Chukun Pan 31d9ecee9d ramips: add support for JCG Q20 ... JCG Q20 is an AX 1800M router. Hardware specs: SoC: MediaTek MT7621AT Flash: Winbond W29N01HV 128 MiB RAM: Winbond W632GU6NB-11 256 MiB WiFi: MT7915 2.4/5 GHz 2T2R Ethernet: 10/100/1000 Mbps x3 LED: Status (red / blue) Button: Reset, WPS Power: DC 12V,1A Flash instructions: Upload factory.bin in stock firmware's upgrade page, do not preserve settings. MAC addresses map: 0x00004 *:3e wlan2g/wlan5g 0x3fff4 *:3c lan/label 0x3fffa *:3c wan Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: maurerr <mariusd84@gmail.com>		2021-09-01 08:08:09 +00:00
..
base-files/etc	ramips: remove model name from LED labels	2021-09-01 08:07:03 +00:00
dts	ramips: add support for JCG Q20	2021-09-01 08:08:09 +00:00
files/drivers	ramips: mt7530 swconfig: fix race condition in register access	2021-09-01 08:07:59 +00:00
image	ramips: add support for JCG Q20	2021-09-01 08:08:09 +00:00
mt76x8	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
mt7620	ramips: fix mac addresses of Youku YK1	2021-09-01 08:08:05 +00:00
mt7621	ramips: add support for JCG Q20	2021-09-01 08:08:09 +00:00
patches-5.4	kernel: bump 5.4 to 5.4.119	2021-09-01 08:08:07 +00:00
patches-5.10	kernel: bump 5.10 to 5.10.37	2021-09-01 08:08:05 +00:00
rt288x	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
rt305x	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
rt3883	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
Makefile	ramips: 5.10: port and refresh patches, ralink drv	2021-09-01 08:07:46 +00:00
modules.mk	ramips: rename mtk-hsdma to hsdma-mt7621	2021-09-01 08:07:45 +00:00