openwrt/target/linux/lantiq/dts/P2812HNUF1.dts
Mathias Kresin e07c80dfc8 lantiq: use aliases device tree node for leds
The chosen node is clearly the wrong place for aliases.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00

68 lines
1.1 KiB
Plaintext

/dts-v1/;
/include/ "P2812HNUFX.dtsi"
/ {
model = "P2812HNUF1 - ZyXEL P-2812HNU-F1";
aliases {
led-usb = &usb1;
led-usb2 = &usb2;
};
fpi@10000000 {
localbus@0 {
nand-parts@0 {
compatible = "gen_nand", "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
};
partition@40000 {
label = "uboot-env";
reg = <0x40000 0x20000>;
};
partition@60000 {
label = "kernel";
reg = <0x60000 0x200000>;
};
partition@260000 {
label = "ubi";
reg = <0x260000 0x7da0000>;
};
};
};
};
pcie@d900000 {
status = "disabled";
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT3062.eeprom";
};
gpio-leds {
usb1: usb1 {
label = "p2812hnuf1:green:usb1";
gpios = <&gpio 38 1>;
};
usb2: usb2 {
label = "p2812hnuf1:green:usb2";
gpios = <&gpio 44 1>;
};
};
};