Stijn Tintel e261c8b764 brcm2708-gpu-fw: add fw required for camera module ... To be able to use the camera module, start_x=1 has to be set in config.txt. This will cause the bootloader to load the GPU firmware that contain the extra video codecs. Install these firmware files. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>		2018-12-05 00:39:53 +02:00
..
adm5120	kernel: bump 3.18 to 3.18.123	2018-09-26 15:54:18 +02:00
adm8668	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
apm821xx	apm821xx: wndr4700: restore sd-card media detection	2018-11-26 12:05:47 +01:00
ar7	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
ar71xx	ath79: modify mtd partitions for Buffalo BHR-4GRV2	2018-11-26 12:28:17 +01:00
arc770	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
archs38	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
armvirt	kernel: bump 4.14 to 4.14.77	2018-10-19 10:01:57 +02:00
at91	kernel: enable memory compaction	2018-10-09 14:29:55 +02:00
ath25	kernel: bump 4.14 to 4.14.79	2018-11-05 16:00:00 +01:00
ath79	ath79: add support for Ubiquiti AirRouter	2018-12-03 07:58:56 +01:00
au1000	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
bcm53xx	bcm53xx: request Seama parser on DIR-885L directly	2018-11-22 10:13:56 +01:00
brcm47xx	kernel: bump 4.14 to 4.14.81	2018-11-14 16:27:43 +01:00
brcm63xx	kernel: bump 4.14 to 4.14.79	2018-11-05 16:00:00 +01:00
brcm2708	brcm2708-gpu-fw: add fw required for camera module	2018-12-05 00:39:53 +02:00
cns3xxx	kernel: bump 4.14 to 4.14.77	2018-10-19 10:01:57 +02:00
gemini	gemini: Fix up image generation	2018-10-20 16:13:39 +02:00
generic	kernel: add missing symbol	2018-12-04 22:45:08 +02:00
imx6	imx6: image: ventana: Add missing BOOT_SCRIPT variable	2018-11-25 19:23:03 +01:00
ipq40xx	kernel: bump 4.14 to 4.14.79	2018-11-05 16:00:00 +01:00
ipq806x	ipq806x: Add support for IPQ8064 AP161 board	2018-11-26 12:05:46 +01:00
ixp4xx	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
kirkwood	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
lantiq	lantiq: enable FXS ports on VR200v	2018-11-26 12:30:33 +01:00
layerscape	kernel: bump 4.9 to 4.9.137	2018-11-14 16:27:43 +01:00
malta	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
mcs814x	kernel: bump 3.18 to 3.18.119	2018-08-20 13:03:23 +02:00
mediatek	kernel: bump 4.14 to 4.14.79	2018-11-05 16:00:00 +01:00
mpc85xx	mpc85xx: workaround 4.14 cross compile issue	2018-10-20 16:24:29 +02:00
mvebu	kernel: bump 4.14 to 4.14.81	2018-11-14 16:27:43 +01:00
mxs	mxs: use generic sysinfo board detection	2018-11-28 23:37:29 +01:00
octeon	octeon: remove linux 4.9 support	2018-09-29 18:09:45 +02:00
octeontx	kernel: enable memory compaction	2018-10-09 14:29:55 +02:00
omap	kernel: bump 4.14 to 4.14.77	2018-10-19 10:01:57 +02:00
omap24xx	omap24xx: remove referece to not existing kmod-usb-musb-tusb6010	2018-01-15 13:13:34 +01:00
orion	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
oxnas	oxnas: remove superseded sysupgrade image check	2018-11-08 14:41:42 +01:00
pistachio	kernel: bump 4.14 to 4.14.79	2018-11-05 16:00:00 +01:00
ppc40x	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
ppc44x	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
ramips	ramips: fix Netgear EX3700/EX3800 wireless driver selection	2018-12-04 20:40:27 +01:00
rb532	rb532: drop 4.9 support	2018-11-26 09:34:09 +01:00
samsung	kernel: bump 4.14 to 4.14.77	2018-10-19 10:01:57 +02:00
sunxi	kernel: bump 4.14 to 4.14.77	2018-10-19 10:01:57 +02:00
uml	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
x86	x86: make sysupgrade.tgz reachable again	2018-12-03 07:38:20 +01:00
xburst	kernel: bump 3.18 to 3.18.119	2018-08-20 13:03:23 +02:00
zynq	kernel: bump 4.14 to 4.14.77	2018-10-19 10:01:57 +02:00
Makefile