openwrt/target/linux/ath79/dts/qca9563_tplink_eap245-v1.dts
Rosen Penev b2f1c6ed52 ath79: qca: remove mac-address-increment
nvmem-layout allows removal

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 17:14:04 -08:00

85 lines
1.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9563_tplink_eap2x5-1port.dtsi"
/ {
compatible = "tplink,eap245-v1", "qca,qca9563";
model = "TP-Link EAP245 v1";
aliases {
led-boot = &led_status_green;
led-failsafe = &led_status_amber;
led-running = &led_status_green;
led-upgrade = &led_status_amber;
};
leds {
compatible = "gpio-leds";
led_status_green: status_green {
label = "green:status";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_amber: status_amber {
label = "amber:status";
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
led_status_red: status_red {
label = "red:status";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
gpio-export {
compatible = "gpio-export";
led_enable {
gpio-export,name = "leds:enable";
gpio-export,output = <1>;
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
};
};
&art {
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
compatible = "mac-base";
reg = <0x8 0x6>;
#nvmem-cell-cells = <1>;
};
calibration_ath10k: calibration@5000 {
reg = <0x5000 0x844>;
};
};
};
&eth0 {
phy-handle = <&phy4>;
phy-mode = "sgmii";
};
&mdio0 {
phy4: ethernet-phy@4 {
reg = <4>;
reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
&pcie {
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
nvmem-cells = <&macaddr_info_8 1>, <&calibration_ath10k>;
nvmem-cell-names = "mac-address", "calibration";
};
};