mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
e1bfcceb93
SVN-Revision: 22463
602 lines
16 KiB
Diff
602 lines
16 KiB
Diff
From c09d9002953c1182843050df1d4c639dea4af7f6 Mon Sep 17 00:00:00 2001
|
|
From: Lars-Peter Clausen <lars@metafoo.de>
|
|
Date: Sat, 17 Jul 2010 11:15:29 +0000
|
|
Subject: [PATCH] MTD: Nand: Add JZ4740 NAND driver
|
|
|
|
Add support for the NAND controller on JZ4740 SoCs.
|
|
|
|
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
|
|
Cc: David Woodhouse <dwmw2@infradead.org>
|
|
Cc: linux-mtd@lists.infradead.org
|
|
Cc: linux-mips@linux-mips.org
|
|
Cc: linux-kernel@vger.kernel.org
|
|
Patchwork: https://patchwork.linux-mips.org/patch/1470/
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
---
|
|
arch/mips/include/asm/mach-jz4740/jz4740_nand.h | 34 ++
|
|
drivers/mtd/nand/Kconfig | 6 +
|
|
drivers/mtd/nand/Makefile | 1 +
|
|
drivers/mtd/nand/jz4740_nand.c | 516 +++++++++++++++++++++++
|
|
4 files changed, 557 insertions(+), 0 deletions(-)
|
|
create mode 100644 arch/mips/include/asm/mach-jz4740/jz4740_nand.h
|
|
create mode 100644 drivers/mtd/nand/jz4740_nand.c
|
|
|
|
--- /dev/null
|
|
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
|
|
@@ -0,0 +1,34 @@
|
|
+/*
|
|
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
|
|
+ * JZ4740 SoC NAND controller driver
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#ifndef __ASM_MACH_JZ4740_JZ4740_NAND_H__
|
|
+#define __ASM_MACH_JZ4740_JZ4740_NAND_H__
|
|
+
|
|
+#include <linux/mtd/nand.h>
|
|
+#include <linux/mtd/partitions.h>
|
|
+
|
|
+struct jz_nand_platform_data {
|
|
+ int num_partitions;
|
|
+ struct mtd_partition *partitions;
|
|
+
|
|
+ struct nand_ecclayout *ecc_layout;
|
|
+
|
|
+ unsigned int busy_gpio;
|
|
+
|
|
+ void (*ident_callback)(struct platform_device *, struct nand_chip *,
|
|
+ struct mtd_partition **, int *num_partitions);
|
|
+};
|
|
+
|
|
+#endif
|
|
--- a/drivers/mtd/nand/Kconfig
|
|
+++ b/drivers/mtd/nand/Kconfig
|
|
@@ -526,4 +526,10 @@ config MTD_NAND_NUC900
|
|
This enables the driver for the NAND Flash on evaluation board based
|
|
on w90p910 / NUC9xx.
|
|
|
|
+config MTD_NAND_JZ4740
|
|
+ tristate "Support for JZ4740 SoC NAND controller"
|
|
+ depends on MACH_JZ4740
|
|
+ help
|
|
+ Enables support for NAND Flash on JZ4740 SoC based boards.
|
|
+
|
|
endif # MTD_NAND
|
|
--- a/drivers/mtd/nand/Makefile
|
|
+++ b/drivers/mtd/nand/Makefile
|
|
@@ -46,5 +46,6 @@ obj-$(CONFIG_MTD_NAND_NOMADIK) += nomad
|
|
obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
|
|
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
|
|
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
|
|
+obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
|
|
|
|
nand-objs := nand_base.o nand_bbt.o
|
|
--- /dev/null
|
|
+++ b/drivers/mtd/nand/jz4740_nand.c
|
|
@@ -0,0 +1,516 @@
|
|
+/*
|
|
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
|
|
+ * JZ4740 SoC NAND controller driver
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/slab.h>
|
|
+
|
|
+#include <linux/mtd/mtd.h>
|
|
+#include <linux/mtd/nand.h>
|
|
+#include <linux/mtd/partitions.h>
|
|
+
|
|
+#include <linux/gpio.h>
|
|
+
|
|
+#include <asm/mach-jz4740/jz4740_nand.h>
|
|
+
|
|
+#define JZ_REG_NAND_CTRL 0x50
|
|
+#define JZ_REG_NAND_ECC_CTRL 0x100
|
|
+#define JZ_REG_NAND_DATA 0x104
|
|
+#define JZ_REG_NAND_PAR0 0x108
|
|
+#define JZ_REG_NAND_PAR1 0x10C
|
|
+#define JZ_REG_NAND_PAR2 0x110
|
|
+#define JZ_REG_NAND_IRQ_STAT 0x114
|
|
+#define JZ_REG_NAND_IRQ_CTRL 0x118
|
|
+#define JZ_REG_NAND_ERR(x) (0x11C + ((x) << 2))
|
|
+
|
|
+#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
|
|
+#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
|
|
+#define JZ_NAND_ECC_CTRL_RS BIT(2)
|
|
+#define JZ_NAND_ECC_CTRL_RESET BIT(1)
|
|
+#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
|
|
+
|
|
+#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
|
|
+#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
|
|
+#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
|
|
+#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
|
|
+#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
|
|
+#define JZ_NAND_STATUS_ERROR BIT(0)
|
|
+
|
|
+#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
|
|
+#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
|
|
+
|
|
+#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
|
|
+#define JZ_NAND_MEM_CMD_OFFSET 0x08000
|
|
+
|
|
+struct jz_nand {
|
|
+ struct mtd_info mtd;
|
|
+ struct nand_chip chip;
|
|
+ void __iomem *base;
|
|
+ struct resource *mem;
|
|
+
|
|
+ void __iomem *bank_base;
|
|
+ struct resource *bank_mem;
|
|
+
|
|
+ struct jz_nand_platform_data *pdata;
|
|
+ bool is_reading;
|
|
+};
|
|
+
|
|
+static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
|
|
+{
|
|
+ return container_of(mtd, struct jz_nand, mtd);
|
|
+}
|
|
+
|
|
+static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
|
|
+{
|
|
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
+ struct nand_chip *chip = mtd->priv;
|
|
+ uint32_t reg;
|
|
+
|
|
+ if (ctrl & NAND_CTRL_CHANGE) {
|
|
+ BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
|
|
+ if (ctrl & NAND_ALE)
|
|
+ chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET;
|
|
+ else if (ctrl & NAND_CLE)
|
|
+ chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET;
|
|
+ else
|
|
+ chip->IO_ADDR_W = nand->bank_base;
|
|
+
|
|
+ reg = readl(nand->base + JZ_REG_NAND_CTRL);
|
|
+ if (ctrl & NAND_NCE)
|
|
+ reg |= JZ_NAND_CTRL_ASSERT_CHIP(0);
|
|
+ else
|
|
+ reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0);
|
|
+ writel(reg, nand->base + JZ_REG_NAND_CTRL);
|
|
+ }
|
|
+ if (dat != NAND_CMD_NONE)
|
|
+ writeb(dat, chip->IO_ADDR_W);
|
|
+}
|
|
+
|
|
+static int jz_nand_dev_ready(struct mtd_info *mtd)
|
|
+{
|
|
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
+ return gpio_get_value_cansleep(nand->pdata->busy_gpio);
|
|
+}
|
|
+
|
|
+static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
|
|
+{
|
|
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
+ uint32_t reg;
|
|
+
|
|
+ writel(0, nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
+
|
|
+ reg |= JZ_NAND_ECC_CTRL_RESET;
|
|
+ reg |= JZ_NAND_ECC_CTRL_ENABLE;
|
|
+ reg |= JZ_NAND_ECC_CTRL_RS;
|
|
+
|
|
+ switch (mode) {
|
|
+ case NAND_ECC_READ:
|
|
+ reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
|
|
+ nand->is_reading = true;
|
|
+ break;
|
|
+ case NAND_ECC_WRITE:
|
|
+ reg |= JZ_NAND_ECC_CTRL_ENCODING;
|
|
+ nand->is_reading = false;
|
|
+ break;
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
+}
|
|
+
|
|
+static int jz_nand_calculate_ecc_rs(struct mtd_info *mtd, const uint8_t *dat,
|
|
+ uint8_t *ecc_code)
|
|
+{
|
|
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
+ uint32_t reg, status;
|
|
+ int i;
|
|
+ unsigned int timeout = 1000;
|
|
+ static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4,
|
|
+ 0x8b, 0xff, 0xb7, 0x6f};
|
|
+
|
|
+ if (nand->is_reading)
|
|
+ return 0;
|
|
+
|
|
+ do {
|
|
+ status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
+ } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
|
|
+
|
|
+ if (timeout == 0)
|
|
+ return -1;
|
|
+
|
|
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
|
|
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
+
|
|
+ for (i = 0; i < 9; ++i)
|
|
+ ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i);
|
|
+
|
|
+ /* If the written data is completly 0xff, we also want to write 0xff as
|
|
+ * ecc, otherwise we will get in trouble when doing subpage writes. */
|
|
+ if (memcmp(ecc_code, empty_block_ecc, 9) == 0)
|
|
+ memset(ecc_code, 0xff, 9);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void jz_nand_correct_data(uint8_t *dat, int index, int mask)
|
|
+{
|
|
+ int offset = index & 0x7;
|
|
+ uint16_t data;
|
|
+
|
|
+ index += (index >> 3);
|
|
+
|
|
+ data = dat[index];
|
|
+ data |= dat[index+1] << 8;
|
|
+
|
|
+ mask ^= (data >> offset) & 0x1ff;
|
|
+ data &= ~(0x1ff << offset);
|
|
+ data |= (mask << offset);
|
|
+
|
|
+ dat[index] = data & 0xff;
|
|
+ dat[index+1] = (data >> 8) & 0xff;
|
|
+}
|
|
+
|
|
+static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
|
|
+ uint8_t *read_ecc, uint8_t *calc_ecc)
|
|
+{
|
|
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
|
|
+ int i, error_count, index;
|
|
+ uint32_t reg, status, error;
|
|
+ uint32_t t;
|
|
+ unsigned int timeout = 1000;
|
|
+
|
|
+ t = read_ecc[0];
|
|
+
|
|
+ if (t == 0xff) {
|
|
+ for (i = 1; i < 9; ++i)
|
|
+ t &= read_ecc[i];
|
|
+
|
|
+ t &= dat[0];
|
|
+ t &= dat[nand->chip.ecc.size / 2];
|
|
+ t &= dat[nand->chip.ecc.size - 1];
|
|
+
|
|
+ if (t == 0xff) {
|
|
+ for (i = 1; i < nand->chip.ecc.size - 1; ++i)
|
|
+ t &= dat[i];
|
|
+ if (t == 0xff)
|
|
+ return 0;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ for (i = 0; i < 9; ++i)
|
|
+ writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i);
|
|
+
|
|
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
+ reg |= JZ_NAND_ECC_CTRL_PAR_READY;
|
|
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
+
|
|
+ do {
|
|
+ status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
|
|
+ } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
|
|
+
|
|
+ if (timeout == 0)
|
|
+ return -1;
|
|
+
|
|
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
|
|
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
|
|
+
|
|
+ if (status & JZ_NAND_STATUS_ERROR) {
|
|
+ if (status & JZ_NAND_STATUS_UNCOR_ERROR)
|
|
+ return -1;
|
|
+
|
|
+ error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
|
|
+
|
|
+ for (i = 0; i < error_count; ++i) {
|
|
+ error = readl(nand->base + JZ_REG_NAND_ERR(i));
|
|
+ index = ((error >> 16) & 0x1ff) - 1;
|
|
+ if (index >= 0 && index < 512)
|
|
+ jz_nand_correct_data(dat, index, error & 0x1ff);
|
|
+ }
|
|
+
|
|
+ return error_count;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/* Copy paste of nand_read_page_hwecc_oob_first except for different eccpos
|
|
+ * handling. The ecc area is for 4k chips 72 bytes long and thus does not fit
|
|
+ * into the eccpos array. */
|
|
+static int jz_nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
|
|
+ struct nand_chip *chip, uint8_t *buf, int page)
|
|
+{
|
|
+ int i, eccsize = chip->ecc.size;
|
|
+ int eccbytes = chip->ecc.bytes;
|
|
+ int eccsteps = chip->ecc.steps;
|
|
+ uint8_t *p = buf;
|
|
+ unsigned int ecc_offset = chip->page_shift;
|
|
+
|
|
+ /* Read the OOB area first */
|
|
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
|
|
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
|
|
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
|
|
+
|
|
+ for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
|
|
+ int stat;
|
|
+
|
|
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
|
|
+ chip->read_buf(mtd, p, eccsize);
|
|
+
|
|
+ stat = chip->ecc.correct(mtd, p, &chip->oob_poi[i], NULL);
|
|
+ if (stat < 0)
|
|
+ mtd->ecc_stats.failed++;
|
|
+ else
|
|
+ mtd->ecc_stats.corrected += stat;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Copy-and-paste of nand_write_page_hwecc with different eccpos handling. */
|
|
+static void jz_nand_write_page_hwecc(struct mtd_info *mtd,
|
|
+ struct nand_chip *chip, const uint8_t *buf)
|
|
+{
|
|
+ int i, eccsize = chip->ecc.size;
|
|
+ int eccbytes = chip->ecc.bytes;
|
|
+ int eccsteps = chip->ecc.steps;
|
|
+ const uint8_t *p = buf;
|
|
+ unsigned int ecc_offset = chip->page_shift;
|
|
+
|
|
+ for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
|
|
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
|
|
+ chip->write_buf(mtd, p, eccsize);
|
|
+ chip->ecc.calculate(mtd, p, &chip->oob_poi[i]);
|
|
+ }
|
|
+
|
|
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
+static const char *part_probes[] = {"cmdline", NULL};
|
|
+#endif
|
|
+
|
|
+static int jz_nand_ioremap_resource(struct platform_device *pdev,
|
|
+ const char *name, struct resource **res, void __iomem **base)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
|
|
+ if (!*res) {
|
|
+ dev_err(&pdev->dev, "Failed to get platform %s memory\n", name);
|
|
+ ret = -ENXIO;
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ *res = request_mem_region((*res)->start, resource_size(*res),
|
|
+ pdev->name);
|
|
+ if (!*res) {
|
|
+ dev_err(&pdev->dev, "Failed to request %s memory region\n", name);
|
|
+ ret = -EBUSY;
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ *base = ioremap((*res)->start, resource_size(*res));
|
|
+ if (!*base) {
|
|
+ dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name);
|
|
+ ret = -EBUSY;
|
|
+ goto err_release_mem;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_release_mem:
|
|
+ release_mem_region((*res)->start, resource_size(*res));
|
|
+err:
|
|
+ *res = NULL;
|
|
+ *base = NULL;
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int __devinit jz_nand_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int ret;
|
|
+ struct jz_nand *nand;
|
|
+ struct nand_chip *chip;
|
|
+ struct mtd_info *mtd;
|
|
+ struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
+ struct mtd_partition *partition_info;
|
|
+ int num_partitions = 0;
|
|
+#endif
|
|
+
|
|
+ nand = kzalloc(sizeof(*nand), GFP_KERNEL);
|
|
+ if (!nand) {
|
|
+ dev_err(&pdev->dev, "Failed to allocate device structure.\n");
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
|
|
+ if (ret)
|
|
+ goto err_free;
|
|
+ ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem,
|
|
+ &nand->bank_base);
|
|
+ if (ret)
|
|
+ goto err_iounmap_mmio;
|
|
+
|
|
+ if (pdata && gpio_is_valid(pdata->busy_gpio)) {
|
|
+ ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev,
|
|
+ "Failed to request busy gpio %d: %d\n",
|
|
+ pdata->busy_gpio, ret);
|
|
+ goto err_iounmap_mem;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ mtd = &nand->mtd;
|
|
+ chip = &nand->chip;
|
|
+ mtd->priv = chip;
|
|
+ mtd->owner = THIS_MODULE;
|
|
+ mtd->name = "jz4740-nand";
|
|
+
|
|
+ chip->ecc.hwctl = jz_nand_hwctl;
|
|
+ chip->ecc.calculate = jz_nand_calculate_ecc_rs;
|
|
+ chip->ecc.correct = jz_nand_correct_ecc_rs;
|
|
+ chip->ecc.mode = NAND_ECC_HW_OOB_FIRST;
|
|
+ chip->ecc.size = 512;
|
|
+ chip->ecc.bytes = 9;
|
|
+
|
|
+ chip->ecc.read_page = jz_nand_read_page_hwecc_oob_first;
|
|
+ chip->ecc.write_page = jz_nand_write_page_hwecc;
|
|
+
|
|
+ if (pdata)
|
|
+ chip->ecc.layout = pdata->ecc_layout;
|
|
+
|
|
+ chip->chip_delay = 50;
|
|
+ chip->cmd_ctrl = jz_nand_cmd_ctrl;
|
|
+
|
|
+ if (pdata && gpio_is_valid(pdata->busy_gpio))
|
|
+ chip->dev_ready = jz_nand_dev_ready;
|
|
+
|
|
+ chip->IO_ADDR_R = nand->bank_base;
|
|
+ chip->IO_ADDR_W = nand->bank_base;
|
|
+
|
|
+ nand->pdata = pdata;
|
|
+ platform_set_drvdata(pdev, nand);
|
|
+
|
|
+ writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL);
|
|
+
|
|
+ ret = nand_scan_ident(mtd, 1, NULL);
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev, "Failed to scan nand\n");
|
|
+ goto err_gpio_free;
|
|
+ }
|
|
+
|
|
+ if (pdata && pdata->ident_callback) {
|
|
+ pdata->ident_callback(pdev, chip, &pdata->partitions,
|
|
+ &pdata->num_partitions);
|
|
+ }
|
|
+
|
|
+ ret = nand_scan_tail(mtd);
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev, "Failed to scan nand\n");
|
|
+ goto err_gpio_free;
|
|
+ }
|
|
+
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
+#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
+ num_partitions = parse_mtd_partitions(mtd, part_probes,
|
|
+ &partition_info, 0);
|
|
+#endif
|
|
+ if (num_partitions <= 0 && pdata) {
|
|
+ num_partitions = pdata->num_partitions;
|
|
+ partition_info = pdata->partitions;
|
|
+ }
|
|
+
|
|
+ if (num_partitions > 0)
|
|
+ ret = add_mtd_partitions(mtd, partition_info, num_partitions);
|
|
+ else
|
|
+#endif
|
|
+ ret = add_mtd_device(mtd);
|
|
+
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev, "Failed to add mtd device\n");
|
|
+ goto err_nand_release;
|
|
+ }
|
|
+
|
|
+ dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_nand_release:
|
|
+ nand_release(&nand->mtd);
|
|
+err_gpio_free:
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ gpio_free(pdata->busy_gpio);
|
|
+err_iounmap_mem:
|
|
+ iounmap(nand->bank_base);
|
|
+err_iounmap_mmio:
|
|
+ iounmap(nand->base);
|
|
+err_free:
|
|
+ kfree(nand);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int __devexit jz_nand_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct jz_nand *nand = platform_get_drvdata(pdev);
|
|
+
|
|
+ nand_release(&nand->mtd);
|
|
+
|
|
+ /* Deassert and disable all chips */
|
|
+ writel(0, nand->base + JZ_REG_NAND_CTRL);
|
|
+
|
|
+ iounmap(nand->bank_base);
|
|
+ release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem));
|
|
+ iounmap(nand->base);
|
|
+ release_mem_region(nand->mem->start, resource_size(nand->mem));
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ kfree(nand);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+struct platform_driver jz_nand_driver = {
|
|
+ .probe = jz_nand_probe,
|
|
+ .remove = __devexit_p(jz_nand_remove),
|
|
+ .driver = {
|
|
+ .name = "jz4740-nand",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init jz_nand_init(void)
|
|
+{
|
|
+ return platform_driver_register(&jz_nand_driver);
|
|
+}
|
|
+module_init(jz_nand_init);
|
|
+
|
|
+static void __exit jz_nand_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&jz_nand_driver);
|
|
+}
|
|
+module_exit(jz_nand_exit);
|
|
+
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
+MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC");
|
|
+MODULE_ALIAS("platform:jz4740-nand");
|