mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
e1a55de7a7
The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with
two external antennas. It comes with a coaxial HomePNA port.
Hardware:
- SoC: Broadcom BCM6368
- CPU: dual core BMIPS4350 V3.1 @400Mhz
- RAM: 64 MB DDR
- Flash: 32 MB parallel NOR
- LAN switch: Broadcom BCM53115, 5x 1Gbit
- LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213
- Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
- USB: 1x 2.0
- Buttons: 2x, 1 reset
- LEDs: 7x
- UART: yes
The HPNA hardware probably needs a firmware to make the coaxial port work.
In the OEM firmware, it's apparently sent with an utility (inhpna) through
the ethernet port.
Installation via CFE web UI:
1. Connect the UART serial port.
2. Power on the router and press enter at the console prompt to stop the
bootloader.
4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware
5. Wait a few minutes for it to finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
119 lines
2.9 KiB
Makefile
119 lines
2.9 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
define Device/actiontec_r1000h
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := Actiontec
|
|
DEVICE_MODEL := R1000H
|
|
CHIP_ID := 6368
|
|
CFE_BOARD_ID := 96368VVW
|
|
BLOCKSIZE := 0x20000
|
|
FLASH_MB := 32
|
|
CFE_EXTRAS += --signature "$$(DEVICE_VENDOR)"
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += actiontec_r1000h
|
|
|
|
define Device/comtrend_vr-3025u
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := Comtrend
|
|
DEVICE_MODEL := VR-3025u
|
|
CHIP_ID := 6368
|
|
CFE_BOARD_ID := 96368M-1541N
|
|
BLOCKSIZE := 0x20000
|
|
FLASH_MB := 32
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-43222-sprom \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += comtrend_vr-3025u
|
|
|
|
define Device/comtrend_vr-3025un
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := Comtrend
|
|
DEVICE_MODEL := VR-3025un
|
|
CHIP_ID := 6368
|
|
CFE_BOARD_ID := 96368M-1341N
|
|
FLASH_MB := 8
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-43222-sprom \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += comtrend_vr-3025un
|
|
|
|
define Device/comtrend_wap-5813n
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := Comtrend
|
|
DEVICE_MODEL := WAP-5813n
|
|
CHIP_ID := 6368
|
|
SOC := bcm6369
|
|
CFE_BOARD_ID := 96369R-1231N
|
|
FLASH_MB := 8
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-4322-sprom \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += comtrend_wap-5813n
|
|
|
|
define Device/netgear_dgnd3700-v1
|
|
$(Device/bcm63xx-netgear)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := DGND3700
|
|
DEVICE_VARIANT := v1
|
|
CFE_BOARD_ID := 96368MVWG
|
|
CHIP_ID := 6368
|
|
BLOCKSIZE := 0x20000
|
|
NETGEAR_BOARD_ID := U12L144T01_NETGEAR_NEWLED
|
|
NETGEAR_REGION := 1
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += netgear_dgnd3700-v1
|
|
|
|
define Device/netgear_dgnd3800b
|
|
$(Device/bcm63xx-netgear)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := DGND3800B
|
|
CFE_BOARD_ID := 96368MVWG
|
|
CHIP_ID := 6368
|
|
BLOCKSIZE := 0x20000
|
|
NETGEAR_BOARD_ID := U12L144T11_NETGEAR_NEWLED
|
|
NETGEAR_REGION := 1
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += netgear_dgnd3800b
|
|
|
|
define Device/netgear_evg2000
|
|
$(Device/bcm63xx-netgear)
|
|
DEVICE_MODEL := EVG2000
|
|
CFE_BOARD_ID := 96369PVG
|
|
CHIP_ID := 6368
|
|
SOC := bcm6369
|
|
BLOCKSIZE := 0x20000
|
|
NETGEAR_BOARD_ID := U12H154T90_NETGEAR
|
|
NETGEAR_REGION := 1
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-4322-sprom \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += netgear_evg2000
|
|
|
|
define Device/observa_vh4032n
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := Observa
|
|
DEVICE_MODEL := VH4032N
|
|
IMAGES += sysupgrade.bin
|
|
CFE_BOARD_ID := 96368VVW
|
|
CHIP_ID := 6368
|
|
BLOCKSIZE := 0x20000
|
|
FLASH_MB := 32
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-43222-sprom \
|
|
kmod-leds-gpio
|
|
endef
|
|
TARGET_DEVICES += observa_vh4032n
|