mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
df8e4b6c2e
The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. It comes with a horizontal stand black shiny casing. Newer Bright Box 1 model stands vertically, and comes with a totally different board inside, not compatible with this firmware. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 8 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard) - USB: 1x 2.0 - ADSL: yes, unsupported - Buttons: 2x - LEDs: 9x, power LED is hardware controlled - UART: yes Installation in two steps, new CFE bootloader and firmware: Install new CFE: 1. Power off the router and press the RESET button 2. Power on the router and wait some seconds 3. Release the RESET button 3. Browse to http://192.168.1.1, this web interface will offer both firmware (“Software”) upgrade and bootloader upgrade; be sure to use the bootloader section of the upload form. 4. Upload the new CFE (availabe at the wiki page) 5. Wait about a minute for flashing to finish and reboot into the new bootloader. Install OpenWrt via new CFE web UI: 1. After installing the new CFE, visit http://192.168.1.1 2. Upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
72 lines
1.7 KiB
Makefile
72 lines
1.7 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
define Device/arcadyan_ar7516
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := Arcadyan
|
|
DEVICE_MODEL := AR7516
|
|
CHIP_ID := 6328
|
|
CFE_BOARD_ID := AR7516AAW
|
|
FLASH_MB := 8
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-43227-sprom \
|
|
kmod-leds-bcm6328
|
|
endef
|
|
TARGET_DEVICES += arcadyan_ar7516
|
|
|
|
define Device/comtrend_ar-5381u
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := Comtrend
|
|
DEVICE_MODEL := AR-5381u
|
|
CHIP_ID := 6328
|
|
CFE_BOARD_ID := 96328A-1241N
|
|
FLASH_MB := 16
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-43225-sprom \
|
|
kmod-leds-bcm6328
|
|
endef
|
|
TARGET_DEVICES += comtrend_ar-5381u
|
|
|
|
define Device/comtrend_ar-5387un
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := Comtrend
|
|
DEVICE_MODEL := AR-5387un
|
|
CHIP_ID := 6328
|
|
CFE_BOARD_ID := 96328A-1441N1
|
|
FLASH_MB := 16
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-43225-sprom \
|
|
kmod-leds-bcm6328
|
|
endef
|
|
TARGET_DEVICES += comtrend_ar-5387un
|
|
|
|
define Device/nucom_r5010unv2
|
|
$(Device/bcm63xx-cfe)
|
|
DEVICE_VENDOR := NuCom
|
|
DEVICE_MODEL := R5010UNv2
|
|
CHIP_ID := 6328
|
|
CFE_BOARD_ID := 96328ang
|
|
FLASH_MB := 16
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-43217-sprom \
|
|
kmod-leds-bcm6328
|
|
endef
|
|
TARGET_DEVICES += nucom_r5010unv2
|
|
|
|
define Device/sercomm_ad1018
|
|
$(Device/sercomm-nand)
|
|
DEVICE_VENDOR := Sercomm
|
|
DEVICE_MODEL := AD1018
|
|
CHIP_ID := 6328
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
|
$(B43_PACKAGES) broadcom-43217-sprom \
|
|
kmod-leds-bcm6328
|
|
SERCOMM_FSVER := 1001
|
|
SERCOMM_HWVER := 1415153
|
|
SERCOMM_SWVER := 3013
|
|
endef
|
|
TARGET_DEVICES += sercomm_ad1018
|