mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
6bac820c0f
Refresh backport patches with make target/linux/refresh. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
206 lines
6.4 KiB
Diff
206 lines
6.4 KiB
Diff
From bdce82e960d1205d118662f575cec39379984e34 Mon Sep 17 00:00:00 2001
|
|
From: Christian Marangi <ansuelsmth@gmail.com>
|
|
Date: Wed, 31 Jan 2024 03:26:04 +0100
|
|
Subject: [PATCH] net: mdio: ipq4019: add support for clock-frequency property
|
|
|
|
The IPQ4019 MDIO internally divide the clock feed by AHB based on the
|
|
MDIO_MODE reg. On reset or power up, the default value for the
|
|
divider is 0xff that reflect the divider set to /256.
|
|
|
|
This makes the MDC run at a very low rate, that is, considering AHB is
|
|
always fixed to 100Mhz, a value of 390KHz.
|
|
|
|
This hasn't have been a problem as MDIO wasn't used for time sensitive
|
|
operation, it is now that on IPQ807x is usually mounted with PHY that
|
|
requires MDIO to load their firmware (example Aquantia PHY).
|
|
|
|
To handle this problem and permit to set the correct designed MDC
|
|
frequency for the SoC add support for the standard "clock-frequency"
|
|
property for the MDIO node.
|
|
|
|
The divider supports value from /1 to /256 and the common value are to
|
|
set it to /16 to reflect 6.25Mhz or to /8 on newer platform to reflect
|
|
12.5Mhz.
|
|
|
|
To scan if the requested rate is supported by the divider, loop with
|
|
each supported divider and stop when the requested rate match the final
|
|
rate with the current divider. An error is returned if the rate doesn't
|
|
match any value.
|
|
|
|
On MDIO reset, the divider is restored to the requested value to prevent
|
|
any kind of downclocking caused by the divider reverting to a default
|
|
value.
|
|
|
|
To follow 802.3 spec of 2.5MHz of default value, if divider is set at
|
|
/256 and "clock-frequency" is not set in DT, assume nobody set the
|
|
divider and try to find the closest MDC rate to 2.5MHz. (in the case of
|
|
AHB set to 100MHz, it's 1.5625MHz)
|
|
|
|
While at is also document other bits of the MDIO_MODE reg to have a
|
|
clear idea of what is actually applied there.
|
|
|
|
Documentation of some BITs is skipped as they are marked as reserved and
|
|
their usage is not clear (RES 11:9 GENPHY 16:13 RES1 19:17)
|
|
|
|
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/mdio/mdio-ipq4019.c | 109 ++++++++++++++++++++++++++++++--
|
|
1 file changed, 103 insertions(+), 6 deletions(-)
|
|
|
|
--- a/drivers/net/mdio/mdio-ipq4019.c
|
|
+++ b/drivers/net/mdio/mdio-ipq4019.c
|
|
@@ -14,6 +14,20 @@
|
|
#include <linux/clk.h>
|
|
|
|
#define MDIO_MODE_REG 0x40
|
|
+#define MDIO_MODE_MDC_MODE BIT(12)
|
|
+/* 0 = Clause 22, 1 = Clause 45 */
|
|
+#define MDIO_MODE_C45 BIT(8)
|
|
+#define MDIO_MODE_DIV_MASK GENMASK(7, 0)
|
|
+#define MDIO_MODE_DIV(x) FIELD_PREP(MDIO_MODE_DIV_MASK, (x) - 1)
|
|
+#define MDIO_MODE_DIV_1 0x0
|
|
+#define MDIO_MODE_DIV_2 0x1
|
|
+#define MDIO_MODE_DIV_4 0x3
|
|
+#define MDIO_MODE_DIV_8 0x7
|
|
+#define MDIO_MODE_DIV_16 0xf
|
|
+#define MDIO_MODE_DIV_32 0x1f
|
|
+#define MDIO_MODE_DIV_64 0x3f
|
|
+#define MDIO_MODE_DIV_128 0x7f
|
|
+#define MDIO_MODE_DIV_256 0xff
|
|
#define MDIO_ADDR_REG 0x44
|
|
#define MDIO_DATA_WRITE_REG 0x48
|
|
#define MDIO_DATA_READ_REG 0x4c
|
|
@@ -26,9 +40,6 @@
|
|
#define MDIO_CMD_ACCESS_CODE_C45_WRITE 1
|
|
#define MDIO_CMD_ACCESS_CODE_C45_READ 2
|
|
|
|
-/* 0 = Clause 22, 1 = Clause 45 */
|
|
-#define MDIO_MODE_C45 BIT(8)
|
|
-
|
|
#define IPQ4019_MDIO_TIMEOUT 10000
|
|
#define IPQ4019_MDIO_SLEEP 10
|
|
|
|
@@ -41,6 +52,7 @@ struct ipq4019_mdio_data {
|
|
void __iomem *membase;
|
|
void __iomem *eth_ldo_rdy;
|
|
struct clk *mdio_clk;
|
|
+ unsigned int mdc_rate;
|
|
};
|
|
|
|
static int ipq4019_mdio_wait_busy(struct mii_bus *bus)
|
|
@@ -203,6 +215,38 @@ static int ipq4019_mdio_write_c22(struct
|
|
return 0;
|
|
}
|
|
|
|
+static int ipq4019_mdio_set_div(struct ipq4019_mdio_data *priv)
|
|
+{
|
|
+ unsigned long ahb_rate;
|
|
+ int div;
|
|
+ u32 val;
|
|
+
|
|
+ /* If we don't have a clock for AHB use the fixed value */
|
|
+ ahb_rate = IPQ_MDIO_CLK_RATE;
|
|
+ if (priv->mdio_clk)
|
|
+ ahb_rate = clk_get_rate(priv->mdio_clk);
|
|
+
|
|
+ /* MDC rate is ahb_rate/(MDIO_MODE_DIV + 1)
|
|
+ * While supported, internal documentation doesn't
|
|
+ * assure correct functionality of the MDIO bus
|
|
+ * with divider of 1, 2 or 4.
|
|
+ */
|
|
+ for (div = 8; div <= 256; div *= 2) {
|
|
+ /* The requested rate is supported by the div */
|
|
+ if (priv->mdc_rate == DIV_ROUND_UP(ahb_rate, div)) {
|
|
+ val = readl(priv->membase + MDIO_MODE_REG);
|
|
+ val &= ~MDIO_MODE_DIV_MASK;
|
|
+ val |= MDIO_MODE_DIV(div);
|
|
+ writel(val, priv->membase + MDIO_MODE_REG);
|
|
+
|
|
+ return 0;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* The requested rate is not supported */
|
|
+ return -EINVAL;
|
|
+}
|
|
+
|
|
static int ipq_mdio_reset(struct mii_bus *bus)
|
|
{
|
|
struct ipq4019_mdio_data *priv = bus->priv;
|
|
@@ -225,10 +269,58 @@ static int ipq_mdio_reset(struct mii_bus
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(priv->mdio_clk);
|
|
- if (ret == 0)
|
|
- mdelay(10);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ mdelay(10);
|
|
|
|
- return ret;
|
|
+ /* Restore MDC rate */
|
|
+ return ipq4019_mdio_set_div(priv);
|
|
+}
|
|
+
|
|
+static void ipq4019_mdio_select_mdc_rate(struct platform_device *pdev,
|
|
+ struct ipq4019_mdio_data *priv)
|
|
+{
|
|
+ unsigned long ahb_rate;
|
|
+ int div;
|
|
+ u32 val;
|
|
+
|
|
+ /* MDC rate defined in DT, we don't have to decide a default value */
|
|
+ if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
|
+ &priv->mdc_rate))
|
|
+ return;
|
|
+
|
|
+ /* If we don't have a clock for AHB use the fixed value */
|
|
+ ahb_rate = IPQ_MDIO_CLK_RATE;
|
|
+ if (priv->mdio_clk)
|
|
+ ahb_rate = clk_get_rate(priv->mdio_clk);
|
|
+
|
|
+ /* Check what is the current div set */
|
|
+ val = readl(priv->membase + MDIO_MODE_REG);
|
|
+ div = FIELD_GET(MDIO_MODE_DIV_MASK, val);
|
|
+
|
|
+ /* div is not set to the default value of /256
|
|
+ * Probably someone changed that (bootloader, other drivers)
|
|
+ * Keep this and don't overwrite it.
|
|
+ */
|
|
+ if (div != MDIO_MODE_DIV_256) {
|
|
+ priv->mdc_rate = DIV_ROUND_UP(ahb_rate, div + 1);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ /* If div is /256 assume nobody have set this value and
|
|
+ * try to find one MDC rate that is close the 802.3 spec of
|
|
+ * 2.5MHz
|
|
+ */
|
|
+ for (div = 256; div >= 8; div /= 2) {
|
|
+ /* Stop as soon as we found a divider that
|
|
+ * reached the closest value to 2.5MHz
|
|
+ */
|
|
+ if (DIV_ROUND_UP(ahb_rate, div) > 2500000)
|
|
+ break;
|
|
+
|
|
+ priv->mdc_rate = DIV_ROUND_UP(ahb_rate, div);
|
|
+ }
|
|
}
|
|
|
|
static int ipq4019_mdio_probe(struct platform_device *pdev)
|
|
@@ -252,6 +344,11 @@ static int ipq4019_mdio_probe(struct pla
|
|
if (IS_ERR(priv->mdio_clk))
|
|
return PTR_ERR(priv->mdio_clk);
|
|
|
|
+ ipq4019_mdio_select_mdc_rate(pdev, priv);
|
|
+ ret = ipq4019_mdio_set_div(priv);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
/* The platform resource is provided on the chipset IPQ5018 */
|
|
/* This resource is optional */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|