openwrt/target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts
Rosen Penev e816591e22 ath79: qca: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 17:14:04 -08:00

189 lines
3.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "TP-Link RE350K v1";
compatible = "tplink,re350k-v1", "qca,qca9558";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
mdio-gpio0 = &mdio2;
};
keys {
compatible = "gpio-keys";
app-config {
label = "app-config";
linux,code = <BTN_0>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
led {
label = "led";
linux,code = <BTN_1>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "green:power";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g_green {
label = "green:wlan2g";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan2g_red {
label = "red:wlan2g";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
wlan5g_green {
label = "green:wlan5g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g_red {
label = "red:wlan5g";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
};
mdio2: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>,
<&gpio 18 GPIO_ACTIVE_HIGH>;
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii-rxid";
eee-broken-100tx;
eee-broken-1000t;
};
};
};
&eth0 {
status = "okay";
phy-handle = <&phy4>;
pll-data = <0x9e000000 0x80000101 0x80001313>;
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
gmac-config {
device = <&gmac>;
rxdv-delay = <2>;
rxd-delay = <2>;
txen-delay = <0>;
txd-delay = <0>;
rgmii-enabled = <1>;
};
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0xd70000>;
};
partition@d90000 {
label = "partition-table";
reg = <0xd90000 0x010000>;
read-only;
};
info: partition@da0000 {
label = "info";
reg = <0xda0000 0x020000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
reg = <0x8 0x6>;
};
};
};
partition@dc0000 {
label = "config";
reg = <0xdc0000 0x230000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};