss_conf "osu_server_uri=$osu_server_uri" "$N"
|
|
append bss_conf "osu_nai=$osu_nai" "$N"
|
|
append bss_conf "osu_nai2=$osu_nai2" "$N"
|
|
append bss_conf "osu_method_list=$osu_method_list" "$N"
|
|
|
|
config_list_foreach "$1" osu_service_desc append_osu_provider_service_desc
|
|
config_list_foreach "$1" osu_icon append_osu_icon
|
|
|
|
append bss_conf "$N"
|
|
}
|
|
|
|
append_hs20_conn_capab() {
|
|
[ -n "$1" ] && append bss_conf "hs20_conn_capab=$1" "$N"
|
|
}
|
|
|
|
hostapd_set_bss_options() {
|
|
local var="$1"
|
|
local phy="$2"
|
|
local vif="$3"
|
|
|
|
wireless_vif_parse_encryption
|
|
|
|
local bss_conf bss_md5sum
|
|
local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
|
|
|
|
json_get_vars \
|
|
wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_strict_rekey \
|
|
wpa_disable_eapol_key_retries tdls_prohibit \
|
|
maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
|
|
wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
|
|
wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
|
|
macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
|
|
iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
|
|
acct_server acct_secret acct_port acct_interval \
|
|
bss_load_update_period chan_util_avg_period sae_require_mfp \
|
|
multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key \
|
|
airtime_bss_weight airtime_bss_limit
|
|
|
|
set_default isolate 0
|
|
set_default maxassoc 0
|
|
set_default max_inactivity 0
|
|
set_default short_preamble 1
|
|
set_default disassoc_low_ack 1
|
|
set_default hidden 0
|
|
set_default wmm 1
|
|
set_default uapsd 1
|
|
set_default wpa_disable_eapol_key_retries 0
|
|
set_default tdls_prohibit 0
|
|
set_default eapol_version 0
|
|
set_default acct_port 1813
|
|
set_default bss_load_update_period 60
|
|
set_default chan_util_avg_period 600
|
|
set_default utf8_ssid 1
|
|
set_default multi_ap 0
|
|
set_default airtime_bss_weight 0
|
|
set_default airtime_bss_limit 0
|
|
|
|
append bss_conf "ctrl_interface=/var/run/hostapd"
|
|
if [ "$isolate" -gt 0 ]; then
|
|
append bss_conf "ap_isolate=$isolate" "$N"
|
|
fi
|
|
if [ "$maxassoc" -gt 0 ]; then
|
|
append bss_conf "max_num_sta=$maxassoc" "$N"
|
|
fi
|
|
if [ "$max_inactivity" -gt 0 ]; then
|
|
append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
|
|
fi
|
|
|
|
[ "$airtime_bss_weight" -gt 0 ] && append bss_conf "airtime_bss_weight=$airtime_bss_weight" "$N"
|
|
[ "$airtime_bss_limit" -gt 0 ] && append bss_conf "airtime_bss_limit=$airtime_bss_limit" "$N"
|
|
|
|
append bss_conf "bss_load_update_period=$bss_load_update_period" "$N"
|
|
append bss_conf "chan_util_avg_period=$chan_util_avg_period" "$N"
|
|
append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
|
|
append bss_conf "preamble=$short_preamble" "$N"
|
|
append bss_conf "wmm_enabled=$wmm" "$N"
|
|
append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
|
|
append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
|
|
append bss_conf "utf8_ssid=$utf8_ssid" "$N"
|
|
append bss_conf "multi_ap=$multi_ap" "$N"
|
|
|
|
[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
|
|
|
|
[ "$wpa" -gt 0 ] && {
|
|
[ -n "$wpa_group_rekey" ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
|
|
[ -n "$wpa_pair_rekey" ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
|
|
[ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N"
|
|
[ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
|
|
}
|
|
|
|
[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
|
|
[ -n "$acct_server" ] && {
|
|
append bss_conf "acct_server_addr=$acct_server" "$N"
|
|
append bss_conf "acct_server_port=$acct_port" "$N"
|
|
[ -n "$acct_secret" ] && \
|
|
append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
|
|
[ -n "$acct_interval" ] && \
|
|
append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
|
|
}
|
|
|
|
case "$auth_type" in
|
|
sae|owe|eap192|eap-eap192)
|
|
set_default ieee80211w 2
|
|
set_default sae_require_mfp 1
|
|
;;
|
|
psk-sae)
|
|
set_default ieee80211w 1
|
|
set_default sae_require_mfp 1
|
|
;;
|
|
esac
|
|
[ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
|
|
|
|
local vlan_possible=""
|
|
|
|
case "$auth_type" in
|
|
none|owe)
|
|
json_get_vars owe_transition_bssid owe_transition_ssid
|
|
|
|
[ -n "$owe_transition_ssid" ] && append bss_conf "owe_transition_ssid=\"$owe_transition_ssid\"" "$N"
|
|
[ -n "$owe_transition_bssid" ] && append bss_conf "owe_transition_bssid=$owe_transition_bssid" "$N"
|
|
|
|
wps_possible=1
|
|
# Here we make the assumption that if we're in open mode
|
|
# with WPS enabled, we got to be in unconfigured state.
|
|
wps_not_configured=1
|
|
;;
|
|
psk|sae|psk-sae)
|
|
json_get_vars key wpa_psk_file
|
|
if [ ${#key} -eq 64 ]; then
|
|
append bss_conf "wpa_psk=$key" "$N"
|
|
elif [ ${#key} -ge 8 ] && [ ${#key} -le 63 ]; then
|
|
append bss_conf "wpa_passphrase=$key" "$N"
|
|
elif [ -n "$key" ] || [ -z "$wpa_psk_file" ]; then
|
|
wireless_setup_vif_failed INVALID_WPA_PSK
|
|
return 1
|
|
fi
|
|
[ -z "$wpa_psk_file" ] && set_default wpa_psk_file /var/run/hostapd-$ifname.psk
|
|
[ -n "$wpa_psk_file" ] && {
|
|
[ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
|
|
append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
|
|
}
|
|
[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
|
|
|
|
set_default dynamic_vlan 0
|
|
vlan_possible=1
|
|
wps_possible=1
|
|
;;
|
|
eap|eap192|eap-eap192)
|
|
json_get_vars \
|
|
auth_server auth_secret auth_port \
|
|
dae_client dae_secret dae_port \
|
|
ownip radius_client_addr \
|
|
eap_reauth_period
|
|
|
|
# radius can provide VLAN ID for clients
|
|
vlan_possible=1
|
|
|
|
# legacy compatibility
|
|
[ -n "$auth_server" ] || json_get_var auth_server server
|
|
[ -n "$auth_port" ] || json_get_var auth_port port
|
|
[ -n "$auth_secret" ] || json_get_var auth_secret key
|
|
|
|
set_default auth_port 1812
|
|
set_default dae_port 3799
|
|
|
|
|
|
append bss_conf "auth_server_addr=$auth_server" "$N"
|
|
append bss_conf "auth_server_port=$auth_port" "$N"
|
|
append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
|
|
|
|
[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
|
|
|
|
[ -n "$dae_client" -a -n "$dae_secret" ] && {
|
|
append bss_conf "radius_das_port=$dae_port" "$N"
|
|
append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
|
|
}
|
|
|
|
[ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
|
|
[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
|
|
append bss_conf "eapol_key_index_workaround=1" "$N"
|
|
append bss_conf "ieee8021x=1" "$N"
|
|
|
|
[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
|
|
;;
|
|
wep)
|
|
local wep_keyidx=0
|
|
json_get_vars key
|
|
hostapd_append_wep_key bss_conf
|
|
append bss_conf "wep_default_key=$wep_keyidx" "$N"
|
|
[ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
|
|
;;
|
|
esac
|
|
|
|
local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
|
|
append bss_conf "auth_algs=${auth_algs:-1}" "$N"
|
|
append bss_conf "wpa=$wpa" "$N"
|
|
[ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
|
|
|
|
set_default wps_pushbutton 0
|
|
set_default wps_label 0
|
|
set_default wps_pbc_in_m1 0
|
|
|
|
config_methods=
|
|
[ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
|
|
[ "$wps_label" -gt 0 ] && append config_methods label
|
|
|
|
# WPS not possible on Multi-AP backhaul-only SSID
|
|
[ "$multi_ap" = 1 ] && wps_possible=
|
|
|
|
[ -n "$wps_possible" -a -n "$config_methods" ] && {
|
|
set_default ext_registrar 0
|
|
set_default wps_device_type "6-0050F204-1"
|
|
set_default wps_device_name "OpenWrt AP"
|
|
set_default wps_manufacturer "www.openwrt.org"
|
|
set_default wps_independent 1
|
|
|
|
wps_state=2
|
|
[ -n "$wps_configured" ] && wps_state=1
|
|
|
|
[ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
|
|
|
|
append bss_conf "eap_server=1" "$N"
|
|
[ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
|
|
append bss_conf "wps_state=$wps_state" "$N"
|
|
append bss_conf "device_type=$wps_device_type" "$N"
|
|
append bss_conf "device_name=$wps_device_name" "$N"
|
|
append bss_conf "manufacturer=$wps_manufacturer" "$N"
|
|
append bss_conf "config_methods=$config_methods" "$N"
|
|
append bss_conf "wps_independent=$wps_independent" "$N"
|
|
[ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N"
|
|
[ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
|
|
[ "$multi_ap" -gt 0 ] && [ -n "$multi_ap_backhaul_ssid" ] && {
|
|
append bss_conf "multi_ap_backhaul_ssid=\"$multi_ap_backhaul_ssid\"" "$N"
|
|
if [ -z "$multi_ap_backhaul_key" ]; then
|
|
:
|
|
elif [ ${#multi_ap_backhaul_key} -lt 8 ]; then
|
|
wireless_setup_vif_failed INVALID_WPA_PSK
|
|
return 1
|
|
elif [ ${#multi_ap_backhaul_key} -eq 64 ]; then
|
|
append bss_conf "multi_ap_backhaul_wpa_psk=$multi_ap_backhaul_key" "$N"
|
|
else
|
|
append bss_conf "multi_ap_backhaul_wpa_passphrase=$multi_ap_backhaul_key" "$N"
|
|
fi
|
|
}
|
|
}
|
|
|
|
append bss_conf "ssid=$ssid" "$N"
|
|
[ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
|
|
[ -n "$iapp_interface" ] && {
|
|
local ifname
|
|
network_get_device ifname "$iapp_interface" || ifname="$iapp_interface"
|
|
append bss_conf "iapp_interface=$ifname" "$N"
|
|
}
|
|
|
|
json_get_vars ieee80211v
|
|
set_default ieee80211v 0
|
|
if [ "$ieee80211v" -eq "1" ]; then
|
|
json_get_vars time_advertisement time_zone wnm_sleep_mode bss_transition
|
|
|
|
set_default time_advertisement 0
|
|
set_default wnm_sleep_mode 0
|
|
set_default bss_transition 0
|
|
|
|
append bss_conf "time_advertisement=$time_advertisement" "$N"
|
|
[ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
|
|
append bss_conf "wnm_sleep_mode=$wnm_sleep_mode" "$N"
|
|
append bss_conf "bss_transition=$bss_transition" "$N"
|
|
fi
|
|
|
|
json_get_vars ieee80211k
|
|
set_default ieee80211k 0
|
|
if [ "$ieee80211k" -eq "1" ]; then
|
|
json_get_vars rrm_neighbor_report rrm_beacon_report
|
|
|
|
set_default rrm_neighbor_report 1
|
|
set_default rrm_beacon_report 1
|
|
append bss_conf "rrm_neighbor_report=$rrm_neighbor_report" "$N"
|
|
append bss_conf "rrm_beacon_report=$rrm_beacon_report" "$N"
|
|
fi
|
|
|
|
if [ "$wpa" -ge "1" ]; then
|
|
json_get_vars ieee80211r
|
|
set_default ieee80211r 0
|
|
|
|
if [ "$ieee80211r" -gt "0" ]; then
|
|
json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
|
|
|
|
set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
|
|
set_default ft_over_ds 1
|
|
set_default reassociation_deadline 1000
|
|
|
|
case "$auth_type" in
|
|
psk|sae|psk-sae)
|
|
set_default ft_psk_generate_local 1
|
|
;;
|
|
*)
|
|
set_default ft_psk_generate_local 0
|
|
;;
|
|
esac
|
|
|
|
append bss_conf "mobility_domain=$mobility_domain" "$N"
|
|
append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
|
|
append bss_conf "ft_over_ds=$ft_over_ds" "$N"
|
|
append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
|
|
[ -n "$nasid" ] || append bss_conf "nas_identifier=${macaddr//\:}" "$N"
|
|
|
|
if [ "$ft_psk_generate_local" -eq "0" ]; then
|
|
json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
|
|
json_get_values r0kh r0kh
|
|
json_get_values r1kh r1kh
|
|
|
|
set_default r0_key_lifetime 10000
|
|
set_default pmk_r1_push 0
|
|
|
|
[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
|
|
append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
|
|
append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
|
|
|
|
for kh in $r0kh; do
|
|
append bss_conf "r0kh=${kh//,/ }" "$N"
|
|
done
|
|
for kh in $r1kh; do
|
|
append bss_conf "r1kh=${kh//,/ }" "$N"
|
|
done
|
|
fi
|
|
fi
|
|
|
|
append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
|
|
|
|
hostapd_append_wpa_key_mgmt
|
|
[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
|
|
fi
|
|
|
|
if [ "$wpa" -ge "2" ]; then
|
|
if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
|
|
set_default auth_cache 1
|
|
append bss_conf "rsn_preauth=1" "$N"
|
|
append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
|
|
else
|
|
case "$auth_type" in
|
|
sae|psk-sae|owe)
|
|
set_default auth_cache 1
|
|
;;
|
|
*)
|
|
set_default auth_cache 0
|
|
;;
|
|
esac
|
|
fi
|
|
|
|
append bss_conf "okc=$auth_cache" "$N"
|
|
[ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
|
|
|
|
# RSN -> allow management frame protection
|
|
case "$ieee80211w" in
|
|
[012])
|
|
json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
|
|
append bss_conf "ieee80211w=$ieee80211w" "$N"
|
|
[ "$ieee80211w" -gt "0" ] && {
|
|
append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
|
|
[ -n "$ieee80211w_max_timeout" ] && \
|
|
append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
|
|
[ -n "$ieee80211w_retry_timeout" ] && \
|
|
append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
|
|
}
|
|
;;
|
|
esac
|
|
fi
|
|
|
|
_macfile="/var/run/hostapd-$ifname.maclist"
|
|
case "$macfilter" in
|
|
allow)
|
|
append bss_conf "macaddr_acl=1" "$N"
|
|
append bss_conf "accept_mac_file=$_macfile" "$N"
|
|
# accept_mac_file can be used to set MAC to VLAN ID mapping
|
|
vlan_possible=1
|
|
;;
|
|
deny)
|
|
append bss_conf "macaddr_acl=0" "$N"
|
|
append bss_conf "deny_mac_file=$_macfile" "$N"
|
|
;;
|
|
*)
|
|
_macfile=""
|
|
;;
|
|
esac
|
|
|
|
[ -n "$_macfile" ] && {
|
|
json_get_vars macfile
|
|
json_get_values maclist maclist
|
|
|
|
rm -f "$_macfile"
|
|
(
|
|
for mac in $maclist; do
|
|
echo "$mac"
|
|
done
|
|
[ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
|
|
) > "$_macfile"
|
|
}
|
|
|
|
[ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
|
|
json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file
|
|
set_default vlan_naming 1
|
|
[ -z "$vlan_file" ] && set_default vlan_file /var/run/hostapd-$ifname.vlan
|
|
append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
|
|
append bss_conf "vlan_naming=$vlan_naming" "$N"
|
|
[ -n "$vlan_bridge" ] && \
|
|
append bss_conf "vlan_bridge=$vlan_bridge" "$N"
|
|
[ -n "$vlan_tagged_interface" ] && \
|
|
append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
|
|
[ -n "$vlan_file" ] && {
|
|
[ -e "$vlan_file" ] || touch "$vlan_file"
|
|
append bss_conf "vlan_file=$vlan_file" "$N"
|
|
}
|
|
}
|
|
|
|
local hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
|
|
osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
|
|
json_get_vars hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
|
|
osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
|
|
|
|
set_default hs20 0
|
|
set_default disable_dgaf $hs20
|
|
set_default osen 0
|
|
set_default anqp_domain_id 0
|
|
set_default hs20_deauth_req_timeout 60
|
|
if [ "$hs20" = "1" ]; then
|
|
append bss_conf "hs20=1" "$N"
|
|
append_hs20_icons
|
|
append bss_conf "disable_dgaf=$disable_dgaf" "$N"
|
|
append bss_conf "osen=$osen" "$N"
|
|
append bss_conf "anqp_domain_id=$anqp_domain_id" "$N"
|
|
append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N"
|
|
[ -n "$osu_ssid" ] && append bss_conf "osu_ssid=$osu_ssid" "$N"
|
|
[ -n "$hs20_wan_metrics" ] && append bss_conf "hs20_wan_metrics=$hs20_wan_metrics" "$N"
|
|
[ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N"
|
|
[ -n "$hs20_t_c_filename" ] && append bss_conf "hs20_t_c_filename=$hs20_t_c_filename" "$N"
|
|
[ -n "$hs20_t_c_timestamp" ] && append bss_conf "hs20_t_c_timestamp=$hs20_t_c_timestamp" "$N"
|
|
json_for_each_item append_hs20_conn_capab hs20_conn_capab
|
|
json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name
|
|
json_for_each_item append_osu_provider osu_provider
|
|
json_for_each_item append_operator_icon operator_icon
|
|
fi
|
|
|
|
bss_md5sum=$(echo $bss_conf | md5sum | cut -d" " -f1)
|
|
append bss_conf "config_id=$bss_md5sum" "$N"
|
|
|
|
append "$var" "$bss_conf" "$N"
|
|
return 0
|
|
}
|
|
|
|
hostapd_set_log_options() {
|
|
local var="$1"
|
|
|
|
local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
|
|
json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
|
|
|
|
set_default log_level 2
|
|
set_default log_80211 1
|
|
set_default log_8021x 1
|
|
set_default log_radius 1
|
|
set_default log_wpa 1
|
|
set_default log_driver 1
|
|
set_default log_iapp 1
|
|
set_default log_mlme 1
|
|
|
|
local log_mask=$(( \
|
|
($log_80211 << 0) | \
|
|
($log_8021x << 1) | \
|
|
($log_radius << 2) | \
|
|
($log_wpa << 3) | \
|
|
($log_driver << 4) | \
|
|
($log_iapp << 5) | \
|
|
($log_mlme << 6) \
|
|
))
|
|
|
|
append "$var" "logger_syslog=$log_mask" "$N"
|
|
append "$var" "logger_syslog_level=$log_level" "$N"
|
|
append "$var" "logger_stdout=$log_mask" "$N"
|
|
append "$var" "logger_stdout_level=$log_level" "$N"
|
|
|
|
return 0
|
|
}
|
|
|
|
_wpa_supplicant_common() {
|
|
local ifname="$1"
|
|
|
|
_rpath="/var/run/wpa_supplicant"
|
|
_config="${_rpath}-$ifname.conf"
|
|
}
|
|
|
|
wpa_supplicant_teardown_interface() {
|
|
_wpa_supplicant_common "$1"
|
|
rm -rf "$_rpath/$1" "$_config"
|
|
}
|
|
|
|
wpa_supplicant_prepare_interface() {
|
|
local ifname="$1"
|
|
_w_driver="$2"
|
|
|
|
_wpa_supplicant_common "$1"
|
|
|
|
json_get_vars mode wds multi_ap
|
|
|
|
[ -n "$network_bridge" ] && {
|
|
fail=
|
|
case "$mode" in
|
|
adhoc)
|
|
fail=1
|
|
;;
|
|
sta)
|
|
[ "$wds" = 1 -o "$multi_ap" = 1 ] || fail=1
|
|
;;
|
|
esac
|
|
|
|
[ -n "$fail" ] && {
|
|
wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
|
|
return 1
|
|
}
|
|
}
|
|
|
|
local ap_scan=
|
|
|
|
_w_mode="$mode"
|
|
|
|
[ "$mode" = adhoc ] && {
|
|
ap_scan="ap_scan=2"
|
|
}
|
|
|
|
local country_str=
|
|
[ -n "$country" ] && {
|
|
country_str="country=$country"
|
|
}
|
|
|
|
multiap_flag_file="${_config}.is_multiap"
|
|
if [ "$multi_ap" = "1" ]; then
|
|
touch "$multiap_flag_file"
|
|
else
|
|
[ -e "$multiap_flag_file" ] && rm "$multiap_flag_file"
|
|
fi
|
|
wpa_supplicant_teardown_interface "$ifname"
|
|
cat > "$_config" <<EOF
|
|
$ap_scan
|
|
$country_str
|
|
EOF
|
|
return 0
|
|
}
|
|
|
|
wpa_supplicant_set_fixed_freq() {
|
|
local freq="$1"
|
|
local htmode="$2"
|
|
|
|
append network_data "fixed_freq=1" "$N$T"
|
|
append network_data "frequency=$freq" "$N$T"
|
|
case "$htmode" in
|
|
NOHT) append network_data "disable_ht=1" "$N$T";;
|
|
HT20|VHT20) append network_data "disable_ht40=1" "$N$T";;
|
|
HT40*|VHT40*|VHT80*|VHT160*) append network_data "ht40=1" "$N$T";;
|
|
esac
|
|
case "$htmode" in
|
|
VHT*) append network_data "vht=1" "$N$T";;
|
|
esac
|
|
case "$htmode" in
|
|
VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
|
|
VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
|
|
VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";;
|
|
*) append network_data "disable_vht=1" "$N$T";;
|
|
esac
|
|
}
|
|
|
|
wpa_supplicant_add_network() {
|
|
local ifname="$1"
|
|
local freq="$2"
|
|
local htmode="$3"
|
|
local noscan="$4"
|
|
|
|
_wpa_supplicant_common "$1"
|
|
wireless_vif_parse_encryption
|
|
|
|
json_get_vars \
|
|
ssid bssid key \
|
|
basic_rate mcast_rate \
|
|
ieee80211w ieee80211r \
|
|
multi_ap
|
|
|
|
case "$auth_type" in
|
|
sae|owe|eap192|eap-eap192)
|
|
set_default ieee80211w 2
|
|
;;
|
|
psk-sae)
|
|
set_default ieee80211w 1
|
|
;;
|
|
esac
|
|
|
|
set_default ieee80211r 0
|
|
set_default multi_ap 0
|
|
|
|
local key_mgmt='NONE'
|
|
local enc_str=
|
|
local network_data=
|
|
local T=" "
|
|
|
|
local scan_ssid="scan_ssid=1"
|
|
local freq wpa_key_mgmt
|
|
|
|
[ "$_w_mode" = "adhoc" ] && {
|
|
append network_data "mode=1" "$N$T"
|
|
[ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
|
|
[ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
|
|
|
|
scan_ssid="scan_ssid=0"
|
|
|
|
[ "$_w_driver" = "nl80211" ] || append wpa_key_mgmt "WPA-NONE"
|
|
}
|
|
|
|
[ "$_w_mode" = "mesh" ] && {
|
|
json_get_vars mesh_id mesh_fwding mesh_rssi_threshold
|
|
[ -n "$mesh_id" ] && ssid="${mesh_id}"
|
|
|
|
append network_data "mode=5" "$N$T"
|
|
[ -n "$mesh_fwding" ] && append network_data "mesh_fwding=${mesh_fwding}" "$N$T"
|
|
[ -n "$mesh_rssi_threshold" ] && append network_data "mesh_rssi_threshold=${mesh_rssi_threshold}" "$N$T"
|
|
[ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
|
|
[ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
|
|
append wpa_key_mgmt "SAE"
|
|
scan_ssid=""
|
|
}
|
|
|
|
[ "$multi_ap" = 1 -a "$_w_mode" = "sta" ] && append network_data "multi_ap_backhaul_sta=1" "$N$T"
|
|
|
|
case "$auth_type" in
|
|
none) ;;
|
|
owe)
|
|
hostapd_append_wpa_key_mgmt
|
|
key_mgmt="$wpa_key_mgmt"
|
|
;;
|
|
wep)
|
|
local wep_keyidx=0
|
|
hostapd_append_wep_key network_data
|
|
append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
|
|
;;
|
|
wps)
|
|
key_mgmt='WPS'
|
|
;;
|
|
psk|sae|psk-sae)
|
|
local passphrase
|
|
|
|
if [ "$_w_mode" != "mesh" ]; then
|
|
hostapd_append_wpa_key_mgmt
|
|
fi
|
|
|
|
key_mgmt="$wpa_key_mgmt"
|
|
|
|
if [ ${#key} -eq 64 ]; then
|
|
passphrase="psk=${key}"
|
|
else
|
|
if [ "$_w_mode" = "mesh" ]; then
|
|
passphrase="sae_password=\"${key}\""
|
|
else
|
|
passphrase="psk=\"${key}\""
|
|
fi
|
|
fi
|
|
append network_data "$passphrase" "$N$T"
|
|
;;
|
|
eap|eap192|eap-eap192)
|
|
hostapd_append_wpa_key_mgmt
|
|
key_mgmt="$wpa_key_mgmt"
|
|
|
|
json_get_vars eap_type identity anonymous_identity ca_cert ca_cert_usesystem
|
|
|
|
if [ "$ca_cert_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
|
|
append network_data "ca_cert=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
|
|
else
|
|
[ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
|
|
fi
|
|
[ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
|
|
[ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
|
|
case "$eap_type" in
|
|
tls)
|
|
json_get_vars client_cert priv_key priv_key_pwd
|
|
append network_data "client_cert=\"$client_cert\"" "$N$T"
|
|
append network_data "private_key=\"$priv_key\"" "$N$T"
|
|
append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
|
|
|
|
json_get_vars subject_match
|
|
[ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
|
|
|
|
json_get_values altsubject_match altsubject_match
|
|
if [ -n "$altsubject_match" ]; then
|
|
local list=
|
|
for x in $altsubject_match; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "altsubject_match=\"$list\"" "$N$T"
|
|
fi
|
|
|
|
json_get_values domain_match domain_match
|
|
if [ -n "$domain_match" ]; then
|
|
local list=
|
|
for x in $domain_match; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "domain_match=\"$list\"" "$N$T"
|
|
fi
|
|
|
|
json_get_values domain_suffix_match domain_suffix_match
|
|
if [ -n "$domain_suffix_match" ]; then
|
|
local list=
|
|
for x in $domain_suffix_match; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "domain_suffix_match=\"$list\"" "$N$T"
|
|
fi
|
|
;;
|
|
fast|peap|ttls)
|
|
json_get_vars auth password ca_cert2 ca_cert2_usesystem client_cert2 priv_key2 priv_key2_pwd
|
|
set_default auth MSCHAPV2
|
|
|
|
if [ "$auth" = "EAP-TLS" ]; then
|
|
if [ "$ca_cert2_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
|
|
append network_data "ca_cert2=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
|
|
else
|
|
[ -n "$ca_cert2" ] && append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
|
|
fi
|
|
append network_data "client_cert2=\"$client_cert2\"" "$N$T"
|
|
append network_data "private_key2=\"$priv_key2\"" "$N$T"
|
|
append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
|
|
else
|
|
append network_data "password=\"$password\"" "$N$T"
|
|
fi
|
|
|
|
json_get_vars subject_match
|
|
[ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
|
|
|
|
json_get_values altsubject_match altsubject_match
|
|
if [ -n "$altsubject_match" ]; then
|
|
local list=
|
|
for x in $altsubject_match; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "altsubject_match=\"$list\"" "$N$T"
|
|
fi
|
|
|
|
json_get_values domain_match domain_match
|
|
if [ -n "$domain_match" ]; then
|
|
local list=
|
|
for x in $domain_match; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "domain_match=\"$list\"" "$N$T"
|
|
fi
|
|
|
|
json_get_values domain_suffix_match domain_suffix_match
|
|
if [ -n "$domain_suffix_match" ]; then
|
|
local list=
|
|
for x in $domain_suffix_match; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "domain_suffix_match=\"$list\"" "$N$T"
|
|
fi
|
|
|
|
phase2proto="auth="
|
|
case "$auth" in
|
|
"auth"*)
|
|
phase2proto=""
|
|
;;
|
|
"EAP-"*)
|
|
auth="$(echo $auth | cut -b 5- )"
|
|
[ "$eap_type" = "ttls" ] &&
|
|
phase2proto="autheap="
|
|
json_get_vars subject_match2
|
|
[ -n "$subject_match2" ] && append network_data "subject_match2=\"$subject_match2\"" "$N$T"
|
|
|
|
json_get_values altsubject_match2 altsubject_match2
|
|
if [ -n "$altsubject_match2" ]; then
|
|
local list=
|
|
for x in $altsubject_match2; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "altsubject_match2=\"$list\"" "$N$T"
|
|
fi
|
|
|
|
json_get_values domain_match2 domain_match2
|
|
if [ -n "$domain_match2" ]; then
|
|
local list=
|
|
for x in $domain_match2; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "domain_match2=\"$list\"" "$N$T"
|
|
fi
|
|
|
|
json_get_values domain_suffix_match2 domain_suffix_match2
|
|
if [ -n "$domain_suffix_match2" ]; then
|
|
local list=
|
|
for x in $domain_suffix_match2; do
|
|
append list "$x" ";"
|
|
done
|
|
append network_data "domain_suffix_match2=\"$list\"" "$N$T"
|
|
fi
|
|
;;
|
|
esac
|
|
append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
|
|
;;
|
|
esac
|
|
append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
|
|
;;
|
|
esac
|
|
|
|
[ "$mode" = mesh ] || {
|
|
case "$wpa" in
|
|
1)
|
|
append network_data "proto=WPA" "$N$T"
|
|
;;
|
|
2)
|
|
append network_data "proto=RSN" "$N$T"
|
|
;;
|
|
esac
|
|
|
|
case "$ieee80211w" in
|
|
[012])
|
|
[ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
|
|
;;
|
|
esac
|
|
}
|
|
[ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
|
|
[ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
|
|
|
|
local bssid_blacklist bssid_whitelist
|
|
json_get_values bssid_blacklist bssid_blacklist
|
|
json_get_values bssid_whitelist bssid_whitelist
|
|
|
|
[ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
|
|
[ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
|
|
|
|
[ -n "$basic_rate" ] && {
|
|
local br rate_list=
|
|
for br in $basic_rate; do
|
|
wpa_supplicant_add_rate rate_list "$br"
|
|
done
|
|
[ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
|
|
}
|
|
|
|
[ -n "$mcast_rate" ] && {
|
|
local mc_rate=
|
|
wpa_supplicant_add_rate mc_rate "$mcast_rate"
|
|
append network_data "mcast_rate=$mc_rate" "$N$T"
|
|
}
|
|
|
|
if [ "$key_mgnt" = "WPS" ]; then
|
|
echo "wps_cred_processing=1" >> "$_config"
|
|
else
|
|
cat >> "$_config" <<EOF
|
|
network={
|
|
$scan_ssid
|
|
ssid="$ssid"
|
|
key_mgmt=$key_mgmt
|
|
$network_data
|
|
}
|
|
EOF
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
wpa_supplicant_run() {
|
|
local ifname="$1"
|
|
local hostapd_ctrl="$2"
|
|
|
|
_wpa_supplicant_common "$ifname"
|
|
|
|
ubus wait_for wpa_supplicant
|
|
ubus call wpa_supplicant config_add "{ \
|
|
\"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \
|
|
\"iface\": \"$ifname\", \"config\": \"$_config\" \
|
|
${network_bridge:+, \"bridge\": \"$network_bridge\"} \
|
|
${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \
|
|
}"
|
|
|
|
ret="$?"
|
|
|
|
[ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
|
|
|
|
local supplicant_pid=$(ubus call service list '{"name": "wpad"}' | jsonfilter -l 1 -e "@['wpad'].instances['supplicant'].pid")
|
|
wireless_add_process "$supplicant_pid" "/usr/sbin/wpa_supplicant" 1
|
|
|
|
return $ret
|
|
}
|
|
|
|
hostapd_common_cleanup() {
|
|
killall meshd-nl80211
|
|
}
|