openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 07:46:48 +00:00

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.

Go to file

Gabor Juhos e17a3ffbbd ramips: extract eeprom for the built-in wlan module on the RT-N56U SVN-Revision: 30604		2012-02-16 20:06:22 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure	2012-02-13 15:31:28 +00:00
package	iwinfo: fix detection of Bullet M5, the PCI ID was wrong	2012-02-16 17:58:33 +00:00
scripts	env: colorize git output	2012-02-16 19:24:34 +00:00
target	ramips: extract eeprom for the built-in wlan module on the RT-N56U	2012-02-16 20:06:22 +00:00
toolchain	gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary	2012-02-12 20:25:47 +00:00
tools	Support booting the Speedport W502V using BRN-BOOT.	2012-02-14 17:48:04 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	2012-01-01 15:11:11 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	build: add -Wno-error=unused-but-set-variable to cflags for gcc 4.6 and newer to avoid stupid -Werror related package breakage	2012-02-15 19:19:12 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org