mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
712258b772
1. Netgear R8000P DTS file 2. NAND fix 3. PCIe reset block 4. Integrated switch 5. PMB block Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
308 lines
7.1 KiB
Diff
308 lines
7.1 KiB
Diff
From 2961f69f151c0a6771f55cef46398fe49ca20902 Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
|
Date: Thu, 12 Nov 2020 16:08:32 +0100
|
|
Subject: [PATCH] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early
|
|
DTS files
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
They don't descibe hardware fully yet but it's enough to boot a system.
|
|
|
|
Some missing blocks:
|
|
1. PMC (Power Management Controller?)
|
|
2. Ethernet
|
|
3. Crypto
|
|
4. Thermal
|
|
|
|
Asus DTS is missing defining full NAND partitions layout and buttons.
|
|
|
|
Further changes will fill those gaps as soon as required bindings will
|
|
be found / tested / added.
|
|
|
|
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
---
|
|
arch/arm64/boot/dts/broadcom/Makefile | 1 +
|
|
arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 2 +
|
|
.../bcm4908/bcm4908-asus-gt-ac5300.dts | 66 +++++++
|
|
.../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 187 ++++++++++++++++++
|
|
4 files changed, 256 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
|
|
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
|
|
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
|
|
|
|
--- a/arch/arm64/boot/dts/broadcom/Makefile
|
|
+++ b/arch/arm64/boot/dts/broadcom/Makefile
|
|
@@ -4,5 +4,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp
|
|
bcm2837-rpi-3-b-plus.dtb \
|
|
bcm2837-rpi-cm3-io3.dtb
|
|
|
|
+subdir-y += bcm4908
|
|
subdir-y += northstar2
|
|
subdir-y += stingray
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
|
|
@@ -0,0 +1,2 @@
|
|
+# SPDX-License-Identifier: GPL-2.0
|
|
+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
|
|
@@ -0,0 +1,66 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+
|
|
+#include "bcm4908.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "asus,gt-ac5300", "brcm,bcm4908";
|
|
+ model = "Asus GT-AC5300";
|
|
+
|
|
+ memory@0 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x00 0x00 0x00 0x40000000>;
|
|
+ };
|
|
+
|
|
+ gpio-keys-polled {
|
|
+ compatible = "gpio-keys-polled";
|
|
+ poll-interval = <100>;
|
|
+
|
|
+ wifi {
|
|
+ label = "WiFi";
|
|
+ linux,code = <KEY_RFKILL>;
|
|
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ wps {
|
|
+ label = "WPS";
|
|
+ linux,code = <KEY_WPS_BUTTON>;
|
|
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ restart {
|
|
+ label = "Reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ brightness {
|
|
+ label = "LEDs";
|
|
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
|
|
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&nandcs {
|
|
+ nand-ecc-strength = <4>;
|
|
+ nand-ecc-step-size = <512>;
|
|
+ nand-on-flash-bbt;
|
|
+ brcm,nand-has-wp;
|
|
+
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ partition@0 {
|
|
+ label = "cferom";
|
|
+ reg = <0x0 0x100000>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
|
|
@@ -0,0 +1,187 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+
|
|
+#include <dt-bindings/interrupt-controller/irq.h>
|
|
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+/ {
|
|
+ interrupt-parent = <&gic>;
|
|
+
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart0;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ cpus {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ cpu0: cpu@0 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "brcm,brahma-b53";
|
|
+ reg = <0x0>;
|
|
+ next-level-cache = <&l2>;
|
|
+ };
|
|
+
|
|
+ cpu1: cpu@1 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "brcm,brahma-b53";
|
|
+ reg = <0x1>;
|
|
+ enable-method = "spin-table";
|
|
+ cpu-release-addr = <0x0 0xfff8>;
|
|
+ next-level-cache = <&l2>;
|
|
+ };
|
|
+
|
|
+ cpu2: cpu@2 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "brcm,brahma-b53";
|
|
+ reg = <0x2>;
|
|
+ enable-method = "spin-table";
|
|
+ cpu-release-addr = <0x0 0xfff8>;
|
|
+ next-level-cache = <&l2>;
|
|
+ };
|
|
+
|
|
+ cpu3: cpu@3 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "brcm,brahma-b53";
|
|
+ reg = <0x3>;
|
|
+ enable-method = "spin-table";
|
|
+ cpu-release-addr = <0x0 0xfff8>;
|
|
+ next-level-cache = <&l2>;
|
|
+ };
|
|
+
|
|
+ l2: l2-cache0 {
|
|
+ compatible = "cache";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ axi@81000000 {
|
|
+ compatible = "simple-bus";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges = <0x00 0x00 0x81000000 0x4000>;
|
|
+
|
|
+ gic: interrupt-controller@1000 {
|
|
+ compatible = "arm,gic-400";
|
|
+ #interrupt-cells = <3>;
|
|
+ #address-cells = <0>;
|
|
+ interrupt-controller;
|
|
+ reg = <0x1000 0x1000>,
|
|
+ <0x2000 0x2000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ timer {
|
|
+ compatible = "arm,armv8-timer";
|
|
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
+ };
|
|
+
|
|
+ pmu {
|
|
+ compatible = "arm,cortex-a53-pmu";
|
|
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
|
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
+ };
|
|
+
|
|
+ clocks {
|
|
+ periph_clk: periph_clk {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ clock-frequency = <50000000>;
|
|
+ clock-output-names = "periph";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ soc {
|
|
+ compatible = "simple-bus";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges = <0x00 0x00 0x80000000 0x10000>;
|
|
+
|
|
+ usb@c300 {
|
|
+ compatible = "generic-ehci";
|
|
+ reg = <0xc300 0x100>;
|
|
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ usb@c400 {
|
|
+ compatible = "generic-ohci";
|
|
+ reg = <0xc400 0x100>;
|
|
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ usb@d000 {
|
|
+ compatible = "generic-xhci";
|
|
+ reg = <0xd000 0x8c8>;
|
|
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ bus@ff800000 {
|
|
+ compatible = "simple-bus";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges = <0x00 0x00 0xff800000 0x3000>;
|
|
+
|
|
+ timer: timer@400 {
|
|
+ compatible = "brcm,bcm6328-timer", "syscon";
|
|
+ reg = <0x400 0x3c>;
|
|
+ };
|
|
+
|
|
+ gpio0: gpio-controller@500 {
|
|
+ compatible = "brcm,bcm6345-gpio";
|
|
+ reg-names = "dirout", "dat";
|
|
+ reg = <0x500 0x28>, <0x528 0x28>;
|
|
+
|
|
+ #gpio-cells = <2>;
|
|
+ gpio-controller;
|
|
+ };
|
|
+
|
|
+ uart0: serial@640 {
|
|
+ compatible = "brcm,bcm6345-uart";
|
|
+ reg = <0x640 0x18>;
|
|
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clocks = <&periph_clk>;
|
|
+ clock-names = "periph";
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ nand@1800 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
|
|
+ reg = <0x1800 0x600>, <0x2000 0x10>;
|
|
+ reg-names = "nand", "nand-int-base";
|
|
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ interrupt-names = "nand";
|
|
+ status = "okay";
|
|
+
|
|
+ nandcs: nandcs@0 {
|
|
+ compatible = "brcm,nandcs";
|
|
+ reg = <0>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reboot {
|
|
+ compatible = "syscon-reboot";
|
|
+ regmap = <&timer>;
|
|
+ offset = <0x34>;
|
|
+ mask = <1>;
|
|
+ };
|
|
+ };
|
|
+};
|