openwrt/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch
Koen Vandeputte e2aa0c3f8b kernel: bump 4.14 to 4.14.41
Refreshed all patches

Dropped upstreamed patches:
522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch
523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch
525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch
527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch

updated patches:
524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch

Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718

Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-05-18 09:10:46 +02:00

55 lines
1.7 KiB
Diff

From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Thu, 23 Jun 2016 20:28:20 +0200
Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
uPD720202
The APM82181 does not support MSI-X. When probed, it will
produce a noisy warning.
---
drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 362 insertions(+)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -202,7 +202,7 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
pdev->device == 0x0015)
- xhci->quirks |= XHCI_RESET_ON_RESUME;
+ xhci->quirks |= XHCI_RESET_ON_RESUME | XHCI_FORCE_MSI;
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -357,10 +357,14 @@ static int xhci_try_enable_msi(struct us
free_irq(hcd->irq, hcd);
hcd->irq = 0;
- ret = xhci_setup_msix(xhci);
- if (ret)
- /* fall back to msi*/
+ if (xhci->quirks & XHCI_FORCE_MSI) {
ret = xhci_setup_msi(xhci);
+ } else {
+ ret = xhci_setup_msix(xhci);
+ if (ret)
+ /* fall back to msi*/
+ ret = xhci_setup_msi(xhci);
+ }
if (!ret) {
hcd->msi_enabled = 1;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1850,6 +1850,7 @@ struct xhci_hcd {
/* support xHCI 0.96 spec USB2 software LPM */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
+#define XHCI_FORCE_MSI (1 << 24)
unsigned hw_lpm_support:1;
/* cached usb2 extened protocol capabilites */
u32 *ext_caps;