mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-21 09:42:09 +00:00
ddd259b0d5
At the moment the padding steps are hardcoded. Especially images for devices with a 4K sector size can be unnecessarily bloated using the hardcoded padding steps. It has been observed that 192Kb of padding was added to the image of a 4MB device, albeit due to the 4K sector size the minimum required extra padding for the jffs2 rootfs_data is 20Kb. In worst case it means that the image-size check could fail albeit there is enough space for all selected packages For device build code not exposing the blocksize, use the hardcoded padding further on. Signed-off-by: Mathias Kresin <dev@kresin.me>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org