openwrt/target/linux
Steve Glennon dc4f6b896f ipq40xx: add support for EnGenius ENS620EXT
Hardware
--------
CPU:   Qualcomm IPQ4018
RAM:   256M
FLASH: 32M SPI NOR W25Q256
ETH:   QCA8075
WiFi2: IPQ4018 2T2R 2SS b/g/n
WiFi5: IPQ4018 2T2R 2SS n/ac
LED:    - Power amber
        - LAN1(PoE) green
        - LAN2 green
        - Wi-Fi 2.4GHz green
        - Wi-Fi 5GHz green
BTN:    - WPS
UART:  115200n8 3.3V J1
       VCC(1) - GND(2) - TX(3) - RX(4)

Added basic support to get the device up and running for a sysupgrade
image only.
There is currently no way back to factory firmware, so this is a one-way
street to OpenWRT.
Install from factory condition is convoluted, and may brick your device:
1) Enable SSH and disable the CLI on the factory device from the web user
   interface (Management->Advanced)
2) Reboot the device
3) Override the default, limited SSH shell:
   a) Get into the ssh shell:
      ssh admin@192.168.1.1 /bin/sh --login
   b) Change the dropbear script to disable the limited shell. At the
      empty command prompt type:
        sed -i '/login_ssh/s/^/#/g’ dropbear
        /etc/init.d/dropbear restart
        exit
4) ssh in to a (now-) normal OpenWRT SSH session
5) Flash your built image
   a) scp openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin
      admin@192.168.1.1:/tmp/
   b) ssh admin@192.168.1.1
   c) sysupgrade -n
      /tmp/openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin
6) After flash completes (it may say "Upgrade failed" followed by
   "Upgrade completed") and device reboots, log in to newly flashed
   system. Note you will now need to ssh as root rather than admin.

Signed-off-by: Steve Glennon <s.glennon@cablelabs.com>
[whitespace fixes, reordered partitions, removed rng node from 4.14,
fixed 901-arm-boot-add-dts-files.patch]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-03-21 00:57:54 +01:00
..
adm5120 kernel: bump 3.18 to 3.18.133 2019-01-28 18:17:32 +01:00
adm8668 kernel: bump 3.18 to 3.18.133 2019-01-28 18:17:32 +01:00
apm821xx apm821xx: usb: xhci: fix semicolon.cocci warnings 2019-03-13 16:25:37 +01:00
ar7 kernel: bump 4.9 to 4.9.153 2019-01-28 18:17:32 +01:00
ar71xx kernel: bump 4.14 to 4.14.106 2019-03-18 10:02:51 +01:00
arc770 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
archs38 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
armvirt armvirt: 32: enable CONFIG_ARM_LPAE 2019-02-19 13:13:49 +00:00
at91 kernel: Build: Split kmod-regmap 2019-01-27 00:16:13 +01:00
ath25 kernel: bump 4.14 to 4.14.79 2018-11-05 16:00:00 +01:00
ath79 ath79: align naming of Ubiquiti Nanostation M 2019-03-18 20:55:24 +01:00
au1000 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
bcm53xx bcm53xx: add first DTS changes queued for the Linux 5.1 2019-02-01 07:09:27 +01:00
brcm47xx kernel: brcm47xx: Backport fixes for USB on WNDR3400v2 (fixes FS#2170) 2019-03-20 23:18:46 +01:00
brcm63xx brcm63xx: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
brcm2708 kernel: add kmod-input-touchscreen-ads7846 2019-02-24 01:17:01 +02:00
cns3xxx kernel: bump 4.19 to 4.19.21 2019-02-14 16:45:01 +01:00
gemini gemini: Generate padded kernel+rootfs images for DIR-685 2019-03-13 16:25:36 +01:00
generic kernel: Backport ar933x_uart build fix (fixes FS#2152) 2019-03-20 23:07:03 +01:00
imx6 kernel: disable CONFIG_USB_IMX21_HCD in default for kernel 4.14 2019-02-17 19:22:39 +01:00
ipq40xx ipq40xx: add support for EnGenius ENS620EXT 2019-03-21 00:57:54 +01:00
ipq806x ipq806x: Enlarge R7500v2 flash - use netgear partition 2019-03-18 20:55:52 +01:00
ixp4xx kernel: bump 4.9 to 4.9.160 2019-02-25 17:33:16 +01:00
kirkwood kernel: bump 4.19 to 4.19.24 2019-02-22 10:53:42 +01:00
lantiq lantiq: kernel 4.14: fix usb_phy1 reset status bit in vr9.dts 2019-03-18 20:42:30 +01:00
layerscape kernel: bump 4.14 to 4.14.106 2019-03-18 10:02:51 +01:00
malta malta: Add support for kernel 4.19 2019-01-13 16:31:40 +01:00
mcs814x kernel: bump 3.18 to 3.18.119 2018-08-20 13:03:23 +02:00
mediatek kernel: bump 4.14 to 4.14.99 2019-02-14 16:45:01 +01:00
mpc85xx mpc85xx: Fix Aerohive HiveAP-330 initramfs image 2019-03-02 13:04:54 +01:00
mvebu kernel: bump 4.14 to 4.14.106 2019-03-18 10:02:51 +01:00
mxs mxs: disable unused serial drivers 2019-03-11 19:35:43 +01:00
octeon octeon: fix typo in platform.sh 2019-01-12 19:40:13 +01:00
octeontx kernel: enable memory compaction 2018-10-09 14:29:55 +02:00
omap kernel: bump 4.14 to 4.14.77 2018-10-19 10:01:57 +02:00
omap24xx omap24xx: remove referece to not existing kmod-usb-musb-tusb6010 2018-01-15 13:13:34 +01:00
orion treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
oxnas kernel: bump 4.14 to 4.14.106 2019-03-18 10:02:51 +01:00
pistachio kernel: bump 4.14 to 4.14.91 2019-01-07 17:09:06 +01:00
ppc40x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ppc44x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ramips ramips: add support for I-O DATA WN-AC733GR3 2019-03-21 00:57:20 +01:00
rb532 kernel: bump 4.14 to 4.14.86 2018-12-10 11:48:44 +01:00
samsung kernel: Deactivate CONFIG_COMPAT_BRK 2018-12-26 17:32:48 +01:00
sunxi sunxi: add support for Orange Pi PC Plus 2019-03-09 18:55:15 +01:00
uml treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
x86 x86: video: disable buildtin amdgpu DRM driver 2019-02-17 19:22:39 +01:00
xburst kernel: bump 3.18 to 3.18.119 2018-08-20 13:03:23 +02:00
zynq kernel: Deactivate CONFIG_COMPAT_BRK 2018-12-26 17:32:48 +01:00
Makefile