TruongSinh Tran-Nguyen febc2b831f ipq40xx: add support for GL.iNet GL-B2200 ... This patch adds supports for the GL-B2200 router. Specifications: - SOC: Qualcomm IPQ4019 ARM Quad-Core - RAM: 512 MiB - Flash: 16 MiB NOR - SPI0 - EMMC: 8GB EMMC - ETH: Qualcomm QCA8075 - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11b/g/n 2x2 - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11n/ac W2 2x2 - WLAN3: Qualcomm Atheros QCA9886 5GHz 802.11n/ac W2 2x2 - INPUT: Reset, WPS - LED: Power, Internet - UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 - UART2: On board with BLE module - SPI1: On board socket for Zigbee module Update firmware instructions: Please update the firmware via U-Boot web UI (by default at 192.168.1.1, following instructions found at https://docs.gl-inet.com/en/3/troubleshooting/debrick/). Normal sysupgrade, either via CLI or LuCI, is not possible from stock firmware. Please do use the *gl-b2200-squashfs-emmc.img file, gunzipping the produced *gl-b2200-squashfs-emmc.img.gz one first. What's working: - WiFi 2G, 5G - WPA2/WPA3 Not tested: - Bluetooth LE/Zigbee Credits goes to the original authors of this patch. V1->V2: - updates *arm-boot-add-dts-files.patch correctly (sorry, my mistake) - add uboot-envtools support V2->V3: - Li Zhang updated official patch to fix wrong MAC address on wlan0 (PCI) interface V3->V4: - wire up sysupgrade Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [fix tab and trailing space, document what's working and what's not] Signed-off-by: TruongSinh Tran-Nguyen <i@truongsinh.pro> [rebase on top of master, address remaining comments] Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> [remove redundant check in platform.sh] Signed-off-by: Daniel Golle <daniel@makrotopia.org>		2021-12-02 20:43:07 +00:00
..
104-clk-fix-apss-cpu-overclocking.patch
105-ipq40xx-fix-sleep-clock.patch	ipq40xx: update 105-ipq40xx-fix-sleep-clock.patch	2021-11-27 23:56:29 +01:00
300-clk-qcom-ipq4019-add-ess-reset.patch
301-arm-compressed-add-appended-DTB-section.patch	ipq40xx: 5.10: refresh patches to apply	2021-09-25 19:28:54 +02:00
302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch	ipq40xx: 5.10: refresh patches to apply	2021-09-25 19:28:54 +02:00
400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch	ipq40xx: 5.10: refresh patches to apply	2021-09-25 19:28:54 +02:00
702-dts-ipq4019-add-PHY-switch-nodes.patch
703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch	ipq40xx: 5.10: refresh patches to apply	2021-09-25 19:28:54 +02:00
705-net-add-qualcomm-ar40xx-phy.patch	ipq40xx: 5.10: move AR40xx to MDIO drivers	2021-09-25 19:28:54 +02:00
706-dt-bindings-net-add-QCA807x-PHY.patch
707-net-phy-Add-Qualcom-QCA807x-driver.patch	kernel: 5.10: backport qca8k stability improvements	2021-10-24 16:56:17 +02:00
708-arm-dts-ipq4019-QCA807x-properties.patch
710-net-add-qualcomm-essedma-ethernet-driver.patch
711-dts-ipq4019-add-ethernet-essedma-node.patch
850-soc-add-qualcomm-syscon.patch	ipq40xx: 5.10: refresh patches to apply	2021-09-25 19:28:54 +02:00
900-dts-ipq4019-ap-dk01.1.patch
901-arm-boot-add-dts-files.patch	ipq40xx: add support for GL.iNet GL-B2200	2021-12-02 20:43:07 +00:00
902-dts-ipq4019-ap-dk04.1.patch
997-device_tree_cmdline.patch	ipq40xx: 5.10: refresh patches to apply	2021-09-25 19:28:54 +02:00
0001-v5.12-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch	ipq40xx: 5.10: replace patches with upstreamed versions	2021-09-25 19:28:54 +02:00
0002-v5.12-ARM-dts-qcom-ipq4019-add-more-labels.patch	ipq40xx: 5.10: replace patches with upstreamed versions	2021-09-25 19:28:54 +02:00
0003-v5.12-ARM-dts-qcom-ipq4019-add-SDHCI-VQMMC-LDO-node.patch	ipq40xx: 5.10: replace patches with upstreamed versions	2021-09-25 19:28:54 +02:00