ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
dbe53352e3
openwrt/package/kernel/linux/modules/block.mk
Daniel Golle dbe53352e3 kernel: add kmod-nvme package 
Add driver for NVM Express block devices, ie. PCIe connected SSDs.

Targets which allow booting from NVMe (x86, maybe some mvebu boards come
to mind) should have it built-in, so rootfs can be mounted from there.
For targets without NVMe support in bootloader or BIOS/firmware it's
sufficient to provide the kernel module package.

On targets having the NVMe driver built-in the resulting kmod package
is an empty dummy. In any case, depending on or installing kmod-nvme
results in driver support being available (either because it was already
built-in or because the relevant kernel modules are added and loaded).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-30 19:04:36 +02:00

615 lines
15 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
BLOCK_MENU:=Block Devices
define KernelPackage/aoe
SUBMENU:=$(BLOCK_MENU)
TITLE:=ATA over Ethernet support
KCONFIG:=CONFIG_ATA_OVER_ETH
FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
AUTOLOAD:=$(call AutoLoad,30,aoe)
endef
define KernelPackage/aoe/description
Kernel support for ATA over Ethernet
endef
$(eval $(call KernelPackage,aoe))
define KernelPackage/ata-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=Serial and Parallel ATA support
DEPENDS:=@PCI_SUPPORT||TARGET_sunxi +kmod-scsi-core
KCONFIG:=CONFIG_ATA
FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
ifneq ($(wildcard $(LINUX_DIR)/drivers/ata/libahci.ko),)
FILES+=$(LINUX_DIR)/drivers/ata/libahci.ko
endif
endef
$(eval $(call KernelPackage,ata-core))
define AddDepends/ata
SUBMENU:=$(BLOCK_MENU)
DEPENDS+=+kmod-ata-core $(1)
endef
define KernelPackage/ata-ahci
TITLE:=AHCI Serial ATA support
KCONFIG:=CONFIG_SATA_AHCI
FILES:= \
$(LINUX_DIR)/drivers/ata/ahci.ko
AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-ahci/description
Support for AHCI Serial ATA controllers
endef
$(eval $(call KernelPackage,ata-ahci))
define KernelPackage/ata-ahci-platform
TITLE:=AHCI Serial ATA Platform support
KCONFIG:=CONFIG_SATA_AHCI_PLATFORM
FILES:= \
$(LINUX_DIR)/drivers/ata/ahci_platform.ko \
$(LINUX_DIR)/drivers/ata/libahci_platform.ko
AUTOLOAD:=$(call AutoLoad,40,libahci libahci_platform ahci_platform,1)
$(call AddDepends/ata,@TARGET_ipq806x||TARGET_layerscape||TARGET_sunxi)
endef
define KernelPackage/ata-ahci-platform/description
Platform support for AHCI Serial ATA controllers
endef
$(eval $(call KernelPackage,ata-ahci-platform))
define KernelPackage/ata-artop
TITLE:=ARTOP 6210/6260 PATA support
KCONFIG:=CONFIG_PATA_ARTOP
FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-artop/description
PATA support for ARTOP 6210/6260 host controllers
endef
$(eval $(call KernelPackage,ata-artop))
define KernelPackage/ata-marvell-sata
TITLE:=Marvell Serial ATA support
KCONFIG:=CONFIG_SATA_MV
FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-marvell-sata/description
SATA support for marvell chipsets
endef
$(eval $(call KernelPackage,ata-marvell-sata))
define KernelPackage/ata-nvidia-sata
TITLE:=Nvidia Serial ATA support
KCONFIG:=CONFIG_SATA_NV
FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
$(call AddDepends/ata)
endef
$(eval $(call KernelPackage,ata-nvidia-sata))
define KernelPackage/ata-pdc202xx-old
TITLE:=Older Promise PATA controller support
KCONFIG:= \
CONFIG_ATA_SFF=y \
CONFIG_PATA_PDC_OLD
FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-pdc202xx-old/description
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters
endef
$(eval $(call KernelPackage,ata-pdc202xx-old))
define KernelPackage/ata-piix
TITLE:=Intel PIIX PATA/SATA support
KCONFIG:=CONFIG_ATA_PIIX
FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-piix/description
SATA support for Intel ICH5/6/7/8 series host controllers and
PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers
endef
$(eval $(call KernelPackage,ata-piix))
define KernelPackage/ata-sil
TITLE:=Silicon Image SATA support
KCONFIG:=CONFIG_SATA_SIL
FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-sil/description
Support for Silicon Image Serial ATA controllers
endef
$(eval $(call KernelPackage,ata-sil))
define KernelPackage/ata-sil24
TITLE:=Silicon Image 3124/3132 SATA support
KCONFIG:=CONFIG_SATA_SIL24
FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-sil24/description
Support for Silicon Image 3124/3132 Serial ATA controllers
endef
$(eval $(call KernelPackage,ata-sil24))
define KernelPackage/ata-via-sata
TITLE:=VIA SATA support
KCONFIG:=CONFIG_SATA_VIA
FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-via-sata/description
This option enables support for VIA Serial ATA
endef
$(eval $(call KernelPackage,ata-via-sata))
define KernelPackage/block2mtd
SUBMENU:=$(BLOCK_MENU)
TITLE:=Block device MTD emulation
KCONFIG:=CONFIG_MTD_BLOCK2MTD
FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
endef
$(eval $(call KernelPackage,block2mtd))
define KernelPackage/dax
SUBMENU:=$(BLOCK_MENU)
TITLE:=DAX: direct access to differentiated memory
KCONFIG:=CONFIG_DAX
FILES:=$(LINUX_DIR)/drivers/dax/dax.ko
endef
$(eval $(call KernelPackage,dax))
define KernelPackage/dm
SUBMENU:=$(BLOCK_MENU)
TITLE:=Device Mapper
DEPENDS:=+kmod-crypto-manager +kmod-dax +KERNEL_KEYS:kmod-keys-encrypted
# All the "=n" are unnecessary, they're only there
# to stop the config from asking the question.
# MIRROR is M because I've needed it for pvmove.
KCONFIG:= \
CONFIG_BLK_DEV_MD=n \
CONFIG_DM_DEBUG=n \
CONFIG_DM_UEVENT=n \
CONFIG_DM_DELAY=n \
CONFIG_DM_LOG_WRITES=n \
CONFIG_DM_MQ_DEFAULT=n \
CONFIG_DM_MULTIPATH=n \
CONFIG_DM_ZERO=n \
CONFIG_DM_SNAPSHOT=n \
CONFIG_DM_LOG_USERSPACE=n \
CONFIG_MD=y \
CONFIG_BLK_DEV_DM \
CONFIG_DM_CRYPT \
CONFIG_DM_MIRROR
FILES:= \
$(LINUX_DIR)/drivers/md/dm-mod.ko \
$(LINUX_DIR)/drivers/md/dm-crypt.ko \
$(LINUX_DIR)/drivers/md/dm-log.ko \
$(LINUX_DIR)/drivers/md/dm-mirror.ko \
$(LINUX_DIR)/drivers/md/dm-region-hash.ko
AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt,1)
endef
define KernelPackage/dm/description
Kernel module necessary for LVM2 support
endef
$(eval $(call KernelPackage,dm))
define KernelPackage/dm-raid
SUBMENU:=$(BLOCK_MENU)
TITLE:=LVM2 raid support
DEPENDS:=+kmod-dm +kmod-md-mod \
+kmod-md-raid0 +kmod-md-raid1 +kmod-md-raid10 +kmod-md-raid456
KCONFIG:= \
CONFIG_DM_RAID
FILES:=$(LINUX_DIR)/drivers/md/dm-raid.ko
AUTOLOAD:=$(call AutoLoad,31,dm-raid)
endef
define KernelPackage/dm-raid/description
Kernel module necessary for LVM2 raid support
endef
$(eval $(call KernelPackage,dm-raid))
define KernelPackage/iscsi-initiator
SUBMENU:=$(BLOCK_MENU)
TITLE:=iSCSI Initiator over TCP/IP
DEPENDS:=+kmod-scsi-core +kmod-crypto-hash
KCONFIG:= \
CONFIG_INET \
CONFIG_SCSI_LOWLEVEL=y \
CONFIG_ISCSI_TCP \
CONFIG_SCSI_ISCSI_ATTRS=y
FILES:= \
$(LINUX_DIR)/drivers/scsi/iscsi_tcp.ko \
$(LINUX_DIR)/drivers/scsi/libiscsi.ko \
$(LINUX_DIR)/drivers/scsi/libiscsi_tcp.ko \
$(LINUX_DIR)/drivers/scsi/scsi_transport_iscsi.ko
AUTOLOAD:=$(call AutoProbe,libiscsi libiscsi_tcp scsi_transport_iscsi iscsi_tcp)
endef
define KernelPackage/iscsi-initiator/description
The iSCSI Driver provides a host with the ability to access storage through an
IP network. The driver uses the iSCSI protocol to transport SCSI requests and
responses over a TCP/IP network between the host (the "initiator") and "targets".
endef
$(eval $(call KernelPackage,iscsi-initiator))
define KernelPackage/md-mod
SUBMENU:=$(BLOCK_MENU)
TITLE:=MD RAID
KCONFIG:= \
CONFIG_MD=y \
CONFIG_BLK_DEV_MD=m \
CONFIG_MD_AUTODETECT=y \
CONFIG_MD_FAULTY=n
FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
AUTOLOAD:=$(call AutoLoad,27,md-mod)
endef
define KernelPackage/md-mod/description
Kernel RAID md module (md-mod.ko).
You will need to select at least one RAID level module below.
endef
$(eval $(call KernelPackage,md-mod))
define KernelPackage/md/Depends
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=kmod-md-mod $(1)
endef
define KernelPackage/md-linear
$(call KernelPackage/md/Depends,)
TITLE:=RAID Linear Module
KCONFIG:=CONFIG_MD_LINEAR
FILES:=$(LINUX_DIR)/drivers/md/linear.ko
AUTOLOAD:=$(call AutoLoad,28,linear)
endef
define KernelPackage/md-linear/description
RAID "Linear" or "Append" driver module (linear.ko)
endef
$(eval $(call KernelPackage,md-linear))
define KernelPackage/md-raid0
$(call KernelPackage/md/Depends,)
TITLE:=RAID0 Module
KCONFIG:=CONFIG_MD_RAID0
FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
AUTOLOAD:=$(call AutoLoad,28,raid0)
endef
define KernelPackage/md-raid0/description
RAID Level 0 (Striping) driver module (raid0.ko)
endef
$(eval $(call KernelPackage,md-raid0))
define KernelPackage/md-raid1
$(call KernelPackage/md/Depends,)
TITLE:=RAID1 Module
KCONFIG:=CONFIG_MD_RAID1
FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
AUTOLOAD:=$(call AutoLoad,28,raid1)
endef
define KernelPackage/md-raid1/description
RAID Level 1 (Mirroring) driver (raid1.ko)
endef
$(eval $(call KernelPackage,md-raid1))
define KernelPackage/md-raid10
$(call KernelPackage/md/Depends,)
TITLE:=RAID10 Module
KCONFIG:=CONFIG_MD_RAID10
FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
AUTOLOAD:=$(call AutoLoad,28,raid10)
endef
define KernelPackage/md-raid10/description
RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
endef
$(eval $(call KernelPackage,md-raid10))
define KernelPackage/md-raid456
$(call KernelPackage/md/Depends,+kmod-lib-raid6 +kmod-lib-xor +kmod-lib-crc32c)
TITLE:=RAID Level 456 Driver
KCONFIG:= \
CONFIG_ASYNC_CORE \
CONFIG_ASYNC_MEMCPY \
CONFIG_ASYNC_XOR \
CONFIG_ASYNC_PQ \
CONFIG_ASYNC_RAID6_RECOV \
CONFIG_ASYNC_RAID6_TEST=n \
CONFIG_MD_RAID456 \
CONFIG_MULTICORE_RAID456=n
FILES:= \
$(LINUX_DIR)/crypto/async_tx/async_tx.ko \
$(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
$(LINUX_DIR)/crypto/async_tx/async_xor.ko \
$(LINUX_DIR)/crypto/async_tx/async_pq.ko \
$(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
$(LINUX_DIR)/drivers/md/raid456.ko
AUTOLOAD:=$(call AutoLoad,28, async_tx async_memcpy async_xor async_pq async_raid6_recov raid456)
endef
define KernelPackage/md-raid456/description
RAID Level 4,5,6 kernel module (raid456.ko)
Includes the following modules required by
raid456.ko:
xor.ko
async_tx.ko
async_xor.ko
async_memcpy.ko
async_pq.ko
async_raid5_recov.ko
raid6_pq.ko
endef
$(eval $(call KernelPackage,md-raid456))
define KernelPackage/md-multipath
$(call KernelPackage/md/Depends,)
TITLE:=MD Multipath Module
KCONFIG:=CONFIG_MD_MULTIPATH
FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
AUTOLOAD:=$(call AutoLoad,29,multipath)
endef
define KernelPackage/md-multipath/description
Multipath driver module (multipath.ko)
endef
$(eval $(call KernelPackage,md-multipath))
define KernelPackage/libsas
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=@TARGET_x86
TITLE:=SAS Domain Transport Attributes
KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
CONFIG_SCSI_SAS_ATTRS \
CONFIG_SCSI_SAS_ATA=y \
CONFIG_SCSI_SAS_HOST_SMP=y \
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
FILES:= \
$(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
$(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
endef
define KernelPackage/libsas/description
SAS Domain Transport Attributes support
endef
$(eval $(call KernelPackage,libsas,1))
define KernelPackage/loop
SUBMENU:=$(BLOCK_MENU)
TITLE:=Loopback device support
KCONFIG:= \
CONFIG_BLK_DEV_LOOP \
CONFIG_BLK_DEV_CRYPTOLOOP=n
FILES:=$(LINUX_DIR)/drivers/block/loop.ko
AUTOLOAD:=$(call AutoLoad,30,loop)
endef
define KernelPackage/loop/description
Kernel module for loopback device support
endef
$(eval $(call KernelPackage,loop))
define KernelPackage/mvsas
SUBMENU:=$(BLOCK_MENU)
TITLE:=Marvell 88SE6440 SAS/SATA driver
DEPENDS:=@TARGET_x86 +kmod-libsas
KCONFIG:= \
CONFIG_SCSI_MVSAS \
CONFIG_SCSI_MVSAS_TASKLET=n
FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
endef
define KernelPackage/mvsas/description
Kernel support for the Marvell SAS SCSI adapters
endef
$(eval $(call KernelPackage,mvsas))
define KernelPackage/nbd
SUBMENU:=$(BLOCK_MENU)
TITLE:=Network block device support
KCONFIG:=CONFIG_BLK_DEV_NBD
FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
AUTOLOAD:=$(call AutoLoad,30,nbd)
endef
define KernelPackage/nbd/description
Kernel module for network block device support
endef
$(eval $(call KernelPackage,nbd))
define KernelPackage/nvme
SUBMENU:=$(BLOCK_MENU)
TITLE:=NVM Express block device
DEPENDS:=@PCI_SUPPORT
KCONFIG:= \
CONFIG_NVME_CORE \
CONFIG_BLK_DEV_NVME \
CONFIG_NVME_MULTIPATH=n \
CONFIG_NVME_HWMON=n
FILES:= \
$(LINUX_DIR)/drivers/nvme/host/nvme-core.ko \
$(LINUX_DIR)/drivers/nvme/host/nvme.ko
AUTOLOAD:=$(call AutoLoad,30,nvme-core nvme)
endef
define KernelPackage/nvme/description
Kernel module for NVM Express solid state drives directly
connected to the PCI or PCI Express bus.
endef
$(eval $(call KernelPackage,nvme))
define KernelPackage/scsi-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=SCSI device support
KCONFIG:= \
CONFIG_SCSI \
CONFIG_SCSI_COMMON@ge5.15 \
CONFIG_BLK_DEV_SD
FILES:= \
$(LINUX_DIR)/drivers/scsi/scsi_mod.ko \
$(LINUX_DIR)/drivers/scsi/scsi_common.ko@ge5.15 \
$(LINUX_DIR)/drivers/scsi/sd_mod.ko
AUTOLOAD:=$(call AutoLoad,40,scsi_mod scsi_common@ge5.15 sd_mod,1)
endef
$(eval $(call KernelPackage,scsi-core))
define KernelPackage/scsi-generic
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for SCSI generic
DEPENDS:=+kmod-scsi-core
KCONFIG:= \
CONFIG_CHR_DEV_SG
FILES:= \
$(LINUX_DIR)/drivers/scsi/sg.ko
AUTOLOAD:=$(call AutoLoad,65,sg)
endef
$(eval $(call KernelPackage,scsi-generic))
define KernelPackage/cdrom
TITLE:=Kernel library module for CD / DVD drives
KCONFIG:=CONFIG_CDROM
HIDDEN:=1
FILES:=$(LINUX_DIR)/drivers/cdrom/cdrom.ko
endef
$(eval $(call KernelPackage,cdrom))
define KernelPackage/scsi-cdrom
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for CD / DVD drives
DEPENDS:=+kmod-scsi-core +kmod-cdrom
KCONFIG:= \
CONFIG_BLK_DEV_SR \
CONFIG_BLK_DEV_SR_VENDOR=n
FILES:=$(LINUX_DIR)/drivers/scsi/sr_mod.ko
AUTOLOAD:=$(call AutoLoad,45,sr_mod)
endef
$(eval $(call KernelPackage,scsi-cdrom))
define KernelPackage/scsi-tape
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for scsi tape drives
DEPENDS:=+kmod-scsi-core
KCONFIG:= \
CONFIG_CHR_DEV_ST
FILES:= \
$(LINUX_DIR)/drivers/scsi/st.ko
AUTOLOAD:=$(call AutoLoad,45,st)
endef
$(eval $(call KernelPackage,scsi-tape))
define KernelPackage/iosched-bfq
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for BFQ I/O scheduler
KCONFIG:= \
CONFIG_IOSCHED_BFQ \
CONFIG_BFQ_GROUP_IOSCHED=y \
CONFIG_BFQ_CGROUP_DEBUG=n
FILES:= \
$(LINUX_DIR)/block/bfq.ko
AUTOLOAD:=$(call AutoLoad,10,bfq)
endef
$(eval $(call KernelPackage,iosched-bfq))
Reference in New Issue View Git Blame Copy Permalink