openwrt/target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch

From patchwork Tue Dec 10 08:14:38 2019
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Landen Chao <landen.chao@mediatek.com>
X-Patchwork-Id: 1206963
X-Patchwork-Delegate: davem@davemloft.net
Return-Path: <netdev-owner@vger.kernel.org>
X-Original-To: patchwork-incoming-netdev@ozlabs.org
Delivered-To: patchwork-incoming-netdev@ozlabs.org
Authentication-Results: ozlabs.org; spf=none (no SPF record)
 smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67;
 helo=vger.kernel.org;
 envelope-from=netdev-owner@vger.kernel.org;
 receiver=<UNKNOWN>)
Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none)
 header.from=mediatek.com
Authentication-Results: ozlabs.org; dkim=pass (1024-bit key;
 unprotected) header.d=mediatek.com header.i=@mediatek.com
 header.b="UJ5NATux"; dkim-atps=neutral
Received: from vger.kernel.org (vger.kernel.org [209.132.180.67])
 by ozlabs.org (Postfix) with ESMTP id 47XCY92tBkz9sR7
 for <patchwork-incoming-netdev@ozlabs.org>;
 Tue, 10 Dec 2019 19:15:25 +1100 (AEDT)
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
 id S1727003AbfLJIO4 (ORCPT
 <rfc822;patchwork-incoming-netdev@ozlabs.org>);
 Tue, 10 Dec 2019 03:14:56 -0500
Received: from mailgw02.mediatek.com ([210.61.82.184]:45567 "EHLO
 mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by
 vger.kernel.org with ESMTP id S1726071AbfLJIOy (ORCPT
 <rfc822;netdev@vger.kernel.org>); Tue, 10 Dec 2019 03:14:54 -0500
X-UUID: a18674d7b33c423e9e67b7440f4771cf-20191210
DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
 d=mediatek.com; s=dk; 
 h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From;
 bh=c2C/fEHYw/8uqadmiP2m2xa2hsUpAd52urXVJTPlYck=; 
 b=UJ5NATuxMtqHln5i6BTpWiLnxGKgWvp4DpRsKVO2xdnz2cJaT4XL8F/T5fK3CTF4nAai0EKPAcqp+rr8eCLq7uURJv5e5h+ZIzKLSAB4zgnchXesQLo0uFS8vs5w2yp49j6bez1z3v/uN+1+Lpq0uYid9awCqzvbnovrooEysu4=;
X-UUID: a18674d7b33c423e9e67b7440f4771cf-20191210
Received: from mtkcas09.mediatek.inc [(172.21.101.178)] by
 mailgw02.mediatek.com (envelope-from <landen.chao@mediatek.com>)
 (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS)
 with ESMTP id 1965641267; Tue, 10 Dec 2019 16:14:46 +0800
Received: from mtkcas08.mediatek.inc (172.21.101.126) by
 mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server
 (TLS) id 15.0.1395.4; Tue, 10 Dec 2019 16:14:31 +0800
Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas08.mediatek.inc
 (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via
 Frontend Transport; Tue, 10 Dec 2019 16:14:26 +0800
From: Landen Chao <landen.chao@mediatek.com>
To: <andrew@lunn.ch>, <f.fainelli@gmail.com>,
 <vivien.didelot@savoirfairelinux.com>, <matthias.bgg@gmail.com>,
 <robh+dt@kernel.org>, <mark.rutland@arm.com>
CC: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
 <linux-kernel@vger.kernel.org>,
 <linux-mediatek@lists.infradead.org>, <davem@davemloft.net>,
 <sean.wang@mediatek.com>, <opensource@vdorst.com>,
 <frank-w@public-files.de>, Landen Chao <landen.chao@mediatek.com>
Subject: [PATCH net-next 2/6] net: dsa: mt7530: Extend device data ready for
 adding a new hardware
Date: Tue, 10 Dec 2019 16:14:38 +0800
Message-ID: <2d546d6bb15ff8b4b75af2220e20db4e634f4145.1575914275.git.landen.chao@mediatek.com>
X-Mailer: git-send-email 2.18.0
In-Reply-To: <cover.1575914275.git.landen.chao@mediatek.com>
References: <cover.1575914275.git.landen.chao@mediatek.com>
MIME-Version: 1.0
X-MTK: N
Sender: netdev-owner@vger.kernel.org
Precedence: bulk
List-ID: <netdev.vger.kernel.org>
X-Mailing-List: netdev@vger.kernel.org

Add a structure holding required operations for each device such as device
initialization, PHY port read or write, a checker whether PHY interface is
supported on a certain port, MAC port setup for either bus pad or a
specific PHY interface.

The patch is done for ready adding a new hardware MT7531.

Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/net/dsa/mt7530.c | 231 +++++++++++++++++++++++++++++----------
 drivers/net/dsa/mt7530.h |  29 ++++-
 2 files changed, 203 insertions(+), 57 deletions(-)

Index: linux-5.4.43/drivers/net/dsa/mt7530.c
===================================================================
--- linux-5.4.43.orig/drivers/net/dsa/mt7530.c
+++ linux-5.4.43/drivers/net/dsa/mt7530.c
@@ -373,7 +373,7 @@ mt7530_fdb_write(struct mt7530_priv *pri
 }
 
 static int
-mt7530_pad_clk_setup(struct dsa_switch *ds, int mode)
+mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t mode)
 {
 	struct mt7530_priv *priv = ds->priv;
 	u32 ncpo1, ssc_delta, trgint, i, xtal;
@@ -1355,13 +1355,111 @@ mt7530_setup(struct dsa_switch *ds)
 	return 0;
 }
 
-static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
+static bool mt7530_phy_supported(struct dsa_switch *ds, int port,
+				 const struct phylink_link_state *state)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	switch (port) {
+	case 0: /* Internal phy */
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		if (state->interface != PHY_INTERFACE_MODE_GMII)
+			goto unsupported;
+		break;
+	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+		if (!phy_interface_mode_is_rgmii(state->interface) &&
+		    state->interface != PHY_INTERFACE_MODE_MII &&
+		    state->interface != PHY_INTERFACE_MODE_GMII)
+			goto unsupported;
+		break;
+	case 6: /* 1st cpu port */
+		if (state->interface != PHY_INTERFACE_MODE_RGMII &&
+		    state->interface != PHY_INTERFACE_MODE_TRGMII)
+			goto unsupported;
+		break;
+	default:
+		dev_err(priv->dev, "%s: unsupported port: %i\n", __func__,
+			port);
+		goto unsupported;
+	}
+
+	return true;
+
+unsupported:
+	return false;
+}
+
+static bool mt753x_phy_supported(struct dsa_switch *ds, int port,
+				 const struct phylink_link_state *state)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	return priv->info->phy_supported(ds, port, state);
+}
+
+static int
+mt7530_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	/* Setup TX circuit incluing relevant PAD and driving */
+	mt7530_pad_clk_setup(ds, state->interface);
+
+	if (priv->id == ID_MT7530) {
+		/* Setup RX circuit, relevant PAD and driving on the
+		 * host which must be placed after the setup on the
+		 * device side is all finished.
+		 */
+		mt7623_pad_clk_setup(ds);
+	}
+
+	return 0;
+}
+
+static int
+mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	return priv->info->pad_setup(ds, state);
+}
+
+static int
+mt7530_mac_setup(struct dsa_switch *ds, int port, unsigned int mode,
+		 const struct phylink_link_state *state)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	/* Only need to setup port5. */
+	if (port != 5)
+		return 0;
+
+	mt7530_setup_port5(priv->ds, state->interface);
+
+	return 0;
+}
+
+static int mt753x_mac_setup(struct dsa_switch *ds, int port, unsigned int mode,
+			    const struct phylink_link_state *state)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	return priv->info->mac_setup(ds, port, mode, state);
+}
+
+static void mt753x_phylink_mac_config(struct dsa_switch *ds, int port,
 				      unsigned int mode,
 				      const struct phylink_link_state *state)
 {
 	struct mt7530_priv *priv = ds->priv;
 	u32 mcr_cur, mcr_new;
 
+	if (!mt753x_phy_supported(ds, port, state))
+		return;
+
 	switch (port) {
 	case 0: /* Internal phy */
 	case 1:
@@ -1374,24 +1472,15 @@ static void mt7530_phylink_mac_config(st
 	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
 		if (priv->p5_interface == state->interface)
 			break;
-		if (!phy_interface_mode_is_rgmii(state->interface) &&
-		    state->interface != PHY_INTERFACE_MODE_MII &&
-		    state->interface != PHY_INTERFACE_MODE_GMII)
-			return;
-
-		mt7530_setup_port5(ds, state->interface);
+		if (mt753x_mac_setup(ds, port, mode, state) < 0)
+			goto unsupported;
 		break;
 	case 6: /* 1st cpu port */
 		if (priv->p6_interface == state->interface)
 			break;
-
-		if (state->interface != PHY_INTERFACE_MODE_RGMII &&
-		    state->interface != PHY_INTERFACE_MODE_TRGMII)
-			return;
-
-		/* Setup TX circuit incluing relevant PAD and driving */
-		mt7530_pad_clk_setup(ds, state->interface);
-
+		mt753x_pad_setup(ds, state);
+		if (mt753x_mac_setup(ds, port, mode, state) < 0)
+			goto unsupported;
 		priv->p6_interface = state->interface;
 		break;
 	default:
@@ -1459,38 +1548,14 @@ static void mt7530_phylink_mac_link_up(s
 	mt7530_port_set_status(priv, port, 1);
 }
 
-static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
+static void mt753x_phylink_validate(struct dsa_switch *ds, int port,
 				    unsigned long *supported,
 				    struct phylink_link_state *state)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
-	switch (port) {
-	case 0: /* Internal phy */
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-		if (state->interface != PHY_INTERFACE_MODE_NA &&
-		    state->interface != PHY_INTERFACE_MODE_GMII)
-			goto unsupported;
-		break;
-	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
-		if (state->interface != PHY_INTERFACE_MODE_NA &&
-		    !phy_interface_mode_is_rgmii(state->interface) &&
-		    state->interface != PHY_INTERFACE_MODE_MII &&
-		    state->interface != PHY_INTERFACE_MODE_GMII)
-			goto unsupported;
-		break;
-	case 6: /* 1st cpu port */
-		if (state->interface != PHY_INTERFACE_MODE_NA &&
-		    state->interface != PHY_INTERFACE_MODE_RGMII &&
-		    state->interface != PHY_INTERFACE_MODE_TRGMII)
-			goto unsupported;
-		break;
-	default:
-		dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
-unsupported:
+	if (state->interface != PHY_INTERFACE_MODE_NA &&
+	    !mt753x_phy_supported(ds, port, state)) {
 		linkmode_zero(supported);
 		return;
 	}
@@ -1609,12 +1674,36 @@ static int mt7530_set_mac_eee(struct dsa
 	return 0;
 }
 
+static int
+mt753x_setup(struct dsa_switch *ds)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	return priv->info->setup(ds);
+}
+
+static int
+mt753x_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	return priv->info->phy_read(ds, port, regnum);
+}
+
+static int
+mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	return priv->info->phy_write(ds, port, regnum, val);
+}
+
 static const struct dsa_switch_ops mt7530_switch_ops = {
 	.get_tag_protocol	= mtk_get_tag_protocol,
-	.setup			= mt7530_setup,
+	.setup			= mt753x_setup,
 	.get_strings		= mt7530_get_strings,
-	.phy_read		= mt7530_phy_read,
-	.phy_write		= mt7530_phy_write,
+	.phy_read		= mt753x_phy_read,
+	.phy_write		= mt753x_phy_write,
 	.get_ethtool_stats	= mt7530_get_ethtool_stats,
 	.get_sset_count		= mt7530_get_sset_count,
 	.port_enable		= mt7530_port_enable,
@@ -1631,18 +1720,39 @@ static const struct dsa_switch_ops mt753
 	.port_vlan_del		= mt7530_port_vlan_del,
 	.port_mirror_add	= mt7530_port_mirror_add,
 	.port_mirror_del	= mt7530_port_mirror_del,
-	.phylink_validate	= mt7530_phylink_validate,
+	.phylink_validate	= mt753x_phylink_validate,
 	.phylink_mac_link_state = mt7530_phylink_mac_link_state,
-	.phylink_mac_config	= mt7530_phylink_mac_config,
+	.phylink_mac_config	= mt753x_phylink_mac_config,
 	.phylink_mac_link_down	= mt7530_phylink_mac_link_down,
 	.phylink_mac_link_up	= mt7530_phylink_mac_link_up,
 	.get_mac_eee		= mt7530_get_mac_eee,
 	.set_mac_eee		= mt7530_set_mac_eee,
 };
 
-static const struct of_device_id mt7530_of_match[] = {
-	{ .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, },
-	{ .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, },
+static const struct mt753x_info mt753x_table[] = {
+	[ID_MT7621] = {
+		.id = ID_MT7621,
+		.setup = mt7530_setup,
+		.phy_read = mt7530_phy_read,
+		.phy_write = mt7530_phy_write,
+		.phy_supported = mt7530_phy_supported,
+		.pad_setup = mt7530_pad_setup,
+		.mac_setup = mt7530_mac_setup,
+	},
+	[ID_MT7530] = {
+		.id = ID_MT7530,
+		.setup = mt7530_setup,
+		.phy_read = mt7530_phy_read,
+		.phy_write = mt7530_phy_write,
+		.phy_supported = mt7530_phy_supported,
+		.pad_setup = mt7530_pad_setup,
+		.mac_setup = mt7530_mac_setup,
+	},
+};
+
+ static const struct of_device_id mt7530_of_match[] = {
+	{ .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
+	{ .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, mt7530_of_match);
@@ -1680,8 +1790,19 @@ mt7530_probe(struct mdio_device *mdiodev
 	/* Get the hardware identifier from the devicetree node.
 	 * We will need it for some of the clock and regulator setup.
 	 */
-	priv->id = (unsigned int)(unsigned long)
-		of_device_get_match_data(&mdiodev->dev);
+	priv->info = of_device_get_match_data(&mdiodev->dev);
+	if (!priv->info)
+		return -EINVAL;
+
+	/* Sanity check if these required device operstaions are filled
+	 * properly.
+	 */
+	if (!priv->info->setup || !priv->info->phy_read ||
+	    !priv->info->phy_write || !priv->info->phy_supported ||
+	    !priv->info->pad_setup || !priv->info->mac_setup)
+		return -EINVAL;
+
+	priv->id = priv->info->id;
 
 	if (priv->id == ID_MT7530) {
 		priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
Index: linux-5.4.43/drivers/net/dsa/mt7530.h
===================================================================
--- linux-5.4.43.orig/drivers/net/dsa/mt7530.h
+++ linux-5.4.43/drivers/net/dsa/mt7530.h
@@ -11,7 +11,7 @@
 #define MT7530_NUM_FDB_RECORDS		2048
 #define MT7530_ALL_MEMBERS		0xff
 
-enum {
+enum mt753x_id {
 	ID_MT7530 = 0,
 	ID_MT7621 = 1,
 };
@@ -447,6 +447,32 @@ static const char *p5_intf_modes(unsigne
 	}
 }
 
+/* struct mt753x_info -	This is the main data structure for holding the specific
+ *			part for each supported device
+ * @setup:		Holding the handler to a device initialization
+ * @phy_read:		Holding the way reading PHY port
+ * @phy_write:		Holding the way writing PHY port
+ * @phy_supported:	Check if the PHY type is being supported on a certain
+ *			port
+ * @pad_setup:		Holding the way setting up the bus pad for a certain MAC
+ *			port
+ * @mac_setup:		Holding the way setting up the PHY attribute for a
+ *			certain MAC port
+ */
+struct mt753x_info {
+	enum mt753x_id id;
+
+	int (*setup)(struct dsa_switch *ds);
+	int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
+	int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val);
+	bool (*phy_supported)(struct dsa_switch *ds, int port,
+			      const struct phylink_link_state *state);
+	int (*pad_setup)(struct dsa_switch *ds,
+			 const struct phylink_link_state *state);
+	int (*mac_setup)(struct dsa_switch *ds, int port, unsigned int mode,
+			 const struct phylink_link_state *state);
+};
+
 /* struct mt7530_priv -	This is the main data structure for holding the state
  *			of the driver
  * @dev:		The device pointer
@@ -472,6 +498,7 @@ struct mt7530_priv {
 	struct regulator	*core_pwr;
 	struct regulator	*io_pwr;
 	struct gpio_desc	*reset;
+	const struct mt753x_info *info;
 	unsigned int		id;
 	bool			mcm;
 	phy_interface_t		p6_interface;