openwrt/package/boot/uboot-envtools/files/ramips
Mikhail Zhilkin bd783fd60a ramips: add support for Beeline SmartBox GIGA
Beeline SmartBox GIGA is a wireless WiFi 5 router manufactured by
Sercomm company.

Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB, Nanya NT5CC128M16JR-EK
Flash: 128 MiB, Macronix MX30LF1G18AC
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7613BE): a/n/ac, 2x2
Ethernet: 3 ports - 2xGbE (WAN, LAN1), 1xFE (LAN2)
USB ports: 1xUSB3.0
Button: 1 button (Reset/WPS)
PCB ID: DBE00B-1.6MM
LEDs: 1 RGB LED
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot

Installation
-----------------
1. Downgrade stock (Beeline) firmware to v.1.0.02;
2. Give factory OpenWrt image a shorter name, e.g. 1001.img;
3. Upload and update the firmware via the original web interface.

Remark: You might need make the 3rd step twice if your running firmware
is booted from the Slot 1 (Sercomm0 bootflag). The stock firmware
reverses the bootflag (Sercomm0 / Sercomm1) on each firmware update.

Revert to stock
---------------
1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot:
      printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
2. Optional: Update with any stock (Beeline) firmware if you want to
   overwrite OpenWrt in Slot 0 completely.

MAC Addresses
-------------
+-----+-----------+---------+
| use | address   | example |
+-----+-----------+---------+
| LAN | label     | *:16    |
| WAN | label + 1 | *:17    |
| 2g  | label + 4 | *:1a    |
| 5g  | label + 5 | *:1b    |
+-----+-----------+---------+
The label MAC address was found in Factory 0x21000

Notes
-----
1. The following scripts are required for the build:
      sercomm-crypto.py - already exists in OpenWrt
      sercomm-partition-tag.py - already exists in OpenWrt
      sercomm-payload.py - already exists in OpenWrt
      sercomm-pid.py - new, the part of this pull request
      sercomm-kernel-header.py - new, the part of this pull request
2. This device (same as other Sercomm S2,S3-based devices) requires
   special LZMA and LOADADDR settings for successful boot:
      LZMA_TEXT_START=0x82800000
      KERNEL_LOADADDR=0x81001000
      LOADADDR=0x80001000
3. This device (same as several other Sercomm-based devices - Beeline,
   Netgear, Etisalat, Rostelecom) has partition map (mtd1) containing
   real partition offsets, which may differ from device to device
   depending on the number and location of bad blocks on NAND.
   "fixed-partitions" is used if the partition map is not found or
   corrupted. This behavour (it's the same as on stock firmware) is
   provided by MTD_SERCOMM_PARTS module.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
2022-07-03 20:25:38 +02:00

91 lines
2.0 KiB
Plaintext

#
# Copyright (C) 2011-2012 OpenWrt.org
#
[ -e /etc/config/ubootenv ] && exit 0
touch /etc/config/ubootenv
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(board_name)
case "$board" in
alfa-network,ac1200rm|\
alfa-network,awusfree1|\
alfa-network,quad-e4g|\
alfa-network,r36m-e4g|\
alfa-network,tube-e4g|\
engenius,esr600h|\
sitecom,wlr-4100-v1-002)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000"
;;
allnet,all0256n-4m|\
allnet,all0256n-8m|\
allnet,all5002|\
yuncore,ax820)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
;;
ampedwireless,ally-00x19k|\
ampedwireless,ally-r1900k)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4"
;;
beeline,smartbox-giga)
ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
;;
buffalo,wsr-1166dhp|\
buffalo,wsr-600dhp|\
mediatek,linkit-smart-7688|\
samknows,whitebox-v8|\
xiaomi,mi-router-3g-v2|\
xiaomi,mi-router-4a-gigabit|\
xiaomi,mi-router-4c|\
xiaomi,miwifi-3c|\
xiaomi,miwifi-nano|\
zbtlink,zbt-wg2626|\
zte,mf283plus)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
;;
hootoo,ht-tm05|\
ravpower,rp-wd03)
idx="$(find_mtd_index u-boot-env)"
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x4000" "0x1000" "0x1000"
;;
jcg,q20)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
;;
beeline,smartbox-flash|\
linksys,ea6350-v4|\
linksys,ea7300-v1|\
linksys,ea7300-v2|\
linksys,ea7500-v2|\
linksys,ea8100-v1|\
linksys,ea8100-v2|\
mts,wg430223|\
xiaomi,mi-router-3g|\
xiaomi,mi-router-3-pro|\
xiaomi,mi-router-4|\
xiaomi,mi-router-ac2100|\
xiaomi,redmi-router-ac2100)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
;;
zyxel,nr7101)
idx="$(find_mtd_index Config)"
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x1000" "0x80000"
;;
bolt,arion|\
xiaomi,mi-router-cr6606|\
xiaomi,mi-router-cr6608|\
xiaomi,mi-router-cr6609)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
;;
esac
config_load ubootenv
config_foreach ubootenv_add_app_config ubootenv
exit 0