mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
99 lines
3.3 KiB
Diff
99 lines
3.3 KiB
Diff
From 6bbb873c79b9bb0b3ca95fa4a4fe6cfd0ebe9d2c Mon Sep 17 00:00:00 2001
|
|
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Date: Fri, 4 Oct 2019 13:05:24 -0300
|
|
Subject: [PATCH] media: dt-bindings: media: i2c: Add IMX290 CMOS
|
|
sensor binding
|
|
|
|
Commit 8a97a4676f8b1badcd9cfbed2b081342847bb1b1 upstream.
|
|
|
|
Add devicetree binding for IMX290 CMOS image sensor. Let's also
|
|
add MAINTAINERS entry for the binding and driver.
|
|
|
|
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
---
|
|
.../devicetree/bindings/media/i2c/imx290.txt | 57 +++++++++++++++++++
|
|
MAINTAINERS | 8 +++
|
|
2 files changed, 65 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx290.txt
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/media/i2c/imx290.txt
|
|
@@ -0,0 +1,57 @@
|
|
+* Sony IMX290 1/2.8-Inch CMOS Image Sensor
|
|
+
|
|
+The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
|
|
+Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
|
|
+interfaces. The sensor output is available via CMOS logic parallel SDR output,
|
|
+Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
|
|
+default. No bindings have been defined for the other busses.
|
|
+
|
|
+Required Properties:
|
|
+- compatible: Should be "sony,imx290"
|
|
+- reg: I2C bus address of the device
|
|
+- clocks: Reference to the xclk clock.
|
|
+- clock-names: Should be "xclk".
|
|
+- clock-frequency: Frequency of the xclk clock in Hz.
|
|
+- vdddo-supply: Sensor digital IO regulator.
|
|
+- vdda-supply: Sensor analog regulator.
|
|
+- vddd-supply: Sensor digital core regulator.
|
|
+
|
|
+Optional Properties:
|
|
+- reset-gpios: Sensor reset GPIO
|
|
+
|
|
+The imx290 device node should contain one 'port' child node with
|
|
+an 'endpoint' subnode. For further reading on port node refer to
|
|
+Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
+
|
|
+Required Properties on endpoint:
|
|
+- data-lanes: check ../video-interfaces.txt
|
|
+- link-frequencies: check ../video-interfaces.txt
|
|
+- remote-endpoint: check ../video-interfaces.txt
|
|
+
|
|
+Example:
|
|
+ &i2c1 {
|
|
+ ...
|
|
+ imx290: camera-sensor@1a {
|
|
+ compatible = "sony,imx290";
|
|
+ reg = <0x1a>;
|
|
+
|
|
+ reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&camera_rear_default>;
|
|
+
|
|
+ clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
|
|
+ clock-names = "xclk";
|
|
+ clock-frequency = <37125000>;
|
|
+
|
|
+ vdddo-supply = <&camera_vdddo_1v8>;
|
|
+ vdda-supply = <&camera_vdda_2v8>;
|
|
+ vddd-supply = <&camera_vddd_1v5>;
|
|
+
|
|
+ port {
|
|
+ imx290_ep: endpoint {
|
|
+ data-lanes = <1 2 3 4>;
|
|
+ link-frequencies = /bits/ 64 <445500000>;
|
|
+ remote-endpoint = <&csiphy0_ep>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
--- a/MAINTAINERS
|
|
+++ b/MAINTAINERS
|
|
@@ -15200,6 +15200,14 @@ S: Maintained
|
|
F: drivers/media/i2c/imx274.c
|
|
F: Documentation/devicetree/bindings/media/i2c/imx274.txt
|
|
|
|
+SONY IMX290 SENSOR DRIVER
|
|
+M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
+L: linux-media@vger.kernel.org
|
|
+T: git git://linuxtv.org/media_tree.git
|
|
+S: Maintained
|
|
+F: drivers/media/i2c/imx290.c
|
|
+F: Documentation/devicetree/bindings/media/i2c/imx290.txt
|
|
+
|
|
SONY IMX319 SENSOR DRIVER
|
|
M: Bingbu Cao <bingbu.cao@intel.com>
|
|
L: linux-media@vger.kernel.org
|