mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-10 21:01:21 +00:00
dc4ffaa5ab
Currently enabling VLAN filtering blocks all traffic in the bridge immediately. That is because DSA ignores all VLAN setup when VLAN filtering is disabled, and when it is enabled, there is no VLAN entry in the VLAN table, causing all traffic to be blocked. Add patches to allow VLAN setup even if VLAN filtering is disabled. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org