mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
6bc9a6d0a8
Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47331
130 lines
3.5 KiB
Diff
130 lines
3.5 KiB
Diff
Author: Tim Harvey <tharvey@gateworks.com>
|
|
Date: Thu May 15 00:12:26 2014 -0700
|
|
|
|
net: igb: add i210/i211 support for phy read/write
|
|
|
|
The i210/i211 uses the MDICNFG register for the phy address instead of the
|
|
MDIC register.
|
|
|
|
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
|
|
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
|
|
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
|
|
@@ -135,7 +135,7 @@ out:
|
|
s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
|
{
|
|
struct e1000_phy_info *phy = &hw->phy;
|
|
- u32 i, mdic = 0;
|
|
+ u32 i, mdicnfg, mdic = 0;
|
|
s32 ret_val = 0;
|
|
|
|
if (offset > MAX_PHY_REG_ADDRESS) {
|
|
@@ -148,11 +148,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
|
|
* Control register. The MAC will take care of interfacing with the
|
|
* PHY to retrieve the desired data.
|
|
*/
|
|
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
|
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
|
- (E1000_MDIC_OP_READ));
|
|
+ switch (hw->mac.type) {
|
|
+ case e1000_i210:
|
|
+ case e1000_i211:
|
|
+ mdicnfg = rd32(E1000_MDICNFG);
|
|
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
|
+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
|
+ wr32(E1000_MDICNFG, mdicnfg);
|
|
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
|
+ (E1000_MDIC_OP_READ));
|
|
+ break;
|
|
+ default:
|
|
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
|
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
|
+ (E1000_MDIC_OP_READ));
|
|
+ break;
|
|
+ }
|
|
|
|
wr32(E1000_MDIC, mdic);
|
|
+ wrfl();
|
|
|
|
/* Poll the ready bit to see if the MDI read completed
|
|
* Increasing the time out as testing showed failures with
|
|
@@ -177,6 +191,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
|
|
*data = (u16) mdic;
|
|
|
|
out:
|
|
+ switch (hw->mac.type) {
|
|
+ /* restore MDICNFG to have phy's addr */
|
|
+ case e1000_i210:
|
|
+ case e1000_i211:
|
|
+ mdicnfg = rd32(E1000_MDICNFG);
|
|
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
|
+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
|
|
+ wr32(E1000_MDICNFG, mdicnfg);
|
|
+ break;
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
return ret_val;
|
|
}
|
|
|
|
@@ -191,7 +217,7 @@ out:
|
|
s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
|
{
|
|
struct e1000_phy_info *phy = &hw->phy;
|
|
- u32 i, mdic = 0;
|
|
+ u32 i, mdicnfg, mdic = 0;
|
|
s32 ret_val = 0;
|
|
|
|
if (offset > MAX_PHY_REG_ADDRESS) {
|
|
@@ -204,12 +230,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
|
* Control register. The MAC will take care of interfacing with the
|
|
* PHY to retrieve the desired data.
|
|
*/
|
|
- mdic = (((u32)data) |
|
|
- (offset << E1000_MDIC_REG_SHIFT) |
|
|
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
|
- (E1000_MDIC_OP_WRITE));
|
|
+ switch (hw->mac.type) {
|
|
+ case e1000_i210:
|
|
+ case e1000_i211:
|
|
+ mdicnfg = rd32(E1000_MDICNFG);
|
|
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
|
+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
|
+ wr32(E1000_MDICNFG, mdicnfg);
|
|
+ mdic = (((u32)data) |
|
|
+ (offset << E1000_MDIC_REG_SHIFT) |
|
|
+ (E1000_MDIC_OP_WRITE));
|
|
+ break;
|
|
+ default:
|
|
+ mdic = (((u32)data) |
|
|
+ (offset << E1000_MDIC_REG_SHIFT) |
|
|
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
|
+ (E1000_MDIC_OP_WRITE));
|
|
+ break;
|
|
+ }
|
|
|
|
wr32(E1000_MDIC, mdic);
|
|
+ wrfl();
|
|
|
|
/* Poll the ready bit to see if the MDI read completed
|
|
* Increasing the time out as testing showed failures with
|
|
@@ -233,6 +274,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
|
}
|
|
|
|
out:
|
|
+ switch (hw->mac.type) {
|
|
+ /* restore MDICNFG to have phy's addr */
|
|
+ case e1000_i210:
|
|
+ case e1000_i211:
|
|
+ mdicnfg = rd32(E1000_MDICNFG);
|
|
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
|
+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
|
|
+ wr32(E1000_MDICNFG, mdicnfg);
|
|
+ break;
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
return ret_val;
|
|
}
|
|
|