openwrt/package/boot/uboot-envtools/files
Daniel González Cabanelas be0f1c1b26 mvebu: add support for Buffalo LinkStation LS220DE
The Buffalo LinkStation LS220DE is a dual bay NAS, based on Marvell
Armada 370

Hardware:
   SoC:         Marvell Armada 88F6707
   CPU:         Cortex-A9 800 MHz, 1 core
   Flash 1:     SPI-NOR 1 MiB (U-Boot)
   Flash 2:     NAND 512 MiB (OS)
   RAM:         DDR3 256 MiB
   Ethernet:    1x 1GbE
   USB:         1x 2.0
   SATA:        2x 3Gb/s
   LEDs/Input:  5x / 2x (1x button, 1x slide-switch)
   Fan:         1x casing

Flash instructions, from hard drive:
  1. Get access to the "boot" partition at the hard drive where the stock
     firmware is installed. It can be done with acp-commander or by
     plugging the hard drive to a computer.
  2. Backup the stock uImage:
         mv /boot/uImage.buffalo /boot/uImage.buffalo.bak
  3. Move and rename the Openwrt initramfs image to the boot partition:
         mv openwrt-initramfs-kernel.bin /boot/uImage.buffalo
  4. Power on the Linkstation with the hardrive inside. Now Openwrt will
     boot, but still not installed.
  5. Connect via ssh to OpenWrt:
         ssh root@192.168.1.1
  6. Rename boot files inside boot partition
         mount -t ext3 /dev/sda1 /mnt
         mv /mnt/uImage.buffalo /mnt/uImage.buffalo.openwrt.bak
         mv /mnt/initrd.buffalo /mnt/initrd.buffalo.bak
  7. Format ubi partitions at the NAND flash ("kernel_ubi" and "ubi"):
         ubiformat /dev/mtd0 -y
         ubidetach -p /dev/mtd1
         ubiformat /dev/mtd1 -y
  8. Flash the sysupgrade image:
         sysupgrade -n openwrt-squashfs-sysupgrade.bin
  9. Wait until it finish, the device will reboot with OpenWrt installed
     on the NAND flash.

Restore the stock firmware:
  1. Take the hard drive used for the installation and restore boot backup
     files to their original names:
         mount -t ext3 /dev/sda1 /mnt
         mv /mnt/uImage.buffalo.bak /mnt/uImage.buffalo
         mv /mnt/initrd.buffalo.bak /mnt/initrd.buffalo
  2. Boot from the hard drive and perform a stock firmware update using
     the Buffalo utility. The NAND will be restored to the original
     state.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-02-26 22:22:48 +01:00
..
apm821xx apm821xx: MBL: make mtd chip work 2022-06-19 12:31:02 +02:00
ath79 ath79: add support for Senao Engenius EWS660AP 2023-01-28 20:34:00 +01:00
cns3xxx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
fw_printsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
fw_setsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
imx_cortexa7 uboot-envtools: imx: cortexa7: add TechNexion PICO-PI-IMX7D 2022-07-11 14:28:03 +02:00
imx_cortexa9 uboot-envtools: move imx to imx_cortexa9 2021-11-03 12:45:40 +01:00
ipq40xx uboot-envtools: ipq40xx: fix WHW03V2 mtd partition 2023-01-18 00:07:30 +01:00
ipq806x uboot-envtools: Fix format of autogenerated sectors 2022-11-01 18:04:38 +01:00
ipq807x ipq807x: Add ZyXEL NBG7815 2023-01-19 13:26:15 +01:00
kirkwood kirkwood: add support for NETGEAR ReadyNAS Duo v2 2021-12-29 20:35:57 +01:00
lantiq uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
layerscape uboot-envtools: layerscape: drop redundant space after case keywords 2021-04-10 15:18:41 +02:00
mediatek_filogic uboot-envtools: filogic: bpi-r3: fix env selection 2023-01-29 03:43:58 +00:00
mediatek_mt7622 uboot-envtools: mt7622: bpi-r64: fix env selection 2023-01-29 03:43:58 +00:00
mediatek_mt7623 uboot-envtools: add configuration for UniElec U7623 board 2022-01-23 20:20:42 +00:00
mediatek_mt7629 mediatek: add support for ipTIME A6004MX Add basic support for ipTIME A6004MX. 2022-09-12 01:43:49 +01:00
mpc85xx uboot-envtools: add WS-AP3825i config 2022-04-26 00:57:22 +02:00
mvebu mvebu: add support for Buffalo LinkStation LS220DE 2023-02-26 22:22:48 +01:00
mxs uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
oxnas uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20 2022-03-21 20:16:16 +00:00
pistachio uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
qoriq qoriq: add support for WatchGuard Firebox M300 2021-12-21 21:37:46 +02:00
ramips ramips: add support for Senao Engenius EPG600 2023-02-18 16:55:35 +01:00
realtek uboot-envtools: add support for APRESIA ApresiaLightGS120GT-SS 2023-02-13 12:22:17 +01:00
uboot-envtools.sh uboot-envtools: add support for multiple config partitions 2021-04-08 09:20:59 +02:00