Maxim Anisimov 6c45f3527f ramips: add support for Keenetic KN-3510 ... Keenetic KN-3510 is a 2.4/5 Ghz band 11ax access point Specification: - System-On-Chip: MT7621AT - CPU/Speed: 880 MHz - Flash-Chip: Macronix MX30LF1G28AD-TI - Flash size: 128 MiB - RAM: 256 MiB - 2x 10/100/1000 Mbps Ethernet - PoE, 802.3af/at - 4x internal antennas - UART (J1) header on PCB (115200 8n1) - WiFi: MT7915 2x2 2.4G 573.5Mbps + 2x2 5G 1201Mbps - 2x LED, 2x button, 1x mode switch Notes: - The device supports dual boot mode - The firmware partitions were concatinated into one Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-ramips-mt7621-keenetic_kn-3510-squashfs-factory.bin" to "KN-3510_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power led start blinking. 4. Router will download file from server, write it to flash and reboot Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15744 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2024-07-21 20:54:31 +02:00
..
preinit	ramips: get rid of downstream network device label patch	2024-05-31 13:26:54 +01:00
upgrade	ramips: add support for Keenetic KN-3510	2024-07-21 20:54:31 +02:00