ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-06-03 16:10:51 +00:00
Code Issues Actions2 Packages Projects Releases Wiki Activity
dcf48fda05
openwrt/target/linux/ath79/image/generic-tp-link.mk
Anderson Vulczak 9b90dc05f5 ath79: add support for TP-Link Archer C6 v2 (US) and A6 (US/TW) 
This patch is based on  and adds support for TP-Link Archer
C6 v2 (US) and A6 (US/TW).

The hardware is the same as EU and RU variant, except for GPIOs
(LEDS/Buttons), flash(chip/partitions) and UART being available
on the board.

- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q127CS1G (16MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: 115200, 8n1 (header available on board)

Known issues:
 - Wireless: 5GHz is known to have lower RSSI signal, it affects speed and range.

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-c6-v2-us-squashfs-factory.bin
via the router Web interface.

Flash instruction using tftp recovery:

1. Connect the computer to one of the LAN ports of the router
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the
   tftp root directory renamed to ArcherA6v2_tp_recovery.bin.
4. Connect power cable to router, press and hold the
   reset button and turn the router on
5. Keep the reset button pressed until the WPS LED lights up
6. Wait ~150 seconds to complete flashing

Flash partitioning: I've followed  for defining the partition layout
for this patch. The partition named as "tplink" @ 0xfd0000 is marked
as read only as it is where some config for stock firmware are stored.
On stock firmware those stock partitions starts at 0xfd9400 however
I had not been able to make it functional starting on the same address as
on stock fw, so it has been partitioned following  and not the stock
partition layout for this specific partition. Due to that firmware/rootfs
partition lenght is 0xf80000 and not 0xf89400 as stock.

According to the GPL code, the EU/RU/JP variant does have different GPIO pins
assignment to LEDs and buttons, also the flash memory layout is different.

GPL Source Code: https://static.tp-link.com/resources/gpl/gpl-A6v2_us.tar.gz

Signed-off-by: Anderson Vulczak <andi@andi.com.br>
[wrap commit message, remove soft_ver change for C6 v2 EU, move LED aliases
to DTS files, remove dts-v1 in DTSI, node/property reorder in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-11-27 22:54:36 +01:00

588 lines
16 KiB
Makefile
Raw Blame History

include ./common-tp-link.mk
define Device/tplink_archer-a7-v5
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15104k
DEVICE_MODEL := Archer A7
DEVICE_VARIANT := v5
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := ARCHER-A7-V5
BOARDNAME := ARCHER-A7-V5
SUPPORTED_DEVICES += archer-a7-v5
endef
TARGET_DEVICES += tplink_archer-a7-v5
define Device/tplink_archer-c2-v3
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C2
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
TPLINK_BOARD_ID := ARCHER-C2-V3
endef
TARGET_DEVICES += tplink_archer-c2-v3
define Device/tplink_archer-c25-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C25
DEVICE_VARIANT := v1
TPLINK_BOARD_ID := ARCHER-C25-V1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
SUPPORTED_DEVICES += archer-c25-v1
endef
TARGET_DEVICES += tplink_archer-c25-v1
define Device/tplink_archer-c5-v1
$(Device/tplink-16mlzma)
ATH_SOC := qca9558
DEVICE_MODEL := Archer C5
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0xc5000001
SUPPORTED_DEVICES += archer-c5
endef
TARGET_DEVICES += tplink_archer-c5-v1
define Device/tplink_archer-c58-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 7936k
DEVICE_MODEL := Archer C58
DEVICE_VARIANT := v1
TPLINK_BOARD_ID := ARCHER-C58-V1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c58-v1
endef
TARGET_DEVICES += tplink_archer-c58-v1
define Device/tplink_archer-c59-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 14528k
DEVICE_MODEL := Archer C59
DEVICE_VARIANT := v1
TPLINK_BOARD_ID := ARCHER-C59-V1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c59-v1
endef
TARGET_DEVICES += tplink_archer-c59-v1
define Device/tplink_archer-c59-v2
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 14400k
DEVICE_MODEL := Archer C59
DEVICE_VARIANT := v2
TPLINK_BOARD_ID := ARCHER-C59-V2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c59-v2
endef
TARGET_DEVICES += tplink_archer-c59-v2
define Device/tplink_archer-c6-v2
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C6
DEVICE_VARIANT := v2 (EU/RU/JP)
TPLINK_BOARD_ID := ARCHER-C6-V2
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += tplink_archer-c6-v2
define Device/tplink_archer-c6-v2-us
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15872k
DEVICE_MODEL := Archer C6
DEVICE_VARIANT := v2 (US)
DEVICE_ALT0_VENDOR := TP-Link
DEVICE_ALT0_MODEL := Archer A6
DEVICE_ALT0_VARIANT := v2 (US/TW)
TPLINK_BOARD_ID := ARCHER-C6-V2-US
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += tplink_archer-c6-v2-us
define Device/tplink_archer-c60-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 7936k
DEVICE_MODEL := Archer C60
DEVICE_VARIANT := v1
TPLINK_BOARD_ID := ARCHER-C60-V1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c60-v1
endef
TARGET_DEVICES += tplink_archer-c60-v1
define Device/tplink_archer-c60-v2
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 7808k
DEVICE_MODEL := Archer C60
DEVICE_VARIANT := v2
TPLINK_BOARD_ID := ARCHER-C60-V2
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c60-v2
endef
TARGET_DEVICES += tplink_archer-c60-v2
define Device/tplink_archer-c7-v1
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_MODEL := Archer C7
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x75000001
SUPPORTED_DEVICES += archer-c7
endef
TARGET_DEVICES += tplink_archer-c7-v1
define Device/tplink_archer-c7-v2
$(Device/tplink-16mlzma)
ATH_SOC := qca9558
DEVICE_MODEL := Archer C7
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0xc7000002
SUPPORTED_DEVICES += archer-c7
IMAGES += factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tplink_archer-c7-v2
define Device/tplink_archer-c7-v4
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15104k
DEVICE_MODEL := Archer C7
DEVICE_VARIANT := v4
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := ARCHER-C7-V4
BOARDNAME := ARCHER-C7-V4
SUPPORTED_DEVICES += archer-c7-v4
endef
TARGET_DEVICES += tplink_archer-c7-v4
define Device/tplink_archer-c7-v5
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15360k
DEVICE_MODEL := Archer C7
DEVICE_VARIANT := v5
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := ARCHER-C7-V5
BOARDNAME := ARCHER-C7-V5
SUPPORTED_DEVICES += archer-c7-v5
endef
TARGET_DEVICES += tplink_archer-c7-v5
define Device/tplink_archer-d50-v1
ATH_SOC := qca9531
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := Archer D50
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
BOARDNAME := ARCHER-D50-V1
IMAGE_SIZE := 7808k
TPLINK_HWID := 0xC1200001
TPLINK_HWREV := 0x00000046
TPLINK_FLASHLAYOUT := 8Mqca
TPLINK_HWREVADD := 0x00000000
TPLINK_HVERSION := 3
KERNEL := kernel-bin | append-dtb | lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | \
tplink-v2-header -s -V "ver. 1.0"
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := tplink-v2-image -s -V "ver. 2.0" | \
append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += tplink_archer-d50-v1
define Device/tplink_cpe210-v1
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE210
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE210
SUPPORTED_DEVICES += cpe210
endef
TARGET_DEVICES += tplink_cpe210-v1
define Device/tplink_cpe210-v2
$(Device/tplink-safeloader)
ATH_SOC := qca9533
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE210
DEVICE_VARIANT := v2
TPLINK_BOARD_ID := CPE210V2
DEVICE_PACKAGES := rssileds
LOADER_TYPE := elf
SUPPORTED_DEVICES += cpe210-v2
endef
TARGET_DEVICES += tplink_cpe210-v2
define Device/tplink_cpe210-v3
$(Device/tplink-safeloader)
ATH_SOC := qca9533
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE210
DEVICE_VARIANT := v3
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE210V3
LOADER_TYPE := elf
SUPPORTED_DEVICES += cpe210-v3
endef
TARGET_DEVICES += tplink_cpe210-v3
define Device/tplink_cpe220-v2
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE220
DEVICE_VARIANT := v2
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE220V2
endef
TARGET_DEVICES += tplink_cpe220-v2
define Device/tplink_cpe220-v3
$(Device/tplink-safeloader)
ATH_SOC := qca9533
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE220
DEVICE_VARIANT := v3
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE220V3
LOADER_TYPE := elf
endef
TARGET_DEVICES += tplink_cpe220-v3
define Device/tplink_cpe510-v1
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE510
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE510
SUPPORTED_DEVICES += cpe510
endef
TARGET_DEVICES += tplink_cpe510-v1
define Device/tplink_cpe510-v2
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE510
DEVICE_VARIANT := v2
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE510V2
SUPPORTED_DEVICES += cpe510-v2
endef
TARGET_DEVICES += tplink_cpe510-v2
define Device/tplink_cpe510-v3
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE510
DEVICE_VARIANT := v3
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE510V3
SUPPORTED_DEVICES += cpe510-v3
endef
TARGET_DEVICES += tplink_cpe510-v3
define Device/tplink_cpe610-v1
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE610
DEVICE_VARIANT := v1
TPLINK_BOARD_ID := CPE610V1
endef
TARGET_DEVICES += tplink_cpe610-v1
define Device/tplink_re350k-v1
$(Device/tplink-safeloader)
ATH_SOC := qca9558
IMAGE_SIZE := 13760k
DEVICE_MODEL := RE350K
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := RE350K-V1
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
endef
TARGET_DEVICES += tplink_re350k-v1
define Device/tplink_rex5x-v1
$(Device/tplink-safeloader)
ATH_SOC := qca9558
IMAGE_SIZE := 6016k
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
endef
define Device/tplink_re355-v1
$(Device/tplink_rex5x-v1)
DEVICE_MODEL := RE355
DEVICE_VARIANT := v1
TPLINK_BOARD_ID := RE355
SUPPORTED_DEVICES += re355
endef
TARGET_DEVICES += tplink_re355-v1
define Device/tplink_re450-v1
$(Device/tplink_rex5x-v1)
DEVICE_MODEL := RE450
DEVICE_VARIANT := v1
TPLINK_BOARD_ID := RE450
SUPPORTED_DEVICES += re450
endef
TARGET_DEVICES += tplink_re450-v1
define Device/tplink_re450-v2
$(Device/tplink-safeloader)
ATH_SOC := qca9563
IMAGE_SIZE := 6016k
DEVICE_MODEL := RE450
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_BOARD_ID := RE450-V2
LOADER_TYPE := elf
endef
TARGET_DEVICES += tplink_re450-v2
define Device/tplink_tl-wdr3500-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar9344
DEVICE_MODEL := TL-WDR3500
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x35000001
SUPPORTED_DEVICES += tl-wdr3500
endef
TARGET_DEVICES += tplink_tl-wdr3500-v1
define Device/tplink_tl-wdr3600-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar9344
DEVICE_MODEL := TL-WDR3600
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x36000001
SUPPORTED_DEVICES += tl-wdr4300
endef
TARGET_DEVICES += tplink_tl-wdr3600-v1
define Device/tplink_tl-wdr4300-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar9344
DEVICE_MODEL := TL-WDR4300
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x43000001
SUPPORTED_DEVICES += tl-wdr4300
endef
TARGET_DEVICES += tplink_tl-wdr4300-v1
define Device/tplink_tl-wdr4900-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_MODEL := TL-WDR4900
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x49000002
endef
TARGET_DEVICES += tplink_tl-wdr4900-v2
define Device/tplink_tl-wr1043nd-v1
$(Device/tplink-8m)
ATH_SOC := ar9132
DEVICE_MODEL := TL-WR1043N/ND
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430001
SUPPORTED_DEVICES += tl-wr1043nd
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v1
define Device/tplink_tl-wr1043nd-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_MODEL := TL-WR1043N/ND
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430002
SUPPORTED_DEVICES += tl-wr1043nd-v2
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v2
define Device/tplink_tl-wr1043nd-v3
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_MODEL := TL-WR1043N/ND
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430003
SUPPORTED_DEVICES += tl-wr1043nd-v2
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v3
define Device/tplink_tl-wr1043nd-v4
$(Device/tplink-safeloader)
ATH_SOC := qca9563
IMAGE_SIZE := 15552k
DEVICE_MODEL := TL-WR1043N/ND
DEVICE_VARIANT := v4
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430004
TPLINK_BOARD_ID := TLWR1043NDV4
SUPPORTED_DEVICES += tl-wr1043nd-v4
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v4
define Device/tplink_tl-wr1043n-v5
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15104k
DEVICE_MODEL := TL-WR1043N
DEVICE_VARIANT := v5
TPLINK_BOARD_ID := TLWR1043NV5
SUPPORTED_DEVICES += tl-wr1043n-v5
endef
TARGET_DEVICES += tplink_tl-wr1043n-v5
define Device/tplink_tl-wr1045nd-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_MODEL := TL-WR1045ND
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10450002
endef
TARGET_DEVICES += tplink_tl-wr1045nd-v2
define Device/tplink_tl-wr2543-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar7242
DEVICE_MODEL := TL-WR2543N/ND
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x25430001
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99 | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99
SUPPORTED_DEVICES += tl-wr2543-v1
endef
TARGET_DEVICES += tplink_tl-wr2543-v1
define Device/tplink_tl-wr710n-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar9331
DEVICE_MODEL := TL-WR710N
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x07100001
SUPPORTED_DEVICES += tl-wr710n
endef
TARGET_DEVICES += tplink_tl-wr710n-v1
define Device/tplink_tl-wr810n-v1
$(Device/tplink-8mlzma)
ATH_SOC := qca9531
DEVICE_MODEL := TL-WR810N
DEVICE_VARIANT := v1
TPLINK_HWID := 0x8100001
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr810n-v1
define Device/tplink_tl-wr810n-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9533
DEVICE_MODEL := TL-WR810N
DEVICE_VARIANT := v2
TPLINK_HWID := 0x8100002
endef
TARGET_DEVICES += tplink_tl-wr810n-v2
define Device/tplink_tl-wr842n-v1
$(Device/tplink-8m)
ATH_SOC := ar7241
DEVICE_MODEL := TL-WR842N/ND
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x8420001
endef
TARGET_DEVICES += tplink_tl-wr842n-v1
define Device/tplink_tl-wr842n-v2
$(Device/tplink-8mlzma)
ATH_SOC := ar9341
DEVICE_MODEL := TL-WR842N/ND
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x8420002
SUPPORTED_DEVICES += tl-wr842n-v2
endef
TARGET_DEVICES += tplink_tl-wr842n-v2
define Device/tplink_tl-wr842n-v3
$(Device/tplink-16mlzma)
ATH_SOC := qca9533
DEVICE_MODEL := TL-WR842N
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x8420003
SUPPORTED_DEVICES += tl-wr842n-v3
endef
TARGET_DEVICES += tplink_tl-wr842n-v3
define Device/tplink_wbs210-v2
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := WBS210
DEVICE_VARIANT := v2
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := WBS210V2
endef
TARGET_DEVICES += tplink_wbs210-v2
define Device/tplink_wbs510-v1
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := WBS510
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := WBS510
SUPPORTED_DEVICES += wbs510
endef
TARGET_DEVICES += tplink_wbs510-v1
define Device/tplink_wbs510-v2
$(Device/tplink-loader-okli)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := WBS510
DEVICE_VARIANT := v2
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := WBS510V2
endef
TARGET_DEVICES += tplink_wbs510-v2
Reference in New Issue View Git Blame Copy Permalink