openwrt/target/linux/realtek/dts-5.10
Alexandru Gagniuc 4d1fc8916c realtek: EnGenius EWS2910P: add support for SFP ports
The SFP cages 9F and 10F share the same SCL line. Currently, there
isn't a good way to model this. Thus, only one SFP port can be fully
supported.

Cage 10F is fully supported with an I2C bus and sfp handle. Linux
automatically handles enabling or disabling the TX laser.

Cage 9F is only parially supported, without the sfp handle. The SDA
line is hogged as an input, so that it remains high. SCL transitions
sould not affect modules connected to this cage. The default value of
the tx-disable line is high (active). It is exported as a gpio, but
the laser is off by default. To enable the laser:

    echo 0 > /sys/class/gpio/sff-p9-tx-disable/value

Thus, both modules can be used for networking, but only 10F will be
able to detect and identify a plugged in SFP module.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2022-06-25 15:45:30 +02:00
..
rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi realtek: add support for Panasonic Switch-M8eG PN28080K 2022-03-13 19:54:57 +01:00
rtl838x.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl839x.dtsi realtek: fix node addresses for RTL839x 2022-02-20 16:23:55 +00:00
rtl930x.dtsi realtek: use DT provided address for timers 2022-02-20 16:23:58 +00:00
rtl931x.dtsi realtek: consolidate bootargs again 2022-02-20 16:23:55 +00:00
rtl8380_engenius_ews2910p.dts realtek: EnGenius EWS2910P: add support for SFP ports 2022-06-25 15:45:30 +02:00
rtl8380_netgear_gigabit_1xx.dtsi realtek: make Netgear GS1xx u-boot env partition writable 2022-06-22 17:51:02 +02:00
rtl8380_netgear_gigabit_3xx.dtsi realtek: make "u-boot-env" partition writable for Netgear 3xx series 2022-06-22 17:52:30 +02:00
rtl8380_netgear_gigabit.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8380_netgear_gs108t-v3.dts realtek: add support for power LED on Netgear GS108Tv3 2022-06-19 10:58:40 +02:00
rtl8380_netgear_gs110tpp-v1.dts realtek: netgear-gs110tpp: Add system LEDs 2021-12-27 13:51:41 +01:00
rtl8380_netgear_gs308t-v1.dts realtek: add support for power LED on Netgear GS308Tv1 2022-06-18 09:21:50 +02:00
rtl8380_netgear_gs310tp-v1.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_panasonic_m8eg-pn28080k.dts realtek: add support for Panasonic Switch-M8eG PN28080K 2022-03-13 19:54:57 +01:00
rtl8380_zyxel_gs1900-8.dts realtek: copy dts directory for Kernel 5.10 2021-09-26 00:32:17 +02:00
rtl8380_zyxel_gs1900-8hp-v1.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-8hp-v2.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-10hp.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_allnet_all-sg8208m.dts realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_d-link_dgs-1210-10p.dts realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_d-link_dgs-1210-16.dts realtek: copy dts directory for Kernel 5.10 2021-09-26 00:32:17 +02:00
rtl8382_d-link_dgs-1210-20.dts realtek: add support for D-Link DGS-1210-20 2022-06-19 08:36:21 +02:00
rtl8382_d-link_dgs-1210-28.dts realtek: add gpio-restart for D-Link DGS-1210-28 2022-06-07 17:11:28 +02:00
rtl8382_d-link_dgs-1210.dtsi realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_inaba_aml2-17gp.dts realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_iodata_bsh-g24mb.dts realtek: add support for I-O DATA BSH-G24MB 2022-03-07 21:44:53 +01:00
rtl8382_zyxel_gs1900-16.dts realtek: add support for ZyXEL GS1900-16 2022-05-07 17:23:45 +02:00
rtl8382_zyxel_gs1900-24-v1.dts realtek: add ZyXEL GS1900-24 v1 support 2022-03-13 19:24:13 +01:00
rtl8382_zyxel_gs1900-24e.dts realtek: add support for ZyXEL GS1900-24E 2022-06-06 10:30:50 +02:00
rtl8382_zyxel_gs1900-24hp-v1.dts realtek: add ZyXEL GS1900-24HP v1 support 2022-04-16 17:26:56 +02:00
rtl8382_zyxel_gs1900-24hp-v2.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8393_zyxel_gs1900-48.dts realtek: ZyXEL GS1900-48: fix system LED polarity 2022-02-20 16:23:55 +00:00
rtl9302_zyxel_xgs1250-12.dts realtek: consolidate bootargs again 2022-02-20 16:23:55 +00:00