Nick McKinney e0a574d4b7 ramips: add support for Linksys EA6350 v4 ... Specifications: - SoC: MT7621DAT (880MHz, 2 Cores) - RAM: 128 MB - Flash: 128 MB NAND - Ethernet: 5x 1GiE MT7530 - WiFi: MT7603/MT7613 - USB: 1x USB 3.0 This is another MT7621 device, very similar to other Linksys EA7300 series devices. Installation: Upload the generated factory.bin image via the stock web firmware updater. Reverting to factory firmware: Like other EA7300 devices, this device has an A/B router configuration to prevent bricking. Hard-resetting this device three (3) times will put the device in failsafe (default) mode. At this point, flash the OEM image to itself and reboot. This puts the router back into the 'B' image and allows for a firmware upgrade. Troubleshooting: If the firmware will not boot, first restore the factory as described above. This will then allow the factory.bin update to be applied properly. Signed-off-by: Nick McKinney <nick@ndmckinney.net>		2022-01-08 00:49:59 +01:00
..
base-files	ramips: add support for Linksys EA6350 v4	2022-01-08 00:49:59 +01:00
config-5.10	kernel: 5.10: consolidate mac80211 crypto options	2021-12-17 16:16:34 +01:00
target.mk	mt7621: mikrotik: use vmlinuz (zBoot ELF)	2020-10-29 21:35:03 +08:00