mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
dfa0a38d1f
**What's new**
* Bring support for the Bananapi BPi-R64 to the level desirable for
a nice hackable routerboard.
* Use ARM Trusted Firmware A from source. (goodbye binary preloader)
* Use Das U-Boot from source. (see previous commit)
* Assemble SD-card image using OpenWrt image-commands.
(no gen_sd_cruz_foo.sh added, this is not Raspbian)
* Updated kernel options to support root filesystem.
* Updated DTS to match OpenWrt LAN ports, known LEDs, buttons, ...
* Detect root device, handle sysupgrade, config restore, ...
* Wire up (known) LEDs and buttons in OpenWrt-fashion.
* Build one set of images from SD-card and eMMC.
* Hopefully provide a good example of how things can be done right
from scratch.
**Installation and images**
* Have an empty SD-card at hand
* Write stuff to the card, as root (card device is /dev/mmcblkX)
- write header, gpt, bl2, atf, u-boot and recovery kernel:
`cat *bpi-r64-boot-sdcard.img *bpi-r64-initramfs-recovery.fit > /dev/mmcblkX`
- rescan partitions:
`blockdev --rereadpt /dev/mmcblkX`
- write main system to production partition:
`cat *bpi-r64-squashfs-sysupgrade.fit > /dev/mmcblkXp5`
* Installation to eMMC works using SD-card bootloader via TFTP
When running OpenWrt of SD-card, issue this to trigger installation
to eMMC:
`fw_setenv bootcmd run emmc_init`
Be prepared to serve the content of bin/targets/mediatek/mt7622 on
TFTP server address 192.168.1.254.
**What's missing**
* The red LED is always on, probably a hardware bug.
* AHCI (probably needs DTS changes)
* Ship SD-card image ready with every needed for eMMC install.
* The eMMC has a second, currently unused boot partition. This would
be ideal to store the WiFi EEPROM and Ethernet MAC address(es).
@sinovoip ideas?
Thanks to Thomas Hühn @thuehn for providing the hardware!
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
30 lines
504 B
Diff
30 lines
504 B
Diff
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
|
|
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
|
|
@@ -160,22 +160,22 @@
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
- label = "lan0";
|
|
+ label = "lan1";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
- label = "lan1";
|
|
+ label = "lan2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
- label = "lan2";
|
|
+ label = "lan3";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
- label = "lan3";
|
|
+ label = "lan4";
|
|
};
|
|
|
|
port@6 {
|