openwrt/target/linux/mediatek/dts
Chukun Pan dc2d4d7393 mediatek: filogic: add Qihoo 360T7 support
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: ESMT F50L1G41LB 128MB
  RAM: MT5CC128M16JR-EK 256MB
  Ethernet: 4x 10/100/1000 Mbps
  Switch: MediaTek MT7531AE
  WiFi: MediaTek MT7976C
  Button: Reset, WPS
  Power: DC 12V 1A

Flash instructions:
  1. Attach UART, boot the stock firmware until
     the message about failsafe mode appears.
  2. Enter failsafe mode by pressing "f" and "Enter"
  3. Type "mount_root", then run
     "fw_setenv bootmenu_delay 3"
  4. Back up all mtd partitions before flashing.
  5. Reboot, U-Boot now presents a menu.
  6. Connect to your PC via the Gigabit port of the router,
     set a static ip on the ethernet interface of your PC.
     (ip 192.168.1.254, gateway 192.168.1.1)
  7. Select "Upgrade ATF BL2", then use this file:
     openwrt-mediatek-filogic-qihoo_360t7-preloader.bin
  8. Select "Upgrade ATF FIP", then use this file:
     openwrt-mediatek-filogic-qihoo_360t7-bl31-uboot.fip
  9. Download the initramfs image, and type "reset",
     waiting for tftp recovery to complete.
  a. After openwrt boots up, perform sysupgrade.

Note:
  1. Since NMBM is disabled, we must back up all partitions.
  2. Flash instructions is based on commit 28df7f7.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2023-05-27 11:17:08 +01:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: convert mtd-mac-address to nvmem implementation 2021-07-19 14:51:22 +02:00
mt7622-elecom-wrc-2533gent.dts mediatek: add an upstreamed spi-nand driver 2022-04-28 18:06:00 +08:00
mt7622-elecom-wrc-x3200gst3.dts treewide: remove label = "cpu" from DSA dt-binding 2023-02-26 22:22:48 +01:00
mt7622-linksys-e8450-ubi.dts mediatek: convert mtd-mac-address to nvmem implementation 2021-07-19 14:51:22 +02:00
mt7622-linksys-e8450.dts mediatek: convert mtd-mac-address to nvmem implementation 2021-07-19 14:51:22 +02:00
mt7622-linksys-e8450.dtsi treewide: remove label = "cpu" from DSA dt-binding 2023-02-26 22:22:48 +01:00
mt7622-netgear-wax206.dts mediatek: no longer hard-code WAN PHY of Netgear WAX206 2023-04-30 17:27:00 +01:00
mt7622-reyee-ax3200-e5.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-rfb1-ubi.dts mediatek: add an upstreamed spi-nand driver 2022-04-28 18:06:00 +08:00
mt7622-ruijie-rg-ew3200.dtsi treewide: remove label = "cpu" from DSA dt-binding 2023-02-26 22:22:48 +01:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-totolink-a8000ru.dts mediatek: mt7622: add missing vbus regulator node to totolink-a8000ru dts 2022-07-07 00:22:23 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: mt7622: fix DTS compatible of UniFi 6 LR variants 2022-09-03 02:27:59 +01:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: mt7622: fix DTS compatible of UniFi 6 LR variants 2022-09-03 02:27:59 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: fix ledbar of UniFi 6 LR when running custom U-Boot 2022-09-11 20:26:42 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: mt7622: fix DTS compatible of UniFi 6 LR variants 2022-09-03 02:27:59 +01:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: add Ubiquiti UniFi 6 LR v2 targets 2022-06-11 19:51:33 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: mt7622: fix white dome LED of UniFi 6 LR 2022-07-04 19:19:52 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: UniFi 6 LR: disable RTC 2022-06-18 17:32:07 +01:00
mt7622-xiaomi-redmi-router-ax6s.dts treewide: remove label = "cpu" from DSA dt-binding 2023-02-26 22:22:48 +01:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: mt7623: rework images for U7623-02 board 2022-01-23 20:20:37 +00:00
mt7623a-unielec-u7623-02.dtsi treewide: remove label = "cpu" from DSA dt-binding 2023-02-26 22:22:48 +01:00
mt7629-iptime-a6004mx.dts treewide: remove label = "cpu" from DSA dt-binding 2023-02-26 22:22:48 +01:00
mt7981b-cudy-wr3000-v1.dts mediatek: add support for Cudy WR3000 v1 2023-05-18 01:46:13 +02:00
mt7981b-glinet-gl-mt3000.dts mediatek: add support for the GL.iNet GL-MT3000 2023-05-18 02:41:49 +01:00
mt7981b-qihoo-360t7.dts mediatek: filogic: add Qihoo 360T7 support 2023-05-27 11:17:08 +01:00
mt7986a-asus-tuf-ax4200.dts mediatek: apply stock configuration for WAN-LED 2023-05-11 23:09:04 +02:00
mt7986a-bananapi-bpi-r3-emmc-nor.dts mediatek: add support for Bananapi BPi-R3 2022-08-30 13:36:28 +01:00
mt7986a-bananapi-bpi-r3-emmc-snand.dts mediatek: add support for Bananapi BPi-R3 2022-08-30 13:36:28 +01:00
mt7986a-bananapi-bpi-r3-nor.dts mediatek: add support for Bananapi BPi-R3 2022-08-30 13:36:28 +01:00
mt7986a-bananapi-bpi-r3-snand.dts mediatek: add support for Bananapi BPi-R3 2022-08-30 13:36:28 +01:00
mt7986a-bananapi-bpi-r3.dts mediatek: bpi-r3: allow up to 3W per SFP module 2023-04-20 01:03:56 +01:00
mt7986a-tplink-tl-xdr4288.dts mediatek: add support for TP-Link TL-XDR4288/608x 2023-04-22 04:10:19 +01:00
mt7986a-tplink-tl-xdr6086.dts mediatek: add support for TP-Link TL-XDR4288/608x 2023-04-22 04:10:19 +01:00
mt7986a-tplink-tl-xdr6088.dts mediatek: add support for TP-Link TL-XDR4288/608x 2023-04-22 04:10:19 +01:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: add support for TP-Link TL-XDR4288/608x 2023-04-22 04:10:19 +01:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi treewide: remove label = "cpu" from DSA dt-binding 2023-02-26 22:22:48 +01:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: add support for Zyxel EX5601-T0 router 2023-05-22 17:58:59 +02:00