openwrt/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch
Koen Vandeputte 6b4ba118ac kernel: bump 4.14 to 4.14.66
Refreshed all patches

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-22 13:47:13 +02:00

73 lines
2.3 KiB
Diff

--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -205,6 +205,7 @@ struct hw_bank {
* @in_lpm: if the core in low power mode
* @wakeup_int: if wakeup interrupt occur
* @rev: The revision number for controller
+ * @dp_always_pullup: keep dp always pullup at device mode
*/
struct ci_hdrc {
struct device *dev;
@@ -259,6 +260,7 @@ struct ci_hdrc {
bool in_lpm;
bool wakeup_int;
enum ci_revision rev;
+ bool dp_always_pullup;
};
static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -818,7 +818,7 @@ static inline void ci_role_destroy(struc
{
ci_hdrc_gadget_destroy(ci);
ci_hdrc_host_destroy(ci);
- if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET])
ci_hdrc_otg_destroy(ci);
}
@@ -923,6 +923,9 @@ static int ci_hdrc_probe(struct platform
CI_HDRC_SUPPORTS_RUNTIME_PM);
platform_set_drvdata(pdev, ci);
+ ci->dp_always_pullup = !!(ci->platdata->flags &
+ CI_HDRC_DP_ALWAYS_PULLUP);
+
ret = hw_device_init(ci, base);
if (ret < 0) {
dev_err(dev, "can't initialize hardware\n");
@@ -1004,7 +1007,7 @@ static int ci_hdrc_probe(struct platform
goto deinit_gadget;
}
- if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) {
ret = ci_hdrc_otg_init(ci);
if (ret) {
dev_err(dev, "init otg fails, ret = %d\n", ret);
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -131,8 +131,10 @@ enum ci_role ci_otg_role(struct ci_hdrc
void ci_handle_vbus_change(struct ci_hdrc *ci)
{
- if (!ci->is_otg)
+ if (ci->dp_always_pullup) {
+ usb_gadget_vbus_connect(&ci->gadget);
return;
+ }
if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active)
usb_gadget_vbus_connect(&ci->gadget);
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -60,6 +60,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
#define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */
#define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13)
+#define CI_HDRC_DP_ALWAYS_PULLUP BIT(14)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1