mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-16 23:39:29 +00:00
df8ca9a5c4
So far fixtrx was calculating checksum over amount of data matching partition erase size. It was mostly a workaround of checksum problem after changing anything in initial TRX content (e.g. formatting JFFS2). Its main purpose was to make bootloader accept modified TRX. This didn't provide much protection of flash data against corruption. This new option lets caller request calculating checksum over a bigger amount of data. It may be used e.g. to include whole kernel data for checksum and hopefully make bootloader go info failsafe mode if something goes wrong. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The LEDE system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org