openwrt/target/linux/lantiq/dts/DGN3500.dtsi
John Crispin 3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00

201 lines
3.4 KiB
Plaintext

/include/ "ar9.dtsi"
/ {
chosen {
bootargs-append = "root= console=ttyLTQ0,115200";
leds {
boot = &power_green;
failsafe = &power_red;
running = &power_green;
dsl = &dsl;
internet = &internet;
usb = &usb;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
spi-in {
lantiq,pins = "io16";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
spi-out {
lantiq,pins = "io10", "io17", "io18", "io21";
lantiq,open-drain = <0>;
lantiq,pull = <2>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mac-address = [ 00 11 22 33 44 55 ];
};
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
gpio-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
spi {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-gpio";
gpio-miso = <&gpio 16 0>;
gpio-mosi = <&gpio 17 0>;
gpio-sck = <&gpio 18 0>;
num-chipselects = <1>;
cs-gpios = <&gpio 10 1>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
spi-max-frequency = <1000000>;
partition@0 {
reg = <0x0 0x10000>;
label = "uboot";
read-only;
};
partition@10000 {
reg = <0x10000 0x10000>;
label = "uboot-env";
read-only;
};
ath9k_cal: partition@20000 {
reg = <0x20000 0x10000>;
label = "calibration";
read-only;
};
partition@50000 {
reg = <0x50000 0xfa0000>;
label = "firmware";
};
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0xf000>;
ath,pci-slot = <14>;
ath,eep-endian;
ath,eep-swap;
};
rtl8366rb {
compatible = "rtl8366rb";
gpio-sda = <&gpio 35 0>;
gpio-sck = <&gpio 37 0>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 36 1>;
linux,code = <0xf7>;
};
wps {
label = "wps";
gpios = <&gpio 54 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio 53 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
internet: internet {
label = "dgn3500:green:internet";
gpios = <&gpio 2 1>;
};
/*
internet red is missing
*/
dsl: dsl {
label = "dgn3500:green:dsl";
gpios = <&gpio 4 1>;
};
usb: usb {
label = "dgn3500:green:usb";
gpios = <&gpio 22 1>;
};
power_green: power {
label = "dgn3500:green:power";
gpios = <&gpio 34 1>;
default-state = "keep";
};
power_red: power2 {
label = "dgn3500:red:power";
gpios = <&gpio 39 1>;
};
/*
power amber is missing
*/
wifi: wifi {
label = "dgn3500:blue:wireless";
gpios = <&gpio 51 1>;
};
wps {
label = "dgn3500:green:wps";
gpios = <&gpio 52 1>;
};
};
};