mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
35 lines
1.2 KiB
Diff
35 lines
1.2 KiB
Diff
From ddb523d853a0d64275424f935d8bb6da4af3b4dc Mon Sep 17 00:00:00 2001
|
|
From: Matthias Reichl <hias@horus.com>
|
|
Date: Fri, 2 Feb 2018 20:30:41 +0100
|
|
Subject: [PATCH 209/454] ASoC: pcm512x: revert downstream changes
|
|
|
|
This partially reverts commit 185ea05465aac8bf02a0d2b2f4289d42c72870b7
|
|
which was added by https://github.com/raspberrypi/linux/pull/1152
|
|
|
|
The downstream pcm512x changes caused a regression, it broke normal
|
|
use of the 24bit format with the codec, eg when using simple-audio-card.
|
|
|
|
The actual bug with 24bit playback is the incorrect usage
|
|
of physical_width in various drivers in the downstream tree
|
|
which causes 24bit data to be transmitted with 32 clock
|
|
cycles. So it's not the pcm512x that needs fixing, it's the
|
|
soundcard drivers.
|
|
|
|
Signed-off-by: Matthias Reichl <hias@horus.com>
|
|
---
|
|
sound/soc/codecs/pcm512x.c | 3 +--
|
|
1 file changed, 1 insertion(+), 2 deletions(-)
|
|
|
|
--- a/sound/soc/codecs/pcm512x.c
|
|
+++ b/sound/soc/codecs/pcm512x.c
|
|
@@ -851,8 +851,7 @@ static int pcm512x_set_dividers(struct s
|
|
int fssp;
|
|
int gpio;
|
|
|
|
- lrclk_div = snd_pcm_format_physical_width(params_format(params))
|
|
- * params_channels(params);
|
|
+ lrclk_div = snd_soc_params_to_frame_size(params);
|
|
if (lrclk_div == 0) {
|
|
dev_err(dev, "No LRCLK?\n");
|
|
return -EINVAL;
|