mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
011f2c26f1
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
144 lines
5.1 KiB
Diff
144 lines
5.1 KiB
Diff
From 4f4509e88313b05862de58f529712bc20a164871 Mon Sep 17 00:00:00 2001
|
|
From: Michael Heimpold <mhei@heimpold.de>
|
|
Date: Thu, 28 Apr 2016 22:06:15 +0200
|
|
Subject: [PATCH] net: ethernet: enc28j60: add device tree support
|
|
|
|
(Upstream commit 2dd355a007e44960ec049c75920ddb6778fec9ee)
|
|
|
|
The following patch adds the required match table for device tree support
|
|
(and while at, fix the indent). It's also possible to specify the
|
|
MAC address in the DT blob.
|
|
|
|
Also add the corresponding binding documentation file.
|
|
|
|
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
.../devicetree/bindings/net/microchip,enc28j60.txt | 59 ++++++++++++++++++++++
|
|
drivers/net/ethernet/microchip/enc28j60.c | 21 +++++---
|
|
2 files changed, 73 insertions(+), 7 deletions(-)
|
|
create mode 100644 Documentation/devicetree/bindings/net/microchip,enc28j60.txt
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
|
|
@@ -0,0 +1,59 @@
|
|
+* Microchip ENC28J60
|
|
+
|
|
+This is a standalone 10 MBit ethernet controller with SPI interface.
|
|
+
|
|
+For each device connected to a SPI bus, define a child node within
|
|
+the SPI master node.
|
|
+
|
|
+Required properties:
|
|
+- compatible: Should be "microchip,enc28j60"
|
|
+- reg: Specify the SPI chip select the ENC28J60 is wired to
|
|
+- interrupt-parent: Specify the phandle of the source interrupt, see interrupt
|
|
+ binding documentation for details. Usually this is the GPIO bank
|
|
+ the interrupt line is wired to.
|
|
+- interrupts: Specify the interrupt index within the interrupt controller (referred
|
|
+ to above in interrupt-parent) and interrupt type. The ENC28J60 natively
|
|
+ generates falling edge interrupts, however, additional board logic
|
|
+ might invert the signal.
|
|
+- pinctrl-names: List of assigned state names, see pinctrl binding documentation.
|
|
+- pinctrl-0: List of phandles to configure the GPIO pin used as interrupt line,
|
|
+ see also generic and your platform specific pinctrl binding
|
|
+ documentation.
|
|
+
|
|
+Optional properties:
|
|
+- spi-max-frequency: Maximum frequency of the SPI bus when accessing the ENC28J60.
|
|
+ According to the ENC28J80 datasheet, the chip allows a maximum of 20 MHz, however,
|
|
+ board designs may need to limit this value.
|
|
+- local-mac-address: See ethernet.txt in the same directory.
|
|
+
|
|
+
|
|
+Example (for NXP i.MX28 with pin control stuff for GPIO irq):
|
|
+
|
|
+ ssp2: ssp@80014000 {
|
|
+ compatible = "fsl,imx28-spi";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>;
|
|
+ status = "okay";
|
|
+
|
|
+ enc28j60: ethernet@0 {
|
|
+ compatible = "microchip,enc28j60";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&enc28j60_pins>;
|
|
+ reg = <0>;
|
|
+ interrupt-parent = <&gpio3>;
|
|
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
+ spi-max-frequency = <12000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pinctrl@80018000 {
|
|
+ enc28j60_pins: enc28j60_pins@0 {
|
|
+ reg = <0>;
|
|
+ fsl,pinmux-ids = <
|
|
+ MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */
|
|
+ >;
|
|
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
|
|
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
|
+ fsl,pull-up = <MXS_PULL_DISABLE>;
|
|
+ };
|
|
+ };
|
|
--- a/drivers/net/ethernet/microchip/enc28j60.c
|
|
+++ b/drivers/net/ethernet/microchip/enc28j60.c
|
|
@@ -28,11 +28,12 @@
|
|
#include <linux/skbuff.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spi/spi.h>
|
|
+#include <linux/of_net.h>
|
|
|
|
#include "enc28j60_hw.h"
|
|
|
|
#define DRV_NAME "enc28j60"
|
|
-#define DRV_VERSION "1.01"
|
|
+#define DRV_VERSION "1.02"
|
|
|
|
#define SPI_OPLEN 1
|
|
|
|
@@ -1544,6 +1545,7 @@ static int enc28j60_probe(struct spi_dev
|
|
{
|
|
struct net_device *dev;
|
|
struct enc28j60_net *priv;
|
|
+ const void *macaddr;
|
|
int ret = 0;
|
|
|
|
if (netif_msg_drv(&debug))
|
|
@@ -1575,7 +1577,12 @@ static int enc28j60_probe(struct spi_dev
|
|
ret = -EIO;
|
|
goto error_irq;
|
|
}
|
|
- eth_hw_addr_random(dev);
|
|
+
|
|
+ macaddr = of_get_mac_address(spi->dev.of_node);
|
|
+ if (macaddr)
|
|
+ ether_addr_copy(dev->dev_addr, macaddr);
|
|
+ else
|
|
+ eth_hw_addr_random(dev);
|
|
enc28j60_set_hw_macaddr(dev);
|
|
|
|
/* Board setup must set the relevant edge trigger type;
|
|
@@ -1630,16 +1637,16 @@ static int enc28j60_remove(struct spi_de
|
|
return 0;
|
|
}
|
|
|
|
-static const struct of_device_id enc28j60_of_match[] = {
|
|
- { .compatible = "microchip,enc28j60", },
|
|
+static const struct of_device_id enc28j60_dt_ids[] = {
|
|
+ { .compatible = "microchip,enc28j60" },
|
|
{ /* sentinel */ }
|
|
};
|
|
-MODULE_DEVICE_TABLE(of, enc28j60_of_match);
|
|
+MODULE_DEVICE_TABLE(of, enc28j60_dt_ids);
|
|
|
|
static struct spi_driver enc28j60_driver = {
|
|
.driver = {
|
|
- .name = DRV_NAME,
|
|
- .of_match_table = enc28j60_of_match,
|
|
+ .name = DRV_NAME,
|
|
+ .of_match_table = enc28j60_dt_ids,
|
|
},
|
|
.probe = enc28j60_probe,
|
|
.remove = enc28j60_remove,
|