Piotr Dymacz eb9ba2b91e ar71xx: add support for YunCore CPE870 ... YunCore CPE870 is an outdoor CPE/AP based on Atheros AR9341. Short specification: - 535/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SKY65174-21), up to 30 dBm - internal 14 dBi panel antenna - 8x LED, 1x button - UART (JP1) header on PCB Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-cpe870-squashfs-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. setenv bootcmd "bootm 0x9f020000" 5. saveenv && reset Vendor firmware access (login/password): Admin/5up Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2016-11-21 10:05:40 +01:00
..
board.d	ar71xx: add support for YunCore CPE870	2016-11-21 10:05:40 +01:00
hotplug.d	ar71xx: add support for COMFAST CF-E380AC v1 and v2	2016-11-21 10:05:40 +01:00
uci-defaults	ar71xx: add support for D-Link DAP-2695 rev. A1	2016-10-27 01:50:42 +03:00
diag.sh	ar71xx: add support for YunCore CPE870	2016-11-21 10:05:40 +01:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00