openwrt/package/kernel/lantiq/ltq-vdsl/Makefile
Jan Hoffmann 9754b6ba6f ltq-vdsl/ltq-vdsl-app: clean up configure args
The userspace application now uses the model=full option to match the
configuration of the kernel module. The source no longer contains SOAP
support, which was the primary reason to build only typical instead
of full before.

This makes several CLI commands, which were already supported in the
kernel module, available in the userspace application. For example, this
includes bbsg which allows to get information about VDSL2 bands.

Some previously applied build options were redundant. Disabling ADSL MIB
support is unnecessary, as it only applies to Danube. ADSL LED support
is no longer included in the source. ReTx counters are already included
with model type full.

This increases the size of the userspace application by approximately
15 kB (uncompressed). The kernel module does not change at all.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2021-08-21 15:59:39 +02:00

77 lines
2.1 KiB
Makefile

# Copyright (C) 2012 OpenWrt.org
# Copyright (C) 2015-2016 Lantiq Beteiligungs GmbH & Co KG.
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=ltq-vdsl-vr9
PKG_VERSION:=4.17.18.6
PKG_RELEASE:=5
PKG_BASE_NAME:=drv_dsl_cpe_api
PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BASE_NAME)-$(PKG_VERSION)
PKG_SOURCE_URL:=@OPENWRT
PKG_HASH:=b4966a60653acc49254b168c6cc9c49eb36c54548e763617788aa4f252a29f21
PKG_LICENSE:=GPL-2.0 BSD-2-Clause
PKG_LICENSE_FILES:=LICENSE
PKG_FIXUP:=autoreconf
PKG_MAINTAINER:=John Crispin <john@phrozen.org>
include $(INCLUDE_DIR)/package.mk
define KernelPackage/ltq-vdsl-vr9
TITLE:=vdsl driver
SECTION:=sys
SUBMENU:=Network Devices
DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9-mei
FILES:=$(PKG_BUILD_DIR)/src/drv_dsl_cpe_api.ko
AUTOLOAD:=$(call AutoLoad,51,drv_dsl_cpe_api)
endef
define Package/ltq-vdsl-vr9/description
This package contains the Lantiq DSL CPE API driver.
Supported Devices:
- VRX200 Family
endef
MAKE_FLAGS += \
$(KERNEL_MAKE_FLAGS) \
SHELL="$(BASH)"
CONFIGURE_ARGS += --enable-kernel-include="$(LINUX_DIR)/include" \
--with-max-device="1" \
--with-lines-per-device="1" \
--with-channels-per-line="1" \
--enable-vrx \
--enable-vrx-device=vr9 \
--enable-ifxos \
--enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
--enable-driver-include="-I$(STAGING_DIR)/usr/include/vdsl" \
--enable-add-drv-cflags="-DMODULE -DINCLUDE_DSL_ATM_PTM_INTERFACE_SUPPORT" \
--enable-linux-26 \
--enable-kernelbuild="$(LINUX_DIR)" \
--enable-debug-prints=no
ARCH=mips
CONFIGURE_ARGS += \
--enable-model=full \
--enable-dsl-ceoc=no
#CONFIGURE_ARGS += --enable-model=lite
#CONFIGURE_ARGS += --enable-model=footprint
#CONFIGURE_ARGS += --enable-model=typical
#CONFIGURE_ARGS += --enable-model=debug
define Build/InstallDev
$(INSTALL_DIR) $(1)/usr/include/drv_vdsl_cpe_api
$(CP) $(PKG_BUILD_DIR)/src/include/drv_dsl_cpe*.h $(1)/usr/include/drv_vdsl_cpe_api/
endef
$(eval $(call KernelPackage,ltq-vdsl-vr9))