mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-21 09:42:09 +00:00
ddf64edfe1
While finalizing support for the U7623 with 512MB, I made an embarresing error and configured 1GB RAM for the board. I also forgot to move memory from the dtsi and to the dts. This commit takes care of my mistakes. While I am confessing my mistakes, I also note that I made a mistake in the commit message of the initial U7623 commit. It is the .bin-file, and not the .gz file that shall be sent to the device via tftp. v1->v2: * Remove redundant memory node (thanks Jonas Gorski) Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org