mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
e354b01baf
Driver for both soc (2.4GHz Wifi) and pci (5 GHz) now pull the calibration data from the nvmem subsystem. This allows us to move the userspace caldata extraction for the pci-e ath9k supported wifi into the device-tree definition of the device. wmac's nodes are also changed over to use nvmem-cells over OpenWrt's custom mtd-cal-data property. The wifi mac address remains correct after these changes, because When both "mac-address" and "calibration" are defined, the effective mac address comes from the cell corresponding to "mac-address" and mac-address-increment. Test passed on my tplink tl-wdr4310. Signed-off-by: Edward Chow <equu@openmail.cc>
113 lines
1.9 KiB
Plaintext
113 lines
1.9 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ar9344_tplink_tl-wdrxxxx.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
label-mac-device = &ath9k;
|
|
};
|
|
|
|
gpio-export {
|
|
compatible = "gpio-export";
|
|
|
|
gpio_usb1_power {
|
|
gpio-export,name = "tp-link:power:usb1";
|
|
gpio-export,output = <1>;
|
|
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
gpio_usb2_power {
|
|
gpio-export,name = "tp-link:power:usb2";
|
|
gpio-export,output = <1>;
|
|
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
gpio_ext_lna0 {
|
|
gpio-export,name = "tp-link:ext:lna0";
|
|
gpio-export,output = <1>;
|
|
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
gpio_ext_lna1 {
|
|
gpio-export,name = "tp-link:ext:lna1";
|
|
gpio-export,output = <1>;
|
|
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&leds {
|
|
usb1 {
|
|
label = "green:usb1";
|
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
|
trigger-sources = <&hub_port1>;
|
|
linux,default-trigger = "usbport";
|
|
};
|
|
|
|
usb2 {
|
|
label = "green:usb2";
|
|
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
|
trigger-sources = <&hub_port2>;
|
|
linux,default-trigger = "usbport";
|
|
};
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
};
|
|
|
|
&hub_port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hub_port1: port@1 {
|
|
reg = <1>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
|
|
hub_port2: port@2 {
|
|
reg = <2>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&wmac {
|
|
mac-address-increment = <(-1)>;
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
phy-mode = "rgmii";
|
|
|
|
qca,ar8327-initvals = <
|
|
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
|
|
0x10 0x80000080 /* POWER_ON_STRAP */
|
|
0x50 0xc737c737 /* LED_CTRL0 */
|
|
0x54 0x00000000 /* LED_CTRL1 */
|
|
0x58 0x00000000 /* LED_CTRL2 */
|
|
0x5c 0x0030c300 /* LED_CTRL3 */
|
|
0x7c 0x0000007e /* PORT0_STATUS */
|
|
>;
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
|
|
/* default for ar934x, except for 1000M */
|
|
pll-data = <0x06000000 0x00000101 0x00001616>;
|
|
|
|
nvmem-cells = <&macaddr_uboot_1fc00>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy0>;
|
|
};
|