openwrt/target/linux/generic/backport-5.15/815-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch
Christian Marangi cf08db988b generic: backport initial LEDs hw control support
Backport initial LEDs hw control support. Currently this is limited to
only rx/tx and link events for the netdev trigger but the API got
accepted and the additional modes are working on and will be backported
later.

Refresh every patch and add the additional config flag for QCA8K new
LEDs support.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 0a4b309f41)
2023-09-04 23:00:34 +01:00

75 lines
2.3 KiB
Diff

From 91acadcc6e599dfc62717abcdad58a459cfb1684 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Mon, 17 Apr 2023 17:17:25 +0200
Subject: [PATCH 3/9] net: dsa: qca8k: add LEDs blink_set() support
Add LEDs blink_set() support to qca8k Switch Family.
These LEDs support hw accellerated blinking at a fixed rate
of 4Hz.
Reject any other value since not supported by the LEDs switch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca/qca8k-leds.c | 38 ++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
--- a/drivers/net/dsa/qca/qca8k-leds.c
+++ b/drivers/net/dsa/qca/qca8k-leds.c
@@ -128,6 +128,43 @@ qca8k_led_brightness_get(struct qca8k_le
}
static int
+qca8k_cled_blink_set(struct led_classdev *ldev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+ u32 mask, val = QCA8K_LED_ALWAYS_BLINK_4HZ;
+ struct qca8k_led_pattern_en reg_info;
+ struct qca8k_priv *priv = led->priv;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 125;
+ *delay_off = 125;
+ }
+
+ if (*delay_on != 125 || *delay_off != 125) {
+ /* The hardware only supports blinking at 4Hz. Fall back
+ * to software implementation in other cases.
+ */
+ return -EINVAL;
+ }
+
+ qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
+
+ if (led->port_num == 0 || led->port_num == 4) {
+ mask = QCA8K_LED_PATTERN_EN_MASK;
+ val <<= QCA8K_LED_PATTERN_EN_SHIFT;
+ } else {
+ mask = QCA8K_LED_PHY123_PATTERN_EN_MASK;
+ }
+
+ regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift,
+ val << reg_info.shift);
+
+ return 0;
+}
+
+static int
qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
{
struct fwnode_handle *led = NULL, *leds = NULL;
@@ -186,6 +223,7 @@ qca8k_parse_port_leds(struct qca8k_priv
port_led->cdev.max_brightness = 1;
port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking;
+ port_led->cdev.blink_set = qca8k_cled_blink_set;
init_data.default_label = ":port";
init_data.fwnode = led;
init_data.devname_mandatory = true;